6in LP4 to 6 Pin PCI Express Video Card Power Cable Adapter
Convert a Standard LP4 Power Supply Connector to a 6-pin PCI Express Video Card Power Connector
Product ID: LP4PCIEXADAP
This 6in LP4 to 6 Pin PCI Express Video Card Power Adapter converts a standard LP4 power connector on your existing power supply to a 6 pin PCI Express video card power connector, allowing you to install a PCIe graphics card without having to upgrade the computer power supply.
The StarTech.com Advantage
- Eliminates the need to purchase an expensive power supply with a 6 Pin power connector required by PCI-Express Video Cards
Converts standard 4 Pin LP4 power connector to a 6 Pin Power Connector
For use with PCI-Express Video Cards
|Connector A||2 - LP4 (4 pin, Molex Large Drive Power) Male|
|Connector B||1 - PCI Express Power (6 pin, v 1.x) Male|
|Special Notes / Requirements|
|System and Cable Requirements||Two 4-Pin LP4 connectors from your existing ATX Power Supply and a Video card that utilizes PCI-Express 6-Pin connector|
|Cable Length||6 in [152.4 mm]|
|Product Length||6 in [152.4 mm]|
|Product Weight||0.6 oz [18 g]|
|Shipping (Package) Weight||0.1 lb [0 kg]|
|What's in the Box|
|Included in Package||1 - 6in LP4 to 6 Pin PCI Express Video Card Power Cable Adapter|
Drivers & Downloads
Frequently Asked Questions
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.
* Product appearance and specifications are subject to change without notice.