Product ID: SFP1000BXUST
The SFP1000BXUST is an MSA compliant upstream fiber SFP transceiver which pairs with StarTech.com's SFP1000BXDST. They are designed, programmed and tested to work with 1000BASE-BX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 1 GbE connectivity over fiber cabling.
This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.
All StarTech.com SFP & SFP+ transceiver modules are backed by a lifetime warranty and free lifetime multilingual technical support. StarTech.com offers a wide variety of SFP modules and direct-attach SFP Cables, providing the convenience and reliability you need to ensure dependable network performance.
|Connector(s)||1 - Local Unit Connectors||Fiber Optic LC Duplex|
|Environmental||Operating Temperature||0°C to 70°C (32°F to 158°F)|
|Storage Temperature||-40°C to 85°C (-40°F to 185°F)|
|Industry Standards||IEEE 802.3z 1000BASE-BX|
|Packaging Information||Package Length||11,6 cm [4,6 in]|
|Package Width||92,0 mm [3,6 in]|
|Package Height||34,0 mm [1,3 in]|
|Shipping (Package) Weight||48,0 g [1,7 oz]|
|Performance||Maximum Data Transfer Rate||1.25 Gbps|
|Max Transfer Distance||10 km (6.2 mi)|
|Fiber Operating Mode||Full-Duplex|
|Compatible Networks||1000 Mbps (1 Gbps)|
|Power Consumption (In Watts)||< 1 W|
|Physical Characteristics||Product Length||57,0 mm [2,2 in]|
|Product Width||14,0 mm [0,6 in]|
|Product Height||1,3 cm [0,5 in]|
|Weight of Product||19,0 g [0,7 oz]|
|What's in the Box||1 - Included in Package||SFP transceiver|
Ensure the Network Device is running a compatible Firmware Version on a compatible Operating System. Please consult the manufacturer of the Network Device for more information regarding the minimum required or recommended system software.
SFP fiber transceivers (mini-GBIC) are specific to applications and therefore, you need to select the correct fiber transceiver for your application. StarTech.com offers a few types of fiber transceivers: Cisco®, Cisco Meraki®, HP®, and Juniper® compatible, as well as standard gigabit SFP converters. Although the transceivers may be referred to as GBIC or mini-GBIC, the correct terminology for the device is small form-factor pluggable transceiver or SFP . StarTech.com does not carry GBIC converters.
If your device is not a Cisco device, it can still use Cisco compatible SFPs. Cisco SFPs are specifically coded to be compatible with Cisco devices. A standard SFP will not work in a Cisco device.
StarTech.com offers two different output connector types for SFPs: RJ-45 and fiber.
No special requirements are necessary to use RJ-45 SFPs. However, if you use fiber transceivers, the following items need to be the same as the interconnecting equipment:
The connector type, such as LC, SC, or ST.
The mode (single mode or multi mode).
The wavelength, such as 850 nm, 1310 nm, or 1550 nm.
The DDM support.
The speed, such as 10Gbps.
Note: The properties listed above cannot be converted or changed by a cable, excluding the connector type.
Upstream and downstream SFPs function the same way as other SFPs, except that they use Wavelength-Division Multiplexing (WDM). WDM allows for the transmitting and receiving signals to co-exist on the same fiber strand. This allows a single fiber cable strand to simultaneously transmit and receive a signal.
You must use upstream and downstream SFPs in pairs. You cannot use two upstream or two downstream SFPs together.
UPC and APC are fiber connector types. UPC (Ultra Physical Contact) connectors have a fiber connector end face that has been polished to a dome-shape. APC (Angled Physical Contact) connectors have a fiber connector end face that has been polished at an eight degree angle. When building fiber solutions, be sure to avoid mixing UPC and APC connectors. UPC and APC cannot mate with one another because causes the fiber cores don’t touch. This can cause a degraded connection or none at all.
StarTech.com fiber products use UPC connectors.