Product ID: SFPG1580C
The SFPG1580C Cisco® Compatible Gigabit Fiber SFP Transceiver Module SM LC - 80 km (49.7 miles) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a Single-Mode LC port on your Gigabit fiber networking equipment or fiber media converter.
Supporting data rates up to 1.25 Gbps as well as Digital Diagnostics Monitoring (DDM), this LC SFP/Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port. Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot.
This 1310nm single-mode SFP module is compatible with the Cisco SFP-GE-Z transceiver.
Backed by a StarTech.com lifetime warranty and free lifetime technical support.
|System and Cable Requirements||MSA or Cisco compliant SFP port|
|Connector(s)||1 - Local Unit Connectors||Fiber Optic LC Duplex|
|Environmental||Operating Temperature||0°C to 70°C (32°F to 158°F)|
|Storage Temperature||-40°C to 85°C (-40°F to 85°F)|
|Industry Standards||IEEE 802.3z 1000BASE-ZX|
|Packaging Information||Package Length||4.5 in [11.5 cm]|
|Package Width||3.5 in [90.0 mm]|
|Package Height||1.2 in [30.0 mm]|
|Shipping (Package) Weight||0.1 lb [0.0 kg]|
|Performance||Maximum Data Transfer Rate||1.25 Gbps|
|Max Transfer Distance||80 km (49.7 mi)|
|Fiber Operating Mode||Half/Full-Duplex|
|Compatible Networks||1000 Mbps (1 Gbps)|
|Physical Characteristics||Product Length||2.4 in [60.0 mm]|
|Product Width||0.5 in [12.0 mm]|
|Product Height||0.4 in [1.0 cm]|
|Weight of Product||0.6 oz [17.0 g]|
|Special Notes / Requirements||Note||For use in Gigabit fiber networking equipment and media converters|
|What's in the Box||1 - Included in Package||1.25 Gbps Single Mode LC SFP|
Connect fiber network devices for high-speed transfers with LSZH rated cable
In stock: US: 287 | CA: 51
SFP fiber transceivers (mini-GBIC) are specific to applications and therefore, you need to select the correct fiber transceiver for your application. StarTech.com offers a few types of fiber transceivers: Cisco®, Cisco Meraki®, HP®, and Juniper® compatible, as well as standard gigabit SFP converters. Although the transceivers may be referred to as GBIC or mini-GBIC, the correct terminology for the device is small form-factor pluggable transceiver or SFP . StarTech.com does not carry GBIC converters.
If your device is not a Cisco device, it can still use Cisco compatible SFPs. Cisco SFPs are specifically coded to be compatible with Cisco devices. A standard SFP will not work in a Cisco device.
StarTech.com offers two different output connector types for SFPs: RJ-45 and fiber.
No special requirements are necessary to use RJ-45 SFPs. However, if you use fiber transceivers, the following items need to be the same as the interconnecting equipment:
The connector type, such as LC, SC, or ST.
The mode (single mode or multi mode).
The wavelength, such as 850 nm, 1310 nm, or 1550 nm.
The DDM support.
The speed, such as 10Gbps.
Note: The properties listed above cannot be converted or changed by a cable, excluding the connector type.