Product ID: PYOLP42SATA
In stock: US: 84 | CA: 35
This SATA power splitter cable also features an extra LP4 power connector.
The SATA power splitter connects to a single SATA power supply connection and breaks out into two SATA female power connectors and one LP4 connector - adding one LP4 and one SATA power connection, without having to upgrade the PSU or limit the number of installed drives based on power connection availability.
|Connector(s)||1 - Connector A||SATA Power (15 pin)|
|2 - Connector B||SATA Power (15 pin)|
|1 - Connector B||LP4 (4 pin; Large Drive Power)|
|Hardware||Cable Jacket Material||PVC - Polyvinyl Chloride|
|Packaging Information||Package Height||1.0 in [25.0 mm]|
|Package Length||4.9 in [12.5 cm]|
|Shipping (Package) Weight||1.1 oz [31.0 g]|
|Package Width||3.5 in [90.0 mm]|
|Physical Characteristics||Product Height||0.0 in [0.0 mm]|
|Weight of Product||1.0 oz [29.0 g]|
|Product Width||0.0 in [0.0 mm]|
|Cable Length||5.9 in [15 cm]|
|Product Length||5.9 in [15.0 cm]|
|What's in the Box||1 - Included in Package||SATA to LP4 with 2x SATA Power Splitter Cable|
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.