OAM Managed Gigabit Ethernet Fiber Media Converter - Multi Mode LC 550m - 802.3ah Compliant

Convert and extend a Gigabit Ethernet connection over Multimode LC fiber with remote management capabilities

Product ID: ET91000LCOAM

0 stars (0 reviews) |
  • Supports standalone operation, or installation into the ETCHS2U Rackmount Chassis
  • Supports 802.3ah OAM In-band management for monitoring connection status
  • Gigabit Multi Mode LC SFP installed (up to 550m)
Your price
€301,99 EUR excl. VAT
€377,49 EUR incl. VAT

 

The ET91000LCOAM Managed Fiber Media Converter lets you extend a Gigabit Ethernet connection over Multimode LC fiber, with the added benefit of remote management capabilities.

 

Compliant with 802.3ah OAM (Operations, Administration & Management), this managed media converter incorporates an easy-to-use web interface for operation, administration and maintenance, enabling you to quickly determine the location of failing links and the fault conditions without sending service personnel to the physical location of the device.

An effective solution for connecting a Gigabit Ethernet (1000Base-T) network to remote network segments over a (1000Base-LX/SX) fiber backbone, the Ethernet to fiber converter supports full Gigabit speeds at distances of up to 550m (1804ft) through the installed Multi-Mode LC SFP. The converter also features an all-steel chassis, for durability in harsh environments.

For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis(ETCHS2U), as well as a replaceable MSA-compliant SFP slot.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Applications

  • Provides connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether
  • Perfect for secure connections required by government agencies where EMI is not acceptable
  • Extend network connectivity to remote areas of stadiums, auditoriums or other venues
  • Connect traffic control or monitoring systems to a main office, even from extreme distances

The StarTech.com Advantage

  • Adjust settings and monitor the link remotely with OAM management capabilities
  • Operates as standalone device or can be installed into the ETCHS2U 20 slot chassis for added versatility
  • Rugged steel casing for durability in harsh environments

Partner Numbers

  • Ingram Micro Sweden V933054
  • UPC 065030854566

Specifications

Warranty Information Warranty 2 Years
Connector(s) 1 - Local Unit Connectors Fiber Optic LC Duplex
RJ-45
Environmental Operating Temperature 0°C to 60°C (32°F to 140°F)
Storage Temperature -10°C to 70°C (14°F to 158°F)
Humidity 10~90% RH (Non-condensing)
Hardware PoE No
WDM No
Industry Standards IEEE 802.3z 1000BASE-SX
IEEE 802.3z 1000BASE-LX
IEEE 802.3ab 1000BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3 10BASE-T
IEEE 802.3ah EFM
Packaging Information Package Height 92 mm [3,6 in]
Package Length 20,6 cm [8,1 in]
Package Width 13,6 cm [5,4 in]
Shipping (Package) Weight 789 g [27,9 oz]
Performance Maximum Data Transfer Rate 1.25 Gbps
Max Transfer Distance 550 m (1804 ft)
Type Multi Mode
Wavelength 850nm
Fiber Operating Mode Full-Duplex
DDM No
Compatible Networks 1000 Mbps (1 Gbps)
Auto MDIX Yes
MTBF 65,000 Hrs
Physical Characteristics Color Black
Material Steel
Product Length 16,3 cm [6,4 in]
Product Width 87 mm [3,4 in]
Product Height 23 mm [0,9 in]
Weight of Product 411 g [14,5 oz]
Power Power Source AC Adapter Included
Input Voltage 100 - 240 AC
Input Current 0.36 A
Output Voltage 12V DC
Output Current 1.6 A
Center Tip Polarity Positive
Plug Type M
Power Consumption (In Watts) 12
What's in the Box 1 - Included in Package Fiber Media Converter
Universal Power Adapter (NA/EU/UK/AU)
Grounding Screw
Instruction Manual

Accessories

Discontinued
SFPG1340C

Cisco Compatible Gigabit Fiber SFP Transceiver Module SM LC w/ DDM – 40 km (Mini-GBIC)

Add, replace or upgrade SFP modules on Gigabit fiber equipment

Your price
€154,99 EUR excl. VAT
€193,74 EUR incl. VAT
Your price
€76,99 EUR excl. VAT
€96,24 EUR incl. VAT
ETCHS2U

20-Slot 2U Rack Mount Media Converter Chassis for ET Series 2 Fiber Media Converter

Add an un-managed, 20-slot media converter chassis to your rack or cabinet

Your price
€1 012,99 EUR excl. VAT
€1 266,24 EUR incl. VAT
Your price
€62,99 EUR excl. VAT
€78,74 EUR incl. VAT
Discontinued
SFPG1580C

Cisco Compatible Gigabit Fiber SFP Transceiver Module SM LC w/ DDM – 80 km (Mini-GBIC)

Add, replace or upgrade SFP modules on Gigabit fiber equipment

Your price
€181,99 EUR excl. VAT
€227,49 EUR incl. VAT
SVA12M2NEUA

DC Power Adapter - 12V, 2A

Replace your lost or failed power adapter

Your price
€24,99 EUR excl. VAT
€31,24 EUR incl. VAT
SVA12M5NA

DC Power Adapter - 12V, 5A

Replace your lost or failed power adapter

Your price
€62,99 EUR excl. VAT
€78,74 EUR incl. VAT

Drivers/Downloads

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Firmware

Manual(s):

Datasheet

Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Frequently Asked Questions

Troubleshooting

When you troubleshoot issues with a fiber media converter, there are some quick tests that you can complete to rule out potential problems. To identify what the source of the issue is, observe the power LED, LAN LEDs, and fiber link LED on the units.

If the power LED is not illuminated for the transmitter or the receiver, complete the following:

  • Make sure that you are using the provided power adapter(s).

  • Make sure that the adapter is plugged into a compatible wall outlet.

  • Make sure that the adapter is plugged into both the transmitter and receiver.

If another LED is not operating as expected, make sure that the components in your setup are working correctly. To test your setup components, try the following:

  • Use the cables, fiber media converter, and network devices (including SFPs, if applicable) in another setup to see if the problem is with the components or the setup.

  • Use different cables, fiber media converter, and network devices (including SFPs, if applicable) in your setup to see if the problem persists. Ideally, you should test components that you know work in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

Make sure that the DIP switches are set to the following:

  • DIP switches should be identical on both local and remote units. By default, DIP switches are set to Off (the switch is pointing up).

  • For more information about the advanced configuration options, refer to the manual for your product.

If you cannot establish a network connection between your local and remote units, you need to do the following to make sure that the issue is not related to the network configuration:

  • Use two computer systems directly connected to the fiber media converter LAN ports.

  • Open a command prompt on Computer 1 and ping Computer 2.

If the issue is not related to the network configuration, you should receive a response from Computer 2.

 

For more information on how to ping another network device, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=networking#ping-test-windows-mac-os.

You should not upgrade your device's firmware if you do not have any issues with the functionality of your device. The only time you should consider an upgrade is if you are experiencing a problem with the device, and you have confirmed that the firmware addresses this problem.  You can confirm this is the case by reviewing the documentation included with the firmware or by consulting with our Technical Support team. Incorrectly upgrading firmware can result in diminished performance so it is best to contact StarTech.com if you would like to perform this operation.

Before You Buy

Different optical cables are needed for different applications. Before you select a cable to interconnect fiber devices, make sure that the following things match:

  • Mode: Single Mode or Multi Mode.

  • Wavelength: For example, 850 nm, 1310 nm, or 1550 nm.

Note: The above properties cannot be converted or changed by a cable.

When you select a cable, make sure that the cable ends (for example, LC, SC, ST, or MT) match the fiber media devices.

Simplex and duplex ends are available for most connector types. Simplex cables have the connectors separate, where duplex cables have the transmit (TX) and receive (RX) connectors joined together.  StarTech.com fiber media devices are compatible with simplex and duplex connectors.

It does not matter which diameter or OM classification the cable uses, as long as it meets the mode requirement.

Fiber media converters can be used to convert a standard Ethernet connection to a standard fiber connection, or can be used to extend a copper Ethernet network. When you use fiber media converters to extend a copper Ethernet network, make sure that the same fiber standards are being used on either end of the fiber network.

Note: Terms like 1000BASE-LX, 100BASE, 1000BASE, and 10GBASE refer to how fast the data can transfer, with 100BASE being 100Mb/s, 1000BASE being 1000Mb/s or 1GB/s, and 10GBASE being 10Gb/s. FX, SX, LX, and SR refer to different fiber standards and use different wavelengths (among other things).

Fiber media converters come in different types for different applications. You need to consider the specifications for both network devices before you can select the correct fiber media converters.

A fiber media converter can be used to simply convert fiber to copper (for example, 100BASE-FX to 100BASE-TX), convert copper to fiber, or it can be used to extend a copper network over fiber optic cabling. If you use an application that uses fiber media converters, the copper and fiber industry standards must match.

The following is an example of a working fiber to copper setup:

  • A network switch that has an LC fiber output using 1000BASE-LX is connected to an LC fiber cable that patches into the ET1000S40LC2, which is compatible with 1000BASE-LX/SX. The connected copper device is 1000BASE-T.

If the copper device in the above setup is 10/100 (100BASE-T), no copper link would be detected.

Note: Some media converters do not auto-negotiate copper or fiber standards, which limits the device to 10/100 or gigabit operation. For more information, check the specifications of the media converter.

When you use the fiber media converter in a network extender setup, it works best if you use the same media converter on either end. As long as the fiber standards match, you can use different connectors and the fiber network will be created between the units.

The following are some examples of available fiber connector types:

  • LC
  • SC
  • ST
  • Open SFP

The Open SFP units (referred to as Open on the Fiber Media Converter Drilldown) can use any mini-GBIC or SFP compatible fiber transceiver. The ET LC fiber media converters include LC SFPs, which makes the unit an open SFP, if required.

UPC and APC are fiber connector types. UPC (Ultra Physical Contact) connectors have a fiber connector end face that has been polished to a dome-shape. APC (Angled Physical Contact) connectors have a fiber connector end face that has been polished at an eight degree angle. When building fiber solutions, be sure to avoid mixing UPC and APC connectors. UPC and APC cannot mate with one another because causes the fiber cores don’t touch. This can cause a degraded connection or none at all.

StarTech.com fiber products use UPC connectors.

Compliance and safety

Compliance letters

  • WEEE
    • Language: English
  • RoHS
    • Language: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(0 reviews)
0 out of 5 stars
  • 5 (0)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (0)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

Feedback Back to top