Product ID: LP4SATAFM6IN
In stock: US: 0 | CA: 297
The LP4SATAFM6IN SATA to LP4 Power Cable Adapter features an LP4 female power connector and a male SATA power connector, allowing you to connect an IDE hard drive to a Serial ATA power connector provided by the computer power supply.
|Connector(s)||1 - Connector A||SATA Power (15 pin)|
|1 - Connector B||LP4 (4 pin; Large Drive Power)|
|Environmental||Operating Temperature||20°C to 80°C (68°F to 176°F)|
|Storage Temperature||24°C to 25°C (75.2°F to 77°F)|
|Hardware||Cable Jacket Material||PVC - Polyvinyl Chloride|
|Packaging Information||Package Height||0.4 in [9.0 mm]|
|Package Length||4.9 in [12.5 cm]|
|Shipping (Package) Weight||0.6 oz [17.0 g]|
|Package Width||3.5 in [90.0 mm]|
|Physical Characteristics||Product Height||0.3 in [7 mm]|
|Weight of Product||0.5 oz [13.0 g]|
|Product Width||1.2 in [31.5 mm]|
|Wire Gauge||18 AWG|
|Cable Length||6.0 in [15.2 cm]|
|Product Length||5.9 in [15.0 cm]|
|What's in the Box||1 - Included in Package||6in SATA to LP4 Power Cable Adapter - F/M|
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.