Product ID: SAT2510U3S
The SAT2510U3S 2.5in Hard Disk Drive Enclosure for SAT2510U3REM is a spare SATA drive enclosure for use with the SAT2510U3REM Removable Hard Drive Backup System/Mobile Rack, which simplifies removing/rotating drives, and is also backward compatible with the USB 2.0 model, .
This 2.5" SATA enclosure allows for native SATA connectivity (SATA 6 Gbps compliant) while mounted inside the SAT2510U3REM backup system, but also provides SuperSpeed USB 3.0 connectivity (with up to 5 Gbps of data bandwidth) when used externally.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Drive Connectors||SATA Data & Power Combo (7+15 pin)|
|1 - Host Connectors||SATA Data & Power Combo (7+15 pin)|
|USB 3.0 Micro-B (10 pin, SuperSpeed)|
|Environmental||Operating Temperature||0°C to 40°C (32°F to 104°F)|
|Storage Temperature||-20°C to 70°C (-4°F to 158°F)|
|Humidity||5% ~ 95% RH|
|Number of Drives||1|
|Compatible Drive Types||SATA|
|Chipset ID||ASMedia - ASM1053
ASMedia - ASM1456
|Indicators||1 - LED Indicators||Power/Activity (Green)|
|Packaging Information||Package Height||1.7 in [42 mm]|
|Package Length||7.4 in [18.8 cm]|
|Package Width||6.0 in [15.2 cm]|
|Shipping (Package) Weight||0.6 lb [0.3 kg]|
|Performance||Type and Rate||USB 3.0 - 5 Gbit/s|
|SATA III (6 Gbps)|
|Material||Aluminum and Plastic|
|Max Drive Height||0.4 in [9.5 mm]|
|Product Length||5.2 in [13.3 cm]|
|Product Width||3.1 in [79.1 mm]|
|Product Height||0.6 in [1.6 cm]|
|Weight of Product||4.3 oz [122 g]|
|Software||OS Compatibility||OS independent; No software or drivers required|
|What's in the Box||1 - Included in Package||2.5" SATA Enclosure for SAT2510U3REM|
|USB 3.0 A to Micro-B Cable|
Turn a 2.5in SATA drive into a front bay mounted removable HDD backup solution
When you troubleshoot issues with a hard drive rack, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
When you test the hard drive and hard drive rack, it is recommended that you do the following:
Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.
Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.
To confirm that the Mac OS detects your USB device, complete the following:
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.