Product ID: USB4000IP
This USB network hub lets you share four USB peripheral devices over an IP network for access from multiple computers.
A simple and cost-effective resource sharing solution, the hub eliminates the need to purchase duplicate peripherals for each computer, by letting you reach USB devices from anywhere on your LAN, overcoming traditional USB cable connection distances.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - External Ports||RJ-45|
|4 - External Ports||USB Type-A (4 pin) USB 2.0|
|Environmental||Operating Temperature||0°C to 70°C (32°F to 158°F)|
|Storage Temperature||-40°C to 85°C (-40°F to 185°F)|
|Packaging Information||Package Length||8.4 in [21.4 cm]|
|Package Width||1.7 in [42 mm]|
|Package Height||5.7 in [14.5 cm]|
|Shipping (Package) Weight||0.8 lb [0.4 kg]|
|Performance||Maximum Data Transfer Rate||Supports 10/100 Mbps networks|
|Product Length||3.9 in [10 cm]|
|Product Width||2.4 in [60 mm]|
|Product Height||0.8 in [2 cm]|
|Weight of Product||10.0 oz [284 g]|
|Power||Power Source||AC Adapter Included|
|Output Voltage||5 DC|
|Center Tip Polarity||Positive|
|Software||OS Compatibility||Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64)
Windows® Server 2008 R2
|What's in the Box||1 - Included in Package||4 Port USB Device Server|
Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the USB Server software:
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.
Confirm that the extender is on the same network as your computer. If you are using a network with DHCP, you do not need to configure anything further.
If you are using an Ethernet cable to connect to the unit or you are using a network without DHCP, you need to change the IP address on your computer to the default IP network of the IP device server. Change the IP address of your system to 192.168.1.XXX, where XXX is a number between 1 and 49.
Note: The default IP address of the extender is 192.168.1.50 on the default subnet mask of 255.255.255.0.
Your extender is detected by the USB Server software when the software is launched.
Note: It may take a few minutes for the server to appear in the software.
When the extender appears in the list (for example, USB2HDMI), click either the display or media device associated with the server. Click on one of the devices and then click Connect Device.
When the USB Server software configuration is complete, the display and media devices are connected to your system as though the devices are installed locally. By default, Windows creates an extended desktop for the display, which you can reconfigure in the control panel.
If the device is not detected in the USB Server software, complete the following: