Product ID: SAT32M225
Vastly increase system performance by adding the speed of an M.2 SSD in any 2.5" SATA application, with the SAT32M225 M.2 SSD to SATA adapter.
Utilize the full potential of your SATA III controller, with an M.2 SSD reducing your data transfer bottleneck with file transfer speeds up to 6 Gbps. M.2 SSDs can also save you money by reducing your power consumption over regular platter drives.
Help protect the health of your drive with an open-frame design that maximizes heat dissipation.
The SAT32M225 is backed by a StarTech.com 2-year warranty, and lifetime technical support.
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(s) | 1 - Drive Connectors | M.2 (SATA, B-Key, NGFF) |
1 - Host Connectors | SATA Data & Power Combo (7+15 pin) | |
Environmental | Operating Temperature | -40°C to 85°C (-40°F to 185°F) |
Hardware | Interface | SATA |
Number of Drives | 1 | |
Compatible Drive Types | M.2 (SATA, B-Key, NGFF) | |
Drive Installation | Fixed | |
Supported Drive Height(s) | 2230 | |
2242 | ||
2260 | ||
2280 | ||
Packaging Information | Package Height | 1,3 in [32 mm] |
Package Length | 5,7 in [14,5 cm] | |
Shipping (Package) Weight | 3,6 oz [102 g] | |
Package Width | 6,9 in [17,5 cm] | |
Performance | Maximum Data Transfer Rate | 6 Gbps |
Type and Rate | SATA III (6 Gbps) | |
Hardware Raid Supported | No | |
Hot Swap Capability | No | |
General Specifications | Not compatible with M.2 NVMe or AHCI PCI-Express SSDs | |
Physical Characteristics | Weight of Product | 1,3 oz [36 g] |
Product Length | 3,9 in [100 mm] | |
Product Width | 2,8 in [70 mm] | |
Product Height | 0,3 in [7 mm] | |
Software | OS Compatibility | OS independent; No software or drivers required |
What's in the Box | 1 - Included in Package | M.2 NGFF SSD to 2.5in SATA SSD Converter |
Mounting screw kit | ||
Installation manual |
This high quality SATA cable is designed for connecting SATA drives even in tight spaces.
Power your Internal SATA hard drive from an LP4 connector on your Power Supply
This high quality SATA cable is designed for connecting SATA drives even in tight spaces.
A space-saving, latching right angle SATA hard drive cable, for installations in tight spaces.
Power two SATA drives from a single LP4 power supply connector.
Connect an IDE hard drive to a Serial ATA power connector
Make a right-angled connection to your SATA drive, for installation in tight spaces
Make a left-angled connection to your SATA drive, for installation in tight spaces
Make a right-angled connection to your SATA drive, for installation in tight spaces
Mount a 2.5in SATA hard drive to any computer with an available 3.5in bay
Mount two 2.5in SATA SSDs/HDDs into a single 3.5in drive bay
We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)To confirm that the Mac OS detects your USB device, complete the following:
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
Although M.2 SSDs come in similar form factors, only an M.2 SATA drive with an NGFF B key will operate with this device. M.2 drives that are PCIe or have a different key position are not compatible with this device.
This device can adapt an M.2 SATA drive to standard SATA connections, which is not possible for a PCIe based M.2 drive. The key type refers to the connector type on the M.2 SATA drive. B key can be M.2 PCIe x2 or SATA, so it is important that you check the specifications of the drive to see if it supports SATA.
Check out our review guidelines.