6in DVI-D Dual Link Digital Port Saver Extension Cable M/F
Extend a DVI-D port by 6in, to prevent unnecessary strain on the port
Product ID: DVIDEXTAA6IN
The DVIDEXTAA6IN 6-inch DVI-D Port Saver Cable/coupler avoids expensive repairs to a computer or display. It does this by extending the port by 6in, thereby eliminating the weight and stress that would typically be placed on the port by a DVI cable. This is especially useful in an environment where cables are unplugged and re-inserted frequently.
The 6in DVI-D cable supports resolutions of up to 2560x1600 and transmission rates of up to 9.9 Gbits/sec, and is fully compliant with DVI DDWG standards.
Designed and constructed for maximum durability, this high quality video cable is backed by StarTech.com's Lifetime Warranty.
The StarTech.com Advantage
- Prevents repairs to your computer or display by extending the port to eliminate the stress that would be placed on the port by a DVI-D cable
- Guaranteed reliability
Extend a video card or monitor DVI-D port by 6in, to protect against damage from frequent connect/disconnects
|Ingram Micro Belgium||1861100|
|Ingram Micro España||V931746|
|Ingram Micro Italy||V931746|
|Ingram Micro Netherlands||1861100|
|ALSO DEUTSCHLAND GMBH||2772917|
|Ingram Micro France||V931746|
|Ingram Micro Sweden||V931746|
|Tech Data - France||4782994|
|Tech Data - Italy||4782994|
|Cable Jacket Type||PVC - Polyvinyl Chloride|
|Cable Shield Type||Aluminum-Mylar Foil with Braid|
|Connector A||1 - DVI-D (25 pin) Male|
|Connector B||1 - DVI-D (25 pin) Female|
|Cable Length||0.2 m [0.5 ft]|
|Product Height||16 mm [0.6 in]|
|Product Length||152.4 mm [6 in]|
|Product Weight||79 g [2.8 oz]|
|Product Width||40 mm [1.6 in]|
|Wire Gauge||28 AWG|
|Shipping (Package) Weight||84 g [3 oz]|
|What's in the Box|
|Included in Package||1 - 6in DVI-D Dual Link Digital Port Saver Cable M/F|
Frequently Asked Questions
Before You Buy
Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types:
- DVI-A (17 pin).
- DVI-D Single Link (19 pin).
- DVI-D Dual Link (25 pin).
- DVI-I Single Link (23 pin).
- DVI-I Dual Link (29 pin).
Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).
Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.
DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.
When you troubleshoot issues with a DVI cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the DVI cable, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different DVI cable, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the video cables, video source, and video destination, it is recommended that you do the following:
Make sure that you are using the correct type of DVI cable. For more information about DVI cables, see the following FAQ: http://www.startech.com/faq/video_signal_converters_dvi_interface.
Verify that the source resolution matches the video source destination capabilities. For example, if the destination or DVI cable is only capable of 1920 x 1080, then the source cannot output 2560 x 1600, as that exceeds the capabilities of the destination or DVI cable.
Test your setup components using a lower resolution or a lower refresh rate, for example, 1024 x 768.
Note: Single Link DVI cables are only capable of resolutions up to 1920 x 1080. In order to obtain a resolution of 2560 x 1600, you will need to use a Dual Link DVI cable. For more information, see the FAQ link listed above.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.