Product ID: SATDUP11
The SATDUP11 standalone hard drive duplicator eraser enables you to copy 1-to-1, or erase up to 2 SATA hard drives simultaneously without a host computer.
Featuring three modes of standalone drive duplication including Data Only, All Partitions, and Sector by Sector, the HDD copier offers high performance duplication, and has been tested for speeds up to 14GB per minute.
As a hard drive eraser the SATDUP11 is capable of erasing two drives simultaneously with several different modes available including Quick Erase, Secure Erase, and Single-Pass / Three-Pass Hard Drive Overwrite (DoD) -- which passes over the hard drive 3 times to ensure that the data has been completely wiped.
Complete with integrated LCD display, and support for 2.5” and 3.5” SATA I/II/III hard drives (HDD) and Solid State Drives (SSD), the SATDUP11 is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing.
For added compatibility with different drive types in duplication and quick erase applications, the SATDUP11 supports the use of various drive adapters. The below list of StarTech.com adapters have been specifically tested, to ensure compatibility with this drive duplicator:
The SATDUP11 features high quality aluminum construction, and is backed by a 2-year StarTech.com warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||Drive Connectors||2 - SATA Data & Power Combo (7+15 pin)|
|Environmental||Operating Temperature||5°C to 45°C (41°F to 113°F)|
|Storage Temperature||-20°C to 85°C (-4°F to 185°F)|
|Humidity||20% ~ 80%|
|Hardware||Number of Drives||2|
|Drive Size||2.5in & 3.5in|
|Compatible Drive Types||SATA|
|Indicators||LED Indicators||1 - Source Drive Power Indicator|
|1 - Source Drive Activity Indicator|
|1 - Source Drive Error Indicator|
|1 - Destination Drive Power Indicator|
|1 - Destination Drive Activity Indicator|
|1 - Destination Drive Error Indicator|
|1 - LCD Display|
|Packaging Information||Package Height||123 mm [4,8 in]|
|Package Length||26,5 cm [10,4 in]|
|Package Width||18,7 cm [7,4 in]|
|Shipping (Package) Weight||1,6 kg [3,5 lb]|
|Performance||Maximum Data Transfer Rate||14 GB per minute|
|Duplication Modes||System and File|
|Erase Modes||Quick Erase|
|Max Drive Capacity||Currently tested with up to 4TB 7200 RPM 3.5" hard drives per bay and 1TB 7200 RPM 2.5" hard drives per bay|
|Duplication Modes||All Partitions|
|Erase Modes||1-Pass Overwrite (NIST SP 800-88 Rev 1 - Clear)|
|Duplication Modes||Sector by Sector (Whole Drive)|
|Erase Modes||3-Pass Overwrite|
|Duplication Modes||Percentage Copy|
|Erase Modes||3-Pass Erase and Compare|
|Product Length||8 cm [3,1 in]|
|Product Width||130 mm [5,1 in]|
|Product Height||3 cm [1,2 in]|
|Weight of Product||358 g [12,6 oz]|
|Power||Power Source||AC Adapter Included|
|Input Voltage||100 - 240 AC|
|Output Voltage||12V DC|
|Center Tip Polarity||Positive|
|Power Consumption (In Watts)||60|
|Software||OS Compatibility||OS independent; No software or drivers required|
|Special Notes / Requirements||Note||
For duplication, the destination drive must be of equal or greater size than the source drive.
Speed of up 14 GB per minute was achieved in a bench mark testing environment, actual speed will depend on hard drive model, algorithm and other factors. Results will vary.
|What's in the Box||Included in Package||1 - Hard Drive Duplicator and Eraser|
|2 - SATA Cables|
|1 - Universal Power Adapter|
|3 - Regional Power Cords (NA/UK/EU)|
|2 - HDD Pad|
|1 - Quick Install Guide|
Use your 2.5in or 3.5in IDE hard drives in a SATA HDD Docking Station
Provide protection against shocks/impacts to a 2.5in hard drive
Convert an mSATA mini-SSD into a Standard 2.5in SATA SSD
Turn Virtually any 2.5" SATA or SAS Hard Drive into a 3.5" SATA Drive
Provides safe handling and anti-static protection for most 2.5in hard drives
Provide protection against shocks/impacts to a 3.5in hard drive
Replace your lost or failed power adapter
When you troubleshoot issues with a hard drive dock or duplicator, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
When you test the hard drive and hard drive dock or duplicator, it is recommended that you do the following:
Note: For a hard drive duplicator you may need to switch the device to PC mode (if available).
Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.
Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.
You do not need to format your target hard drive before you begin to duplicate it, because the target hard drive is automatically overwritten during the duplication process.
The hard drive duplicator copies the exact partition from the source drive to the target drive. Since it is required that you use a target drive that is equal or larger in size than the source drive a portion of the target drive appears as free space. You can append free space to the live partition on the target drive so that the full size of the drive can be utilized.
Note: A partition cannot be extended on an operating system drive that is in use. You must extend the partition when it not being used by the operating system, and ideally when it is still connected to the duplicator.
Note: Do not extend a System Reserved partition. Only extend the primary partition, which is typically the largest in size and formatted with NTFS or FAT32.
After you have successfully duplicated a drive and the target drive is still connected to your computer system (for example, through the duplicator), complete the following:
The primary partition on the drive now uses the entire drive area.
StarTech.com hard drive duplicators only read from the source drive and only write to the target drives while in standalone duplication mode . A duplication that fails or halts will not cause a problem with the source drive.
You can use this device to duplicate an internal hard drive with the stand alone duplicator function if you remove the hard drive from the computer and connect it directly to this device.
Some old hard drives (often low capacity as well) may not work because they use an old IDE standard not supported by the duplicator. Use a newer drive to determine if the duplicator works or if the drive is not compatible.
StarTech.com hard drive and flash drive duplicators perform a sector by sector copy, which means that the target drive must be the exact same size (down to the sector) or larger than the hard drive or flash drive that is being copied. During a sector by sector copy, each individual sector is copied over to the target drive, regardless of whether or not any data is present. A 500 GB hard drive with 50 GB of data on it will take the same amount of time to copy as a 500 GB hard drive with 450 GB of data on it.
If you have two hard drives or flash drives that are listed as the same size but are different makes or models, you need to check how large both drives are down to the sector to ensure that the target drive is the exact same size or larger.
Solid-state drives (SSDs) use SATA connectors to access power and transfer data. Any duplicator that can copy to or from SATA hard drives will work with a StarTech.com duplicator.
Note: If you use a dock to duplicate SSDs, keep in mind that the StarTech.com disk duplicators execute a sector by sector read and write. SSDs are rated by a number of reads and writes. Repeated duplication and sector by sector reads and writes of SSDs can reduce the life cycle of the drive.
Software-level encryption on the drive poses no issue to StarTech.com duplicators, as the duplicators copy encrypted data sector by sector over to the new drive.
Hardware-level encryption or BIOS level hard drive locks cause the duplication to halt and fail, as the drive is unable to read or write the sectors that are encrypted.
Duplication of Hidden Protected Area (HPA) Partitions or Extended Industry Standard Architecture (EISA) cause the duplicator to halt and fail, as the drive cannot read and write the protected partitions on the drive.
Note: Our UNIDUPDOCK, SATDOCK22RE and SATDOCK4U3RE do include the ability to copy HPA partitions, but the duplication is still dependent on how the HPA partition is written to the hard drive, whether or not it is encrypted and how it is encrypted.
StarTech.com duplicators were not designed to recover failing or damaged drives. If the duplicator encounters a corrupt or unreadable sector, the duplication halts and fails. If the source drive has bad sectors, use the Read Error Skip feature if your model of duplicator has it; however, if there are too many errors, it may still halt and fail even with this feature. If this happens, you will need third-party recovery software or custom-built recovery hardware to copy from a failing or damaged drive.
Quick and secure erase functions
Quick erase and secure erase are functions the duplicators call on the hard drives themselves. How they work depends on the manufacturer of the hard drive.
Department of Defense erase function
A Department of Defense (DoD) erase is a function performed by the duplicator where it does three passes. The first pass writes all 0s. The second pass writes all 1s. The third pass writes 0s and 1s randomly.
Note: Not all duplicators will feature all of these erase modes. It is important to review the product manual to confirm the available erase modes.
To determine if your hard drive will work in this device, on the product page, click the Technical Specifications tab, and do the following:
Check out our review guidelines.