Product ID: ST122PRO
In stock: US: 0 | CA: 12
The ST122PRO 2 Port High Resolution VGA Video Splitter - 350 MHz splits a VGA video source signal to 2 monitors or projectors simultaneously - a professional grade solution that is perfect for presentations, classrooms, tradeshows, or in-store displays, where the highest quality video on several monitors is needed.
This High Resolution VGA Splitter supports monitors with up to 350MHz of video bandwidth and display resolutions up to 2048x1536 @80Hz. For added versatility, the VGA splitter features an integrated booster circuit that allows the video signal to be extended up to 210 feet (65 meters), enabling you to situate your displays in the most convenient location based on your application.
This product is TAA compliant and backed by a Startech.com 2-year warranty with free lifetime technical support. Male to Female VGA extension cable required (MXT101HQ)
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(s) | 1 - Connector Type(s) | VGA (15 pin, High Density D-Sub) |
2 - Connector Type(s) | VGA (15 pin, High Density D-Sub) | |
Environmental | Operating Temperature | 0 to 40 °C |
Storage Temperature | 5 to 40 °C | |
Humidity | 0~80% RH Non-condensing | |
Hardware | Ports | 2 |
Audio | No | |
Regulatory Approvals | FCC Part 15 Class A, CE Mark | |
Industry Standards | DDC compatible - all other monitors must be able to support the highest video resolution of the DDC-type monitor connected to Video Out 1 | |
Packaging Information | Package Height | 3.7 in [93 mm] |
Package Length | 9.4 in [24 cm] | |
Shipping (Package) Weight | 23.7 oz [670 g] | |
Package Width | 7.3 in [18.5 cm] | |
Performance | Maximum Cable Length | 213.2 ft [65 m] |
Maximum Analog Resolutions | 2048x1536 @ 80Hz | |
Bandwidth | (-3db): 350 MHz | |
MTBF | 1,588,136 Hours | |
General Specifications | Male to Female VGA extension cable required (MXT101HQ) | |
Physical Characteristics | Weight of Product | 12.9 oz [366 g] |
Color | Black | |
Material | Steel | |
Product Length | 7.1 in [18 cm] | |
Product Width | 3.1 in [80 mm] | |
Product Height | 0.8 in [21 mm] | |
Power | Power Source | AC Adapter Included |
Output Voltage | 5 DC | |
Output Current | 0.6A | |
Plug Type | N | |
Power Consumption (In Watts) | 3 | |
What's in the Box | 1 - Included in Package | 2 Port High Res. Video Splitter |
4 - Included in Package | Rubber feet | |
1 - Included in Package | Power Adapter | |
Instruction Manual |
Replace, or keep a spare 5V DC (2 A) KVM switch power adapter on hand
In stock: US: 22 | CA: 2
Connect your VGA monitor with the highest quality connection available
In stock: US: 2376 | CA: 625
Connect your VGA monitor with the highest quality connection available
In stock: US: 923 | CA: 280
Connect your VGA monitor with the highest quality connection available
In stock: US: 1292 | CA: 192
Extend your VGA monitor connections by 6ft
In stock: US: 1631 | CA: 157
Extend your VGA monitor connections by 10ft
In stock: US: 1112 | CA: 73
Extend your VGA monitor connection without losing video signal quality
In stock: US: 447 | CA: 66
Extend and distribute a VGA signal to 2 local, and 2 remote displays over Cat5 or better cabling
In stock: US: 0 | CA: 10
We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)When you troubleshoot issues with a video splitter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video cables
Video splitter
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI splitter, you should use an HDMI source when you test the components.
To test your setup components, try the following:
Use the cable, video splitter, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video splitter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video splitter from your setup and test to make sure that the video source and video destination work together without the video splitter.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, splitter, and destination all need to support the resolution that you are using.
Video splitters take the output for monitor port 1 and mirror it to the remaining outputs. By default, the first output port is the master port that is mirrored to each additional monitor. Make sure that you use the first output port when you use the video splitter. The master port is labeled on the splitter boxes from StarTech.com. On the splitter cables from StarTech.com, the master port is the top port.
If you are having issues with a splitter interpreting the incorrect port as the master port, try the following:
Unplug all of the video connections.
If the splitter is powered, power cycle the splitter.
Plug in all of the video connections again.
Make sure that the first video connection plugged in is the one that you want to be the master port.
You might encounter resolution issues when you use a video splitter. This can occur because the information and resolution on one display are being copied and sent to each of the additional displays. You should make sure that all of the displays that you are using can support the output resolution. For more information, refer to the following FAQ: https://www.startech.com/faq/video_splitters_correct_port_usage
This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
Target connection | First conversion | Second conversion (if required) |
DVI-D | VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. | HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
DVI-I | VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. | N/A |
HDMI |
VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
N/A |
DisplayPort | VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. | HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort. |
Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.
When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.
Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.
This device has a VGA input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
Source connection |
Conversion |
DVI-I |
DVI-I to VGA: https://www.startech.com/DVIVGAMFBK. |
DVI-D |
DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA. |
HDMI |
HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA. |
DisplayPort |
DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/. |
When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals. Some DVI-I connections only support DVI-D signaling. In this case, you must use a DVI-D to VGA converter.
Check out our review guidelines.