Product ID: PYO2LP4LSATR
In stock: US: 1104 | CA: 69
The PYO2LP4LSATR LP4 to Dual Latching Right-Angle SATA power splitter cable features two Serial ATA female power connectors and one LP4 male connector - a reliable solution that enables you to power two SATA drives using a single LP4 connection to the computer power supply.
This durable LP4 to SATA Y cable adapter is 12 inches in length, giving you enough cable slack to position drives as needed within the computer case, while saving the cost and hassle of upgrading a power supply for compatibility with Serial ATA drives.
Expertly designed and constructed of top quality materials, the 4-pin LP4 to SATA Splitter Power cable is backed by StarTech.com's Lifetime Warranty.
|Connector(s)||1 - Connector A||LP4 (4 pin; Large Drive Power)|
|2 - Connector B||SATA Power (15 pin)|
|Packaging Information||Package Height||0.9 in [23 mm]|
|Package Length||8.9 in [22.5 cm]|
|Shipping (Package) Weight||1.4 oz [40 g]|
|Package Width||4.9 in [12.5 cm]|
|Physical Characteristics||Weight of Product||1.2 oz [35 g]|
|Connector Style||Right Angled|
|Wire Gauge||18 AWG|
|Cable Length||12.0 in [304.8 mm]|
|Product Length||12.0 in [304.8 mm]|
|What's in the Box||1 - Included in Package||12in LP4 to 2x Right Angle Latching SATA Power Y Cable Adapter|
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.