Product ID: ST10GPEXNDPI
This dual-port network card offers versatile and cost-efficient network connectivity, by increasing the available network bandwidth without having to replace your existing cabling infrastructure. The 5-speed network card lets you add two 10G/NBASE-T RJ45 ports to your server or desktop computer and access your network at multiple speeds: 10G, 5G, 2.5G, 1G, and 100Mbps.
Compatible with a broad range of operating systems, this versatile dual-port NIC is ideal for many business applications that require upgrades to servers or workstations. Fully compliant with 10GBASE-T and NBASE-T™ specifications, the network card is a cost-effective way to enhance your server or computer capabilities by adding two powerful 10-Gigabit Ethernet ports. (10G network speeds require Cat6a cable. All other speeds require Cat5e cable.)
The network card supports advanced NBASE-T technology, compatible with the latest multi-gigabit Ethernet switches and routers, such as new Cisco campus switches (including Catalyst 4500E, 3850 and 3560-CX). The card enables you to connect to NBASE-T based equipment at network speeds of 2.5Gbps or 5Gbps, over your existing Cat5e infrastructure, without having to upgrade to more expensive Cat6a.
NBASE-T technology accelerates the speed of twisted pair Cat5e copper cabling over a distance of up to 100 meters. The Ethernet network card also supports 10Gbps network speeds if using Cat6a cabling, and 1Gbps network speeds if using Cat5e (or better) cabling.
The Ethernet ports are based on the Intel® X550 chipset, designed to deliver the power, performance, and enhanced capabilities you need for reliable network connections to your server or computer. The network card also supports advanced features including 9K jumbo frames and 802.1q VLAN tagging.
With a dual-profile design, the PCI Express network card installs easily into a wide range of computer/server chassis, regardless of form factor. The card comes equipped with a standard-profile bracket for installation in a full-sized chassis and includes a low-profile/half-height bracket for installation in small form-factor computers.
The ST10GPEXNDPI dual-port network card is backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Connector Type(s)||PCI Express x4|
|2 - External Ports||RJ-45|
|Environmental||Operating Temperature||5°C to 50°C (41°F to 122°F)|
|Storage Temperature||-20°C to 60°C (-4°F to 140°F)|
|Humidity||20% ~ 80% RH|
|Interface||RJ45 (10 Gigabit Ethernet)|
|Bus Type||PCI Express|
|Card Type||Standard Profile (LP bracket incl.)|
|Industry Standards||IEEE 802.3an (10GBASE-T)
IEEE 802.3ab (1GBASE-T)
IEEE 802.3u (100BASE-T)
IEEE 802.3az (Energy Efficient Ethernet) PCI Express Rev 3.0
|Chipset ID||Intel - X550AT|
|Indicators||2 - LED Indicators||Link Speed|
|Packaging Information||Shipping (Package) Weight||199,0 g [7,0 oz]|
|Package Length||28,6 cm [11,3 in]|
|Package Width||22,1 cm [8,7 in]|
|Package Height||11,6 cm [4,6 in]|
|Performance||Maximum Data Transfer Rate||10 Gbps|
|Compatible Networks||10 Gbps/5G/2.5G/1G/100 Mbps|
|Full Duplex Support||Yes|
|Jumbo Frame Support||9K max.|
|Supported Protocols||IEEE 802.3X (Flow Control Support) IEEE 802.1q (VLAN tagging)|
|Product Length||22,8 cm [9,0 in]|
|Product Width||15,0 mm [0,6 in]|
|Product Height||13,2 cm [5,2 in]|
|Weight of Product||98,0 g [3,5 oz]|
|Software||OS Compatibility||Windows® 7, 8, 8.1, 10
Windows Server® 2008 R2, 2012, 2012 R2, 2016, 2019
(Windows Drivers are supported in 64-bit only)
Linux 3.x to 4.11 LTS Versions only
|Special Notes / Requirements||System and Cable Requirements||Available PCI Express x4 slot|
|For Windows, NBase-T support requires Windows 8 or higher|
|What's in the Box||1 - Included in Package||network card|
Make 10Gb Ethernet connections with PoE support
Make 10Gb Ethernet connections with PoE support
Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the driver:
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.
Sometimes an on-board network interface card (NIC) conflicts with a new NIC. In these cases it is best to disable the on-board NIC.
The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible. To do this, consult your motherboard manual.
You can also disable any NIC in Windows. Here is how you do this:
First click Start, or, in Windows 10 and 8, hold down the Windows key and press X. Then click Control Panel.
If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings. You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.
Note: You must log in as the local administrator before you continue.
To open Device Manager:
To confirm that Windows detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.