Met de MDP2DVIMM3BS 91 cm actieve Mini DisplayPort-naar-DVI-converterkabel kunt u Mini DP-videobron (laptop, Macbook®, Ultrabook™ etc.) direct aansluiten op een nabijgelegen DVI-scherm of -projector, waardoor u niet alleen geen extra adapters nodig hebt, maar ook de warboel van vele kabels vermijdt.
Voor gegarandeerde compatibiliteit met bijna elke Mini DisplayPort-uitgang ondersteunt de Mini DP-naar-DVI-adapter multimode (DP++) en single-mode DisplayPort-signalen. In tegenstelling tot passieve adapters kan de MDP2DVIMM3BS daarom worden gebruikt met grafische kaarten die niet geschikt zijn voor de verzending van multimode DP++ signalen, zoals ATI® Eyefinity-kaarten.
De adapter is compatibel met Intel® Thunderbolt™, bij directe aansluiting op een ondersteunende DisplayPort-over-Thunderbolt™-I/O-poort en ondersteunt resoluties tot 1920x1200.
De MDP2DVIMM3BS wordt gedekt door een 3-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.
Deze adapter is niet compatibel voor gebruik met de Apple Cinema Display.
|Warranty Information||Warranty||3 Years|
|Connector(en)||1 - Connector A||Mini-DisplayPort (20 pin)|
|1 - Connector B||DVI-D (25 pin)|
|Fysieke eigenschappen||Gewicht product||82,0 g [2,9 oz]|
|Kabellengte||0,9 m [3,0 ft]|
|Lengte product||92,0 cm [36,2 in]|
|Breedte product||4,0 cm [1,6 in]|
|Hoogte product||1,5 cm [0,6 in]|
|Gebruiksomgeving||Bedrijfstemperatuur||0°C to 60°C (32°F to 140°F)|
|Opslagtemperatuur||-10°C to 70°C (14°F to 158°F)|
|Vochtigheid||40% - 85% rel. luchtvochtigheid|
|Hardware||Active or Passive Adapter||Active|
|AV-ingang||Mini DisplayPort - 1.2|
|AV-uitgang||DVI-D - Single-Link|
|Chipsetcode||Parade - PS171|
|Prestaties||Audiospecificaties||DVI - No Audio Support|
|Maximale kabellengte||0,9 m [3,0 ft]|
|Maximale digitale resoluties||1920 x 1200|
|Ondersteunde resoluties||1024 x 768
1280 x 720
1920 x 1080
1920 x 1200
|Speciale opmerkingen / vereisten||Systeem- en kabelvereisten||Some dual-link DVI monitors manufactured prior to 2014 may have limited resolutions support when used with this adapter.|
|This adapter is not compatible for use with the Apple Cinema Display.|
|Verpakkingsinformatie||Package Height||1,5 cm [0,6 in]|
|Package Length||22,0 cm [8,7 in]|
|Verzendgewicht (verpakt)||82,2 g [2,9 oz]|
|Package Width||20,0 cm [7,9 in]|
|Wat wordt er meegeleverd||1 - Meegeleverd||Actieve DisplayPort naar DVI adapter|
This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).
When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
To test your setup components, try the following:
Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.
Try the following:
The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue. You may need to connect another monitor or restart the computer or source to accomplish this.
Unfortunately no, this device has an intended source and an intended destination. Refer to the title of the webpage for this order.
Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types:
Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).
Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.
DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.
When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.
If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.
Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.
Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.
Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.
If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.
Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters. For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).
Note: This issue does not apply to the Surface Pro 3 Docking Station.