Product ID: PCI1S650PW
The PCI1S650PW 1 Port PCI RS232 Powered Serial Adapter Card offers an easy way to add self-powered serial devices to your computer, POS solution, or manufacturing application.
The adapter provides a high-performance serial port that can be configured to deliver 5 or 12 volts of power to compatible devices, and for additional flexibility, this card can be used in PCI (5 volt) or PCI-X (3.3 volt) expansion slots and supports both Windows® (including 64-bit editions) and Linux environments.
Backed by a StarTech.com lifetime warranty and free lifetime technical support.
|Connector(s)||1 - Connector Type(s)||PCI / PCI-X (Universal 3.3 & 5V, 32-bit)|
|1 - Internal Ports||SP4 (4 pin, Small Drive Power)|
|1 - External Ports||DB-9 (9 pin, D-Sub)|
|Environmental||Operating Temperature||0°C to 60°C (32°F to 140°F)|
|Storage Temperature||-20°C to 85°C (-4°F to 185°F)|
|Bus Type||PCI / PCI-X (5 / 3.3V)|
|Card Type||Standard Profile (LP bracket incl.)|
|Port Style||Integrated on Card|
|Chipset ID||Sunix - SUN1889|
|Packaging Information||Package Length||8.3 in [21 cm]|
|Package Width||1.6 in [40 mm]|
|Package Height||5.6 in [14.2 cm]|
|Shipping (Package) Weight||0.4 lb [0.2 kg]|
|Max Baud Rate||115.2 Kbps|
|Physical Characteristics||Product Length||4.7 in [12 cm]|
|Product Width||0.7 in [17 mm]|
|Product Height||2.0 in [5 cm]|
|Weight of Product||1.8 oz [50 g]|
|Software||OS Compatibility||Windows® 8 (32/64), 7 (32/64), Vista (32/64), XP (32/64), XP Embedded, POS Ready 2009, Embedded System 2009, CE 6.0/5.0, ME, NT, 98SE, 95, DOS
Windows Server® 2012, 2008 R2, 2003 (32/64)
|Microsoft WHQL Certified||Yes|
|Special Notes / Requirements||System and Cable Requirements||IBM-compatible computer|
|Available PCI or PCI-X slot (full size or low profile)|
|What's in the Box||1 - Included in Package||PCI1S650PW serial card|
In stock: CA: 143 | US: 833
Convert a DB9 male port to a DB25 female port
In stock: CA: 1 | US: 2752
Convert a DB9 male port to a DB25 male port
In stock: CA: 92 | US: 4832
In stock: CA: 141 | US: 1730
Transfer files via serial connection
In stock: CA: 117 | US: 7389
Connect two DB9 equipped serial devices
In stock: CA: 0 | US: 3732
When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.
Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the serial ports and serial device, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Ports (COM & LPT).
Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.
Perform a serial loopback test. See this FAQ on how to perform a RS-232 serial loopback test: http://www.startech.com/faq/serial_loopback_test_rs232_windows
To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:
Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.
If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
For products related to this article, click here.
To confirm that Windows detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.