Product ID: SDOCK2U33HFB
The SDOCK2U33HFB USB 3.0 Dual hard drive dock with Fast Charge USB hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB, while controlling the power status (on/off) of each individual drive independently from the each other. The enclosure supports UASP and delivers optimal performance with a USB 3.0 connection, but is also backward compatible with USB 2.0/1.1 host connections.
The Hard Drive Dock features a built-in 2-port USB 3.0 Hub that enables you to connect additional USB 3.0 devices to your computer through the same USB connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad’s and other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets and smartphones.
With support for UASP, the dock performs up to 70% faster than conventional USB 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details.
With support for SATA I/II/III, large capacity drives (tested up to 4TB), and 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, and greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, and extends the life of your drives by avoiding unnecessary access.
The docking station features a built-in 80mm cooling fan that helps increase reliability and lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise.
Extend the value of this docking station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock.
To ensure compatibility with your computer system, the SDOCK2U33HFB supports all of the leading operating systems, including: Microsoft Windows® (8/7/Vista/XP/Server 2008/Server 2003), Apple® OSX (10.9/10.8/10.7/10.6), Linux, and Google Chrome OS™.
The SDOCK2U33HFB is backed by a 2-year StarTech.com warranty and free lifetime technical support.
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel® Ivy Bridge system, a UASP enabled StarTech.com Enclosure, and a SATA III solid state drive.
|Warranty Information||Warranty||2 Years|
|Connector(s)||Drive Connectors||2 - SATA Data & Power Combo (7+15 pin)|
|Host Connectors||1 - USB Type-B (9 pin) USB 3.0|
|Other Interface(s)||1 - USB Type-A (9 pin) USB 3.0 (5 Gbps)|
|1 - USB 3.0 A (Fast-Charge, 9 pin)|
|Environmental||Operating Temperature||5°C to 35°C (41°F to 95°F)|
|Storage Temperature||-20°C to 50°C (-4°F to 122°F)|
|Humidity||20%RH ~ 80%RH|
|Number of Drives||2|
|Drive Size||2.5in & 3.5in|
|Compatible Drive Types||SATA|
|Fans||1 - 80 mm|
|Chipset ID||VIA/VLI - VL812
ASMedia - ASM1053 - 6G
|Indicators||LED Indicators||1 - Power/Activity (Drive 1)|
|1 - Power/Activity (Drive 2)|
|Packaging Information||Package Height||5.1 in [130 mm]|
|Package Length||7.7 in [19.5 cm]|
|Package Width||6.3 in [16 cm]|
|Shipping (Package) Weight||3.3 lb [1.5 kg]|
|Performance||Type and Rate||USB 3.0 - 5 Gbit/s|
|Type and Rate||SATA III (6 Gbps)|
|Hardware Raid Supported||No|
|Max Drive Capacity||Currently tested with up to 4TB 5400 RPM 3.5" hard drives and 1TB 5400 RPM 2.5" hard drives|
|Physical Characteristics||Color||Black & Silver|
|Product Length||7.3 in [18.5 cm]|
|Product Width||4.8 in [122 mm]|
|Product Height||5.7 in [14.5 cm]|
|Weight of Product||29.1 oz [826 g]|
|Power||Power Source||AC Adapter Included|
|Input Voltage||100 - 240 AC|
|Output Voltage||12V DC|
|Center Tip Polarity||Positive|
|Power Consumption (In Watts)||72|
|Software||OS Compatibility||OS independent; No software or drivers required|
|Microsoft WHQL Certified||Yes|
|Special Notes / Requirements||Note||Note: Certain devices may not support charging and syncing simultaneously. In these instances disconnect the device, and set the charge only switch to “on”, then reconnect the device.|
|What's in the Box||Included in Package||1 - HDD Dock|
|1 - USB 3.0 Cable (1m)|
|3 - Universal power adapter: comes ready for NA/EU/UK only when you buy in NA/EU/UK; comes ready for Australia and New Zealand only when you buy in Australia and New Zealand|
|1 - Instruction Manual|
Add one internal and one external SuperSpeed USB 3.0 to your PC
In stock: US: 381 | CA: 91
In stock: US: 592 | CA: 0
Add 4 external USB 3.0 ports to a low profile or standard computer, through PCI Express
In stock: US: 511 | CA: 0
Add two USB 3.0 ports through a Mini PCI Express slot
In stock: US: 62 | CA: 15
Use your 2.5in or 3.5in IDE hard drives in a SATA HDD Docking Station
In stock: US: 1585 | CA: 24
Provides safe handling and anti-static protection for most 2.5in hard drives
In stock: US: 0 | CA: 22
Provide protection against shocks/impacts to a 3.5in hard drive
In stock: US: 60 | CA: 42
Connect to your external solutions and transfer data at 10x the speed of USB 2.0
In stock: US: 0 | CA: 38
Provide protection against shocks/impacts to a 2.5in hard drive
In stock: US: 187 | CA: 33
Connect to your external devices and transfer data at 10x the speed of USB 2.0
In stock: US: 4 | CA: 0
To determine if your hard drive will work in this device, on the product page, click the Technical Specifications tab, and do the following:
This docking station allows the hard drive to enforce its own power state, as opposed to enforcing a power state that keeps the hard drive active at all times. Since most newer hard drives have low-power energy conservation modes, this will cause the hard drive to enter an idle state if it is not used for a certain amount of time.
When you troubleshoot issues with a hard drive dock or duplicator, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
When you test the hard drive and hard drive dock or duplicator, it is recommended that you do the following:
Note: For a hard drive duplicator you may need to switch the device to PC mode (if available).
Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.
Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.
To confirm that the Mac OS detects your USB device, complete the following:
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.