2 Port SATA to eSATA Slot Plate Bracket
Turn two standard SATA motherboard connections into two external eSATA ports
Product ID: ESATAPLATE2
StarTech.com's eSATA SATA adapter plate adds external data support to any existing Serial ATA controller, adding two eSATA ports for connection to external SATA devices.
The adapter plate can be mounted to the rear panel of the computer case, providing straightforward eSATA to SATA connections and allowing users to connect their eSATA device (hard drive enclosure, etc.) to the provided eSATA port which is an extension of the motherboard SATA data connector.
Designed to take advantage of the increased data integrity provided by external hard drives or RAID devices that support eSATA connections, the eSATA SATA adapter supports data transfer rates of up to 6Gbps and is backed by StarTech.com's Lifetime Warranty.
The StarTech.com Advantage
- Connects to two internal SATA ports and adds two eSATA ports allowing connectivity to external SATA devices
- Easy to use and install
- Backed by StarTech.com's lifetime warranty
Ingram Micro Belgium
Ingram Micro España
Ingram Micro Italy
Ingram Micro Netherlands
ALSO DEUTSCHLAND GMBH
Ingram Micro France
Ingram Micro Sweden
Tech Data - Belgium
Tech Data - France
Tech Data - Italy
Tech Data - Netherlands
|Connector Type(s)||2 - eSATA (7 pin, Data) Plug|
|2 - SATA (7 pin, Data) Receptacle|
|Humidity||0 to 95% at 25°C(77°F)|
|Operating Temperature||0°C to 50°C (32°F to 122°F)|
|Storage Temperature||-20°C to 70°C (-4°F to 158°F)|
|Product Length||0.3 m [1 ft]|
|Weight of Product||53 g [1.9 oz]|
|Package Height||20 cm [7.9 in]|
|Package Length||22 cm [8.7 in]|
|Package Width||20 mm [0.8 in]|
|Shipping (Package) Weight||60 g [2.1 oz]|
|What's in the Box|
|Included in Package||1 - 2 Port SATA to eSATA Slot Plate Bracket|
Frequently Asked Questions
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.