StarTech.com
Discontinued

4 Bay eSATA USB 3.0 to SATA Hard Drive Docking Station for 2.5/3.5 HDD

Enable quick access to four 2.5"/3.5" SATA HDD over USB 3.0 or eSATA

Product ID: SATDOCK4U3E

  • Accepts up to 4 SATA hard drives simultaneously, in a single docking station
  • Dual 60mm cooling fans mounted below the drives with variable speed controls (including OFF)
  • Supports both 2.5" and 3.5" form factor hard drives (HDD) and solid state drives (SSD)
View More
  • SuperSpeed USB 3.0 compliant host interface with support for transfer rates up to 5 Gbps
  • Backward compatible with USB 2.0 systems, out of the box
  • High speed eSATA with Port Multiplier host interface with supported transfer rates up to 3 Gbps
  • Patented hard drive eject push-buttons for each drive
  • Independent power buttons for each hard drive
  • Extra, easy-access spacing between each drive
  • Four large, stable, non-slip table-top feet
  • Plug-and-Play and Hot-Swap compatible
  • Compatible with SATA revision 1/2/3 drives
0,00 € EUR
VAT not included in the price
In stock with partners:
Where To Buy

Overview

The SATDOCK4U3E eSATA and USB 3.0 4-Bay SATA Hard Drive Docking Station is a convenient, time-saving storage solution for 2.5-inch and 3.5-inch SATA hard drives (HDD) and solid state drives (SSD) allowing for up to 4 SATA drives (tested with up to 4TB 3.5" and 1TB 2.5" drives per bay) to be conveniently and quickly connected to a host computer through a single connection.

The hard drive docking station features SuperSpeed USB 3.0 connectivity (also compatible with USB 2.0) with support for data transfer rates up to 5Gbps (10x faster than USB 2.0) or eSATA with Port Multiplier connectivity (up to 3Gbps), to provide fast connectivity to all 4 hard drives simultaneously.

The eSATA/USB 3.0 SATA hard drive docking station also features dual built-in, variable-speed 60mm fans that can be manually adjusted to keep each drive running cool, depending on the drives and operating environment, or turned off completely. Double the value of this hard drive docking station, using a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.

The StarTech.com Advantage

  • Access up to 4 SATA drives simultaneously over a single USB 2.0/3.0 or eSATA connection
  • Independent power buttons and eject mechanism for each SATA hard drive allows for quick and easy hot-swapping
  • Dual, variable speed fans allows you to adjust the amount of cooling for any kind of environment or drives

Applications

IT professionals who need to hot-swap between multiple SATA drives regularly

System builders who need to quickly image or copy data to multiple drives simultaneously

Technicians who need to access up to 4 different drives from a single station

Users who want to access multiple external drives but with a limited number of USB/eSATA ports

Technical Specifications

Warranty Information
Warranty 2 Years
Hardware
Chipset ID JMicron - JM321
JMicron - JM539
Compatible Drive Types SATA
Drive Size 2.5in & 3.5in
Fan(s) Yes
Fans 2 - 60 mm
Interface USB 3.0 & eSATA
Number of Drives 4
Performance
Insertion Rating 15, 000 cycles
Max Drive Capacity Currently tested with up to 4TB 5400 RPM 3.5" hard drives per bay (16TB total) and 1TB 5400 RPM 2.5" hard drives (4TB total)
Type and Rate USB 3.0 - 5 Gbit/s
SATA II (3 Gbps)
UASP Support No
Connector(s)
Drive Connectors 4 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors 1 - eSATA (7 pin, Data) Plug
1 - USB Type-B (9 pin) USB 3.0 Female
Software
OS Compatibility OS independent; No software or drivers required
Special Notes / Requirements
Note eSATA connections require the host computer to support Port Multiplier technology, otherwise only one of the hard drives will be detected.
System and Cable Requirements Available USB 2.0 or 3.0 port or eSATA port
Indicators
LED Indicators 4 - Activity (Red)
4 - Power (Blue)
Power
Center Tip Polarity Positive
Input Current 2.5
Input Voltage 110V-240V AC
Output Current 6.5A
Output Voltage 12 DC
Plug Type 4-pin DIN
Power Source AC Adapter Included
Environmental
Humidity 8% ~ 90% RH
Operating Temperature 5°C to 80°C (41°F to 176°F)
Storage Temperature -40°C to 70°C (-40°F to 158°F)
Physical Characteristics
Color Black
Enclosure Type Plastic
Product Height 94.7 mm [3.7 in]
Product Length 290.5 mm [11.4 in]
Product Weight 966 g [34.1 oz]
Product Width 172.7 mm [6.8 in]
Packaging Information
Shipping (Package) Weight 1.6 kg [3.5 lb]
What's in the Box
Included in Package 1 - 4-Bay HDD Docking Station
1 - eSATA cable
1 - USB 3.0 cable
1 - Universal power adapter: comes ready for NA/EU/UK only when you buy in NA/EU/UK; comes ready for Australia and New Zealand only when you buy in Australia and New Zealand
1 - Instruction Manual
Supports any operating system.
No additional drivers or software required.

Certifications

Related Products

USB 3.0 to SATA Hard Drive Docking Station for 2.5/3.5 HDD
SATDOCKU3S
USB 3.0 to SATA Hard Drive Docking Station for 2.5/3.5 HDD

Enable fast, swappable access to your 2.5in or 3.5in SATA hard drives, through USB 3.0

56,99 €
1028+ In stock
USB to IDE SATA Standalone HDD Hard Drive Duplicator Dock
UNIDUPDOCK
USB to IDE SATA Standalone HDD Hard Drive Duplicator Dock

Clone any combination of 2.5in or 3.5in IDE or SATA hard drives

263,99 €
6+ In stock

Accessories