Everything is hooked up but nothing is working. What should I do? (Windows)

Question

Everything is hooked up but nothing is working.  What should I do? (Windows)

Accepted Answer

When you troubleshoot issues with a FireWire controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

FireWire cables
FireWire devices
FireWire controller card

To test your setup components, try the following:

Use the FireWire cables, devices, and controller card in another setup to see if the problem is with the components or the setup.
Use a different FireWire cable, device, and controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the FireWire device and controller card, it is recommended that you do the following:

Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your devices are listed under IEEE 1394 controllers.
If you do not see the FireWire controller card listed in Device Manager, refer to the following FAQ: https://www.startech.com/en-us/faq/pci-pcie-cannot-boot-os-or-detect-windows.

Display & Video Adapters

Universal Laptop Docking Stations

Privacy Screen Filters

USB Hubs

Display Mounts and Ergonomics

Audio-Video Products

Cables

Server Management

Hard Drive Accessories

Add-on Cards & Peripherals

Networking IO Products

Computer Parts

Browse By Application

Browse By Technology

Additional Resources

Contact

Information

Additional Resources