10g Silicone Thermal CPU Paste Tube

Provide improved heat transfer between CPU and heatsink through a silicon compound


0 stars (0 reviews) |
  • Ceramic-based compound containing silicon
  • Thermal conductivity of more than 1.066W/m-K

This thermal paste can be used to improve the effectiveness of a CPU cooler by thermally bonding the CPU to the heatsink, allowing the heatsink and fan to work at their full capacity to remove harmful heat from the CPU.


  • Replace old or dried out thermal paste
  • System builders who put together many low-end to mainstream systems

The StarTech.com Advantage

  • Improves the heat transfer between a CPU and heatsink to keep the CPU running cooler
  • Effectively fills surface imperfections on CPU to prevent air pockets and help heat transfer
  • Ceramic based compound that is electrically non-conductive for safe use around electronics

Partner Numbers

  • UPC 065030785686


Warranty Information Warranty 2 Years
Environmental Operating Temperature -20°C to 100°C (-4°F to 212°F)
Storage Temperature -50°C to 150°C (-58°F to 302°F)
Humidity 10% ~ 80% RH
Packaging Information Package Length 3.3 in [83 mm]
Package Width 0.9 in [22 mm]
Package Height 6.1 in [15.4 cm]
Shipping (Package) Weight 0.1 lb [0.0 kg]
Performance Thermal Conductivity >1.066 W/(m·K)
Thermal Resistance <0.195°C-m2/W
Bleed <0.05% at 200°C/24 hours
Evaporation <0.001% at 200°C/24 hours
Specific Gravity 2.3
Physical Characteristics Color White
Product Length 1.2 in [30 mm]
Product Width 2.8 in [72 mm]
Product Height 0.7 in [1.8 cm]
Weight of Product 0.5 oz [14 g]
What's in the Box 1 - Included in Package Tube of Silicone Heat Grease Compound


Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)


Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(0 reviews)
0 out of 5 stars
  • 5 (0)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (0)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

Back to top