Are you in the United States?
Visit our U.S.A. & International site for relevant pricing, distribution and product availability information.
Go to StarTech.comUSB-C to Parallel Printer Cable
Add a parallel port through your laptop or desktop computer’s USB-C port, and connect to a DB25 parallel printer
Product ID: ICUSBCPLLD25
- Connect your USB-C enabled laptop or desktop computer to a DB25 printer
- Compatible with Windows®, Linux®, and macOS
- Turns an available USB-C port on your laptop or desktop computer into a DB25 Female parallel port
- Easy plug-and-play installation
Not Available
May be in stock with partners
From a Partner
Support
Overview
This USB-C™ to parallel printer cable allows you to connect your USB-C enabled laptop or desktop computer to a DB25 printer.
Cost-saving solution
A cost-effective and reliable solution, the USB to DB25 adapter saves you the expense of replacing a parallel printer for the sake of USB compatibility. It turns an available USB-C port on your laptop or desktop computer into a DB25 female parallel port, allowing you to connect a DB25 printer to your computer as if the necessary parallel port was built-in.
Easy installation and portability
The printer cable is supported by a broad range of operating systems, including Windows®, Linux®, and macOS, which makes it easy to integrate into mixed OS environments. It supports plug-and-play installation, saving you time and hassle.
The printer cable is USB powered, so there’s no need for an external power adapter.
The ICUSBCPLLD25 is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Applications
Enables you to quickly add a parallel port to your USB-C enabled laptop or computer, for use with printers with DB25 connectors
Ideal solution for notebooks or desktop computers lacking a parallel port
Technical Specifications
Product Numbers | ||
---|---|---|
Synnex Infotec | ZU201KB | |
UPC Code | 065030872010 |
Warranty Information | ||
---|---|---|
Warranty | 2 Years | |
Hardware | ||
Bus Type | USB-C | |
Chipset ID | Prolific - PL2305 | |
Interface | Parallel | |
Ports | 1 | |
Performance | ||
Maximum Data Transfer Rate | 1.5Mbps | |
Connector(s) | ||
Connector Type(s) | 1 - USB Type-C (24-pin) USB 2.0 Male | |
1 - DB25 (D-Sub 25 pin) Female | ||
Software | ||
OS Compatibility | Windows® 7, 8.1, 10 Windows Server® 2008 R2, 2012 R2, 2016 Mac OS X® 10.11 and 10.13 Linux 2.6.x to 4.4x LTS Versions only |
|
Special Notes / Requirements | ||
System and Cable Requirements | One available USB-C port | |
Power | ||
Power Source | USB-Powered | |
Environmental | ||
Humidity | 0~80% RH non-condensing | |
Operating Temperature | 5°C to 40°C (41°F to 140°F) | |
Storage Temperature | -20°C to 70°C (-4°F to 158°F) | |
Physical Characteristics | ||
Product Length | 72.6 in [1845 mm] | |
Product Weight | 3.2 oz [92 g] | |
Packaging Information | ||
Shipping (Package) Weight | 3.8 oz [108 g] | |
What's in the Box | ||
Included in Package | 1 - parallel printer adapter cable | |
1 - quick-start guide |
Compatibility









Windows Server® 2008 R2, 2012 R2, 2016
Mac OS X® 10.11 and 10.13
Linux 2.6.x to 4.4x LTS Versions only
Related Products
6 ft USB to DB25 Parallel Printer Adapter Cable - M/F
Add a DB25 parallel port to any PC or laptop with a free USB port
6 ft USB to Parallel Printer Adapter - M/M
Add a Centronics parallel port to your desktop or laptop PC through USB
10 ft USB to Parallel Printer Adapter - M/M
Add a Centronics parallel port to your desktop or laptop PC through USB
1 ft USB to RS232 Serial DB9 Adapter Cable with COM Retention
Add an RS-232 serial port to your laptop or desktop computer through USB; features COM port retention
Accessories
2-Port USB 3.1 (10Gbps) Card - 2x USB-C - PCIe
Upgrade your computer to the 10Gbps speed of USB 3.1 Gen 2, by adding two USB Type-C ports
Dual-Port USB-C Card - 10Gbps per port - 2x USB-C - USB 3.1 - PCIe
Add two 10Gbps USB Type-C ports to your computer, through a PCI Express slot
2-Port USB 3.1 (10Gbps) Card - 1x USB-C, 1x USB-A - PCIe
Upgrade your computer to the 10Gbps speed of USB 3.1 Gen 2, by adding both USB Type-C and USB Type-A ports
Dual-Port USB 3.1 Card - 10Gbps per port - 1x USB-C, 1x USB-A - PCIe
Add one USB Type-C and one USB Type-A port (10Gbps) to your computer, through a PCI Express slot
Product Support
Drivers & Downloads
Frequently Asked Questions
Before You Buy
This USB parallel device is only intended to be used with printers. Your operating system will register this device as a USB Printer Support device and not as an additional LPT port. If you need a USB parallel device to handle parallel devices in addition to printers, consider the ICUSB2321284.
Copy Link
Was this information helpful? Yes No
Troubleshooting
When you troubleshoot issues with a parallel device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
-
Parallel cables
-
Parallel ports
-
Parallel devices
To test your setup components, try the following:
-
Use the parallel cable, parallel port, and parallel device in another setup to see if the problem is with the components or the setup.
-
Use a different parallel cable, parallel port, and parallel device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
-
Test each cable individually.
-
Use short cables when you are testing.
When you test the parallel ports and parallel device, it is recommended that you do the following:
-
Press the Windows key + R, type devmgmt.msc, and press Enter. Check to see if the parallel ports and parallel device is listed under Ports (COM & LPT).
-
Make sure that the LPT port number is the correct number for the parallel device and that the software being used to connect the computer to the parallel device uses the correct LPT port number.
-
If you do not see the LPT port number in Device Manager please see this FAQ for PCI/PCIe expansion cards: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#pci-pcie-cannot-boot-os-or-detect-windows
or this FAQ for USB devices: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-windows -
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some parallel devices only work if the LPT port number is between a certain range, usually LPT1 or LPT2.
Copy Link
Was this information helpful? Yes No
This issue was the result of a Windows update that has recently been fixed in the KB3140743 update. If you are still experiencing this issue, download the latest Windows update.
You can also temporarily resolve the issue by completing the following:
- Press the Windows key + X.
- Click Device Manager.
- Expand the section for Ports (COM & LPT).
- Right-click on the LPT port that is experiencing the issue.
- Click Properties.
- Click the Port Settings tab.
- Under Filter Resource Method, select an option that is not currently selected.
- Click OK.
Copy Link
Was this information helpful? Yes No
* Product appearance and specifications are subject to change without notice.
Follow us on Twitter | Find us on Google+