Composite Video Extender over Cat 5 with Audio
Extend a Composite video signal with supporting audio up to 200 meters (650 feet) using Cat 5 cabling
Product ID: COMPUTPEXTA
- Works with shielded twisted pair (STP) and unshielded twisted pair (UTP) Cat5 cable
- Mounting kit included for wall installation
- Quick, easy installation and setup
The COMPUTPEXTA Composite Video Extender over Cat 5 with Audio lets you extend a composite video source signal up to 200 meters (650 feet), using standard Cat 5 UTP cabling.
The composite over cat 5 extender is comprised of two extender units that can be used interchangeably - one is installed near the video signal source, the other to be placed near the desired display, up to an impressive 200m away. With no software or power adapter requirements, installation and setup is quick and hassle-free. The included installation/mounting kit, and BNC to RCA composite video adapters offer added flexibility in the placement and usage of the device.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Requires no software or power adapter, for a simple and hassle-free setup
- The included wall mounting kit provides flexibility in the placement of the transmitter and receiver units
- Cat5 extension design allows you to make use of existing Cat 5 or better wiring infrastructure
Ideal for classrooms, projectors, tradeshows, and retail displays
To be used in home or commercial applications as a fast, and cost-effective means of connecting composite video equipment over long distances
|Ingram Micro Belgium||1592438|
|Ingram Micro España||V930526|
|Ingram Micro Italy||V930526|
|Ingram Micro Netherlands||1592438|
|Ingram Micro Sweden||V930526|
|Tech Data - Belgium||4571526|
|Tech Data - Italy||4571526|
|Tech Data - Netherlands||4571526|
|Cabling||Cat 5 UTP or better|
|Max Distance||200 m / 660 ft|
|Supported Resolutions||480i, 480p|
|Local Unit Connectors||1 - BNC (RF Coax) Female|
|1 - Composite Video (1 x RCA) Female|
|1 - RJ-45 Female|
|1 - Stereo Audio (2 x RCA) Female|
|Remote Unit Connectors||1 - BNC (RF Coax) Female|
|1 - Composite Video (1 x RCA) Female|
|1 - RJ-45 Female|
|1 - Stereo Audio (2 x RCA) Female|
|Special Notes / Requirements|
|Note||Includes 2 x BNC to RCA composite adapters|
|Product Height||24 mm [0.9 in]|
|Product Length||110 mm [4.3 in]|
|Product Weight||335 g [11.8 oz]|
|Product Width||7.7 cm [3 in]|
|Shipping (Package) Weight||421 g [14.9 oz]|
|What's in the Box|
|Included in Package||1 - Composite Video and Audio Extender Kit|
|1 - Mounting Kit|
|2 - BNC to RCA adapter|
|1 - Instruction Manual|
Make Fast Ethernet network connections using this high quality Cat5e Cable, with Power-over-Ethernet capability
14+ In stock
Connect your Computer or Audio Player to an RCA Audio Device
681+ In stock
Connect your computer or audio player to an RCA audio device
737+ In stock
Frequently Asked Questions
Before You Buy
You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.
The following table lists the maximum length of cable for common video standards.
|Video standard||Maximum length|
|DisplayPort||50 ft. (15.2m)|
|HDMI||50 ft. (15.2m)|
|DVI||50 ft. (15.2m)|
|VGA||200 ft. (71m)|
Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).
Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.
Examples of common applications for adapters include the following:
DVI-I to VGA
RCA to BNC
Mini DisplayPort to DisplayPort
Couplers (female to female, or male to male)
Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.
Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).
Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.
Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.
Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.
If you need to use a video extender with a video adapter or converter, you should position the adapter or converter as close to the video source as possible. For example, if you need to take a VGA signal from a computer and send it 200 feet to an HDMI® projector, you should convert the signal from VGA to HDMI and use an HDMI extender.
Note: For more information on when to use cables or extenders, see the following FAQ: http://www.startech.com/faq/video_signal_converters_when_to_convert.
No, this device is designed to be a point-to-point solution using networking cabling only.
There are a few things you'll want to take care of before you deploy your new video extender in your setup.
It’s important to make sure you have everything you will need ahead of time. These items are listed below.
- Video source
- Video cables
- (Optional) Ethernet or fiber cables
- (Optional) Power adapter(s)
It’s also important to test everything in a simplified setup ahead of time to make sure everything works and that you understand how it works.
In order to set up your video extender, complete the following:
- Position your video transmitter near your video source.
- Connect the video output from your video source to the video transmitter.
- (Optional) Connect the power adapter to the video transmitter.
Note: Not all video extenders require external power, or require external power on both ends. Refer to the manual for more information.
- Position your video receiver near your display.
- Connect the video output from your video receiver to your display.
- (Optional) Connect the power adapter to the video receiver.
- If using a wired video extender, connect your network cabling between the video transmitter and the video receiver.
- (Optional) If you are extending anything else supported by your video extender connect those devices to the transmitter and receiver.
- (Optional) If you are using a wireless extender, there may be a sync button you need to press to pair the transmitter and receiver.
Now that you have set up your video extender, you can check that everything is working. You should be able to see your video source's output on the display connected to the video receiver.
If at this point you have further questions regarding a Startech.com video extender, contact our technical support team for further assistance.
When you troubleshoot issues with a video extender, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video and Ethernet cables
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.
To test your setup components, try the following:
Use the cable, video extender, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video extender, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video extender from your setup and test to make sure that the video source and video destination work together without the video extender.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.