Product ID: SV211K
This 2 Port KVM Switch Kit lets you control two computers using a single keyboard, mouse and VGA monitor and offers both hotkey and top panel push-button operation for simple switching between connected computers.
Designed to integrate seamlessly into any environment, the KVM switch offers a small footprint design (roughly the size of a deck of playing cards) and draws power from the connected computers, so it doesn't require an external power supply.
A suitable solution for virtually any application, the KVM switch supports video resolutions of up to 2048 x 1536 and includes 3-in-1 (PS/2 and Video) cables to provide a complete, out-of-the-box KVM solution.
Delivering dependable and convenient control of multiple computers from a single peripheral station, this high quality KVM switch is backed by StarTech.com's 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Console Interface(s)||VGA (15 pin, High Density D-Sub)|
|2 - Console Interface(s)||PS/2 (6 pin, Mini-DIN)|
|2 - Host Connectors||VGA (15 pin, High Density D-Sub)|
|PC Video Type||VGA|
|Number of Monitors Supported||1|
|Packaging Information||Package Length||8.6 in [21.8 cm]|
|Package Width||3.9 in [10 cm]|
|Package Height||3.8 in [96 mm]|
|Shipping (Package) Weight||1.6 lb [0.7 kg]|
|Maximum Cable Length||6.0 ft [1.8 m]|
|Maximum Analog Resolutions||1920 x 1440|
|Auto Scan||3, 8, 15 & 30 seconds|
|Maximum Number of Users||1|
|Product Length||6.3 in [16 cm]|
|Product Width||2.8 in [70 mm]|
|Product Height||0.8 in [2.1 cm]|
|Power||Power Source||Not Included (not required for standard applications)|
|Software||OS Compatibility||OS independent; No software or drivers required|
|Special Notes / Requirements||Note||Optional Power Adapter requires 9V DC, 600 mA, center positive|
|What's in the Box||1 - Included in Package||2 Port PS/2 KVM Switch Kit with Cables|
|2 - Included in Package||Cables|
|4 - Included in Package||Rubber Feet|
Connect VGA video and a PS/2 keyboard and mouse set using a single thin KVM cable
In stock: US: 215 | CA: 18
Monitors may begin flickering when they receive a signal of insufficient quality. There are a few potential fixes available that will help to improve the signal quality in order to eliminate flickering:
There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds. Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.
You can test to make sure that the following components are working correctly and are not the source of the issue:
Video source (such as a DVR or computer)
Video destination (such as a monitor or projector)
Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.
To test your setup components, try the following:
Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.
There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch.
If the keys on your keyboard are repeating, complete the following:
Note: When you move the keyboard out of the keyboard port, you will not be able to access the hotkeys.
Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use. Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues. This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards. We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.
If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.