SATA to LP4 with 2x SATA Power Splitter Cable

Add a SATA and LP4 power connection to a single SATA power supply connection

Product ID: PYOLP42SATA

SATA to LP4 with 2x SATA Power Splitter Cable

Gallery (5)

¥957 JPY exc tax

¥1,033 JPY inc tax

Where To Buy

Overview

This SATA power splitter cable also features an extra LP4 power connector.

The SATA power splitter connects to a single SATA power supply connection and breaks out into two SATA female power connectors and one LP4 connector - adding one LP4 and one SATA power connection, without having to upgrade the PSU or limit the number of installed drives based on power connection availability.

The StarTech.com Advantage

Break out a single SATA power supply connection into two SATA power connections and one LP4 power connection
Easy to use and install
Backed by StarTech.com's lifetime warranty

Applications

Inexpensive way to add power connectors to a power supply

Technical Specifications

Product Numbers

Synnex Infotec

ZU2016A

UPC Code

065030835480

Warranty Information
	Warranty	Lifetime
Hardware
	Cable Jacket Type	PVC - Polyvinyl Chloride
Connector(s)
	Connector A	1 - SATA Power (15 pin) Plug
	Connector B	1 - LP4 (4 pin; Molex-type Large Drive Power) Female
		2 - SATA Power (15 pin) Receptacle
Physical Characteristics
	Cable Length	5.9 in [150 mm]
	Product Length	5.9 in [150 mm]
	Product Weight	1 oz [29 g]
Packaging Information
	Shipping (Package) Weight	1.1 oz [31 g]
What's in the Box
	Included in Package	1 - SATA to LP4 with 2x SATA Power Splitter Cable

Certifications

Product Support

Data Sheets

PYOLP42SATA_Datasheet.pdf
- Language: English

Frequently Asked Questions

Troubleshooting

Everything is hooked up but nothing is working. What should I do?

When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

Power supply
Computer part
Power cable

To test your setup components, try the following:

Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cable, it is recommended that you do the following:

Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.

Copy Link

Was this information helpful? Yes No

Compliance and Safety

Compliance Letters

Country of Origin (COO)
- Language: English
Letter of Conformity (LOC)
- Language: English
Waste Electrical and Electronic Equipment Directive (WEEE)
- Language: English

Safety Measures

If product has an exposed circuit board, do not touch the product under power.
If Class 1 Laser Product. Laser radiation is present when the system is open.
Wiring terminations should not be made with the product and/or electric lines under power.
Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.