Product ID: MPO8LCPL2M
In stock: US: 44 | CA: 3
This MPO/MTP to 8x LC breakout cable lets you fan out a single 40Gbps connection from a 40GBase-SR4 QSFP+ transceiver to four 10Gbps LC SFP+ transceivers.
The push-and-pull tabs optimize accessibility and let you install or remove the connectors with one hand, without using additional tools. Plus, the slim uniboot design of the LC connectors saves space and improves cable management.
The MPO cable is housed in a plenum-rated jacket and is ideal for installations where CMP fire rating is required.
Each OM3 fiber cable has been individually tested for insertion loss and return loss. The full test report is included in each cable bag.
The MPO8LCPL2M from StarTech.com is backed by a lifetime warranty.
|Connector(s)||1 - Connector A||MPO/MTP|
|8 - Connector B||Fiber Optic LC Duplex|
|Environmental||Operating Temperature||-10°C to 70°C (14°F to 158°F)|
|Storage Temperature||-10°C to 70°C (14°F to 158°F)|
|Humidity||55 ～ 65%RH|
|Hardware||Fire Rating||CMP Rated (Plenum)|
|Packaging Information||Shipping (Package) Weight||1.9 oz [54 g]|
|Package Length||8.7 in [22 cm]|
|Package Width||7.9 in [20 cm]|
|Package Height||0.4 in [10 mm]|
|Cable Length||6.6 ft [2 m]|
|Product Length||6.6 ft [2 m]|
|Product Width||0.5 in [13 mm]|
|Product Height||0.3 in [8 mm]|
|Weight of Product||1.6 oz [44 g]|
|What's in the Box||1 - Included in Package||fiber optic cable|
UPC and APC are fiber connector types. UPC (Ultra Physical Contact) connectors have a fiber connector end face that has been polished to a dome-shape. APC (Angled Physical Contact) connectors have a fiber connector end face that has been polished at an eight degree angle. When building fiber solutions, be sure to avoid mixing UPC and APC connectors. UPC and APC cannot mate with one another because causes the fiber cores don’t touch. This can cause a degraded connection or none at all.
StarTech.com fiber products use UPC connectors.