Product ID: SATSASTRAYBK
The SATSASTRAYBK Hot Swap Hard Drive Tray is specially designed as a spare/extra 2.5in/3.5in SATA/SAS Hard Drive Tray for the SATSASBAY3BK (3 Drive Hot Swap SAS SATA Backplane) allowing you to use extra spare/replacement hard drives in addition to what is installed in the backplane/mobile rack.
To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
This extra hard drive tray features an upgraded design with additional air vents and specially designed vibration dampening springs, providing the ideal replacement for misplaced trays or a convenient solution for having extra hard drives available for your storage solution.
|Warranty Information||Warranty||2 Years|
|Packaging Information||Package Height||32,0 mm [1,3 in]|
|Package Length||17,1 cm [6,7 in]|
|Package Width||12,3 cm [4,8 in]|
|Shipping (Package) Weight||153,0 g [5,4 oz]|
|Material||Aluminum and Plastic|
|Product Length||16,0 cm [6,3 in]|
|Product Width||11,5 cm [4,5 in]|
|Product Height||27,0 mm [1,1 in]|
|Weight of Product||115,0 g [4,1 oz]|
|Software||OS Compatibility||OS independent; No software or drivers required|
|What's in the Box||1 - Included in Package||Drive Tray|
|Bag of drive mounting screws (2.5in/3.5in)|
Hot Swap up to three 3.5in SAS or SATA hard drives in and out of this removable backplane; features 3-in-2 design, that requires only two 5.25in drive bays
Although mobile racks can enable a Serial Attached SCSI (SAS) drive to connect using a standard Serial ATA (SATA) connector, the hard drive controller must be SAS compatible to properly support SAS drives. SAS controllers can work with SAS and SATA drives, but most SAS drives will only work with a SAS controller.
For further information about SAS and SATA interoperability, refer to the following FAQ: http://www.startech.com/faq/hard_drive_controllers_sas_drive_compatibility.