Product ID: PCI2S485LP
The PCI2S485LP 2 Port Low Profile RS-422/485 PCI Serial Card suits a broad range of environments, and is a perfect addition for connecting two-wire (with Auto Transceiver Turn Around feature, ATTATM) and four-wire configured serial devices to a host computer.
Compliant with PCI 2.2 standard specifications, the serial card offers a high performance 16C950 compliant UART and maximum data transfer rates of up to 115 Kbps.
This broadly compatible card can be installed in any available 3.3V or 5V PCI or PCI-X slot, and features a low profile mounting bracket that's suitable for installation in a small form factor case.
Backed by a StarTech.com Lifetime Warranty and free lifetime technical support.
|Connector(s)||1 - Connector Type(s)||PCI / PCI-X (Universal 3.3 & 5V, 32-bit)|
|2 - External Ports||DB-9 (9 pin, D-Sub)|
|Environmental||Operating Temperature||-10°C to 80°C (14°F to 176°F)|
|Storage Temperature||-20°C to 100°C (-4°F to 212°F)|
|Bus Type||PCI / PCI-X (5 / 3.3V)|
|Card Type||Low Profile|
|Port Style||Dongle (Included)|
|Chipset ID||ASIX - MCS9835CV|
|Packaging Information||Package Length||8.3 in [21 cm]|
|Package Width||1.6 in [40 mm]|
|Package Height||5.6 in [14.3 cm]|
|Shipping (Package) Weight||0.6 lb [0.3 kg]|
|Max Baud Rate||115.2 Kbps|
|Data Bits||5, 6, 7, 8, 9|
|Physical Characteristics||Product Length||4.7 in [12 cm]|
|Product Width||0.8 in [20 mm]|
|Weight of Product||4.9 oz [139 g]|
|Software||OS Compatibility||Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), XP Embedded, POS Ready 2009, Embedded System 2009, CE 5.0/6.0, 2000, 98SE, 95, DOS
Windows® Server 2012, 2008 R2, 2003(32/64)
Mac OS® 10.4 and up (Tested up to 10.9)
|What's in the Box||1 - Included in Package||Serial PCI Card|
|2 Port DB9 Break-out cable|
Connect your serial devices, and transfer your files
In stock: US: 2288 | CA: 1028
Transfer files via serial connection
In stock: US: 2363 | CA: 128
Convert an RS-422 or RS-485 DB 9 male serial connector to a terminal block connector
In stock: US: 277 | CA: 27
When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.
Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the serial ports and serial device, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Ports (COM & LPT).
Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.
Perform a serial loopback test. See this FAQ on how to perform a RS-232 serial loopback test: http://www.startech.com/faq/serial_loopback_test_rs232_windows
To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:
Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.
If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
For products related to this article, click here.