Product ID: HD15CPNTMM3
In stock: US: 184 | CA: 25
The HD15CPNTMM3 3ft HD15 to Component RCA Breakout Cable Adapter features a male VGA (HD15) connector and male component video connectors, allowing you to connect a VGA output (video card, etc.) to a display/monitor that uses Component video input.
Constructed of only top quality materials and expertly designed for reliable performance, the HD15 to Component RCA breakout cable adapter is backed by StarTech.com's Lifetime Warranty.
NOTE: This cable requires a video converter or output device that can process a YPbPr signal through an HD15 (VGA) port.
|Connector(s)||Connector A||1 - VGA (15 pin, High Density D-Sub)|
|Connector B||1 - Component Video (3 x RCA)|
|Packaging Information||Package Height||0.9 in [24 mm]|
|Package Length||8.7 in [22 cm]|
|Shipping (Package) Weight||0.2 lb [0.1 kg]|
|Package Width||7.9 in [20 cm]|
|Physical Characteristics||Product Height||0.0 in [0 cm]|
|Weight of Product||3.3 oz [93 g]|
|Product Width||0.0 in [0 mm]|
|Cable Length||36.0 in [914.4 mm]|
|Product Length||36.0 in [91.4 cm]|
|What's in the Box||Included in Package||1 - 3 ft HD15 to Component RCA Breakout Cable Adapter - M/M|
When you troubleshoot issues with a legacy video cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting an S-Video source to composite for use with a composite TV, you should use a composite source when you test the composite cables.
To test your setup components, try the following:
Use the video cable, source, and destination in another setup to see if the problem is with the components or the setup.
Use a different video cable, source, and destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.