Dual 4K monitor Thunderbolt 3 mini dock met HDMI - 4K 60Hz

Laptop docking station | Mac & Windows® | Bus-voeding | 2x USB-A

Productcode: TB3DKM2HD

  • Sluit twee UHD 4K 60Hz HDMI-schermen aan op uw laptop met dit draagbare Thunderbolt 3 dockingstation
  • Eenvoudig te installeren en directe gebruiksklaar zonder installatie van stuurprogramma's of noodzaak voor extra adapter
  • Sluit uw apparaten aan met 2x USB-A poorten - 1x USB 3.0 en 1x USB 2.0
Uw prijs
€217,99 EUR excl. VAT
€263,77 EUR incl. VAT

Dit Thunderbolt™ 3 docking station levert een geweldige prestatie in een voordelig, compact mini dock, en biedt essentiële aansluitingen voor productiviteit. Met het Thunderbolt 3 dock met busvoeding kunt u dual 4K HDMI schermen, Gigabit Ethernet en twee USB (Type-A) poorten aansluiten en de vaste USB-C kabel is extra lang (20 cm) voor een flexibele installatie.

Zet een dual-4K 60Hz werkstation op

Dit draagbare Thunderbolt 3 naar HDMI-dock is geweldig voor het bewerken van 4K video of andere Ultra HD-taken en ondersteunt 40 Gbps throughput en 4K resolutie bij 60 Hz op twee HDMI-schermen, via één Thunderbolt 3 poort. Voer veeleisende applicaties uit op twee onafhankelijke schermen zonder de systeembronnen uit te putten.

Verbind uw laptop met:

  • 2x 4K HDMI-schermen (tot 4096 x 2160p @ 60 Hz)

Eenvoudige installatie en gebruik

Sluit het TB3 dock gewoon aan op uw laptop met de meegeleverde TB3 kabel en u kunt direct aan het werk. Geen tijdrovende installatie van stuurprogramma's nodig. 

De poorten die u het meest nodig hebt

Om uw productiviteit te verhogen, garandeert de Gigabit Ethernet poort (met ondersteuning van PXE Boot en Wake-on-LAN) betrouwbare toegang tot vaste netwerken. Met een USB 3.0 Type-A poort, met voldoende ruimte erom heen, kunt u een USB-apparaat, zoals een flashdrive, aansluiten voor eenvoudige toegang tot bestanden. Sluit een ander USB-apparaat aan via de USB 2.0 Type-A poort.

De TB3DKM2HD is Thunderbolt gecertificeerd en wordt gedekt door een 3-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Bekijk/bewerk beeld- of mediabestanden op twee 4K HDMI schermen
  • Verplaats 4K films in minder dan 30 seconden
  • Ideaal voor gedeelde of tijdelijke werkplekken, zoals hot desks (hoteling)

Partnernummers

  • Ingram Micro Netherlands 4270272
  • Tech Data - Netherlands 4789727
  • UPC 065030872911

Compatibility

  • Windows 10 logo
  • Windows 8 logo
  • Windows 7 logo
  • macOS Sierra (10.12) logo
  • macOS High Sierra (10.13) logo
  • macOS Mojave (10.14) logo
  • macOS Catalina (10.15) logo
Windows® 7, 8, 8.1, 10
macOS 10.12 - 10.14

Specificaties

Warranty Information Warranty 3 Years
Connector(en) Type connector(en) 1 - Thunderbolt™ 3 USB-C (24-pin) (40Gbps)
2 - HDMI (19-polig)
1 - USB Type-A (9-polig) USB 3.0 (5 Gbps)
1 - USB Type-A (4-polig) USB 2.0
1 - RJ-45
Fysieke eigenschappen Kleur Black & Gray
Type behuizing Aluminium
Kabellengte 200 mm [7,9 in]
Lengte product 12,4 cm [4,9 in]
Breedte product 61 mm [2,4 in]
Hoogte product 1,9 cm [0,7 in]
Gewicht product 145,8 g [5,1 oz]
Gebruiksomgeving Bedrijfstemperatuur 5°C to 35°C (41°F to 95°F)
Opslagtemperatuur -40°C to 70°C (-40°F to 158°F)
Vochtigheid 5% - 95% rel. vochtigheid (niet-condenserend)
Hardware 4K ondersteuning Ja
Snellaadpoort(en) Nee
Ondersteunde schermen 2
Bus type Thunderbolt 3
Industriestandaarden Thunderbolt 3
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
USB 3.0 - Neerwaarts compatibel met USB 2.0 en 1.1
USB 2.0 - neerwaarts compatibel met USB 1.1
Chipsetcode Intel - Alpine Ridge JHL6540
Intel - WGI210AT
Texas Instruments - TPS65983
ASMedia - ASM1042A
Parade - PS176
Prestaties Maximale overdrachtsnelheid 40 Gbps (Thunderbolt 3)
5 Gbps (USB 3.0)
2 Gbps (Ethernet; full-duplex)
Maximale digitale resoluties Twee 4K schermen - HDMI 4096 x 2160p bij 60 Hz / 3840 x 2160p bij 60 Hz
Type en snelheid Thunderbolt 3 - 40 Gbit/s
UASP ondersteuning Ja
Compatibele netwerken 10/100/1000 Mbps
Auto MDIX Ja
PXE Ja
Full duplex ondersteuning Ja
Software Besturingssystemen Windows® 7, 8, 8.1, 10
macOS 10.12 - 10.14
Speciale opmerkingen / vereisten Systeem- en kabelvereisten Met Thunderbolt 3 uitgeruste computer met een Thunderbolt 3 poort.
Notitie Een voor 4K geschikt scherm is vereist voor 4K x 2K resolutie (4K is ook bekend als 4K x 2K).
Verpakkingsinformatie Verzendgewicht (verpakt) 0,3 kg [0,6 lb]
Package Length 20,8 cm [8,2 in]
Package Width 14,5 cm [5,7 in]
Package Height 36 mm [1,4 in]
Voeding Inclusief voedingsadapter Gevoed via USB
Wat wordt er meegeleverd Meegeleverd 1 - docking station
1 - handleiding

Accessoires

HDMM6

1,8m High Speed HDMI-kabel – Ultra HD 4k x 2k HDMI-kabel – HDMI naar HDMI M/M

Maak Ultra HD-verbindingen tussen uw High Speed HDMI®-apparaten

Uw prijs
€8,99 EUR excl. VAT
€10,88 EUR incl. VAT
UUSBHAUB1

30 cm Micro USB-kabel - A naar Micro B

Voor het opladen of synchroniseren van mobiele apparaten met micro USB-aansluiting vanaf een standaard USB-poort op uw pc of laptop

Uw prijs
€3,99 EUR excl.
€3,99 EUR incl.
UUSBHAUB3

90cm Micro USB-kabel - A naar Micro B

Kabel voor het opladen en synchroniseren van Micro USB-apparaten.

Uw prijs
€3,99 EUR excl.
€3,99 EUR incl.
UUSBHAUB6

6ft Micro USB Cable - A to Micro B

Voor het opladen of synchroniseren van mobiele apparaten met micro USB-aansluiting vanaf een standaard USB-poort op uw pc of laptop

Uw prijs
€4,99 EUR excl. VAT
€6,04 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Troubleshooting

When you connect a Thunderbolt™ device to any Windows operating system that can support Thunderbolt 3, a pop-up message appears. To use your Thunderbolt 3 device do one of the following:

  • Select Connect Only Once.
  • Select Always Connect.

Caution! If you select Do Not Connect, only video will pass through on your Thunderbolt 3 device.

If you accidentally set a Thunderbolt™3 device to not connect to your computer when prompted by the system, you can force the software to prompt you again for authentication. To do so, complete the following:

  1. Right-click the Thunderbolt icon.
  2. Click Approve Attached Devices.
  3. Select the Thunderbolt 3 port that you want to authenticate.

To use a Thunderbolt 3 adapter to output to a display at 60Hz, your monitor must support the refresh rate and you need to set the monitor to work at 60Hz. By default, most monitors are set to DP1.1, which will not work with this Thunderbolt 3 device when you use a display at 60Hz. In most cases, you need to set your monitor's DisplayPort settings to DP1.2.

To resolve this issue, use the buttons on your monitor to change the DisplayPort settings to DP1.2. For more information about changing your monitor settings, refer to the website of the manufacturer of your monitor.

If your computer is not detecting your Thunderbolt™ 3 device, try the following:

  • Update the Thunderbolt software on your Thunderbolt 3 host device.
  • Update the Thunderbolt controller NVM firmware on your Thunderbolt 3 host device.
  • Update the Thunderbolt controller drivers.
  • Update your motherboard BIOS or UEFI.

For more information about how to update the software, firmware, drivers, and BIOS or UEFI, refer to the website of the manufacturer of the Thunderbolt 3 host device. The following website includes links to some of the manufacturers of Thunderbolt 3 host devices: https://thunderbolttechnology.net/updates. If the manufacturer of your host device is not listed, you should contact the manufacturer or refer to their website for more information.

For more information about how to check which version of the Thunderbolt software and firmware you are currently using, see the following FAQ: https://www.startech.com/faq/thunderbolt-3-check-software-firmware.

For more information about Thunderbolt 3 host system and motherboard compatibility, refer to the Thunderbolt 3 Compatibility and Troubleshooting guide.

If you are only getting a single display to work with your Thunderbolt™3 device, make sure that your Thunderbolt 3 host device can support two separate DisplayPort lines over Thunderbolt 3. 

While Thunderbolt 3 supports dual monitors over a single connection, not all Thunderbolt 3 host devices are designed to meet this requirement. If your Thunderbolt 3 host device does not meet this requirement, you cannot troubleshoot this issue with software, firmware, or driver updates, and you cannot use this device to achieve dual displays over Thunderbolt 3. If you are not sure whether your Thunderbolt 3 host device supports dual monitors, contact your Thunderbolt 3 host device manufacturer.

If you confirmed that your Thunderbolt 3 host device does support dual monitors and you are only seeing a single display, see the following FAQ: https://www.startech.com/faq/thunderbolt-3-update-software-firmware.

For more information about Thunderbolt 3 host system and motherboard compatibility, refer to the Thunderbolt 3 Compatibility and Troubleshooting guide.

If you set your display to [email protected] and connect a display to the DisplayPort output on the laptop docking station, your display may flicker. This issue only affects certain monitors and is a result of an interoperability issue between the hardware used in the display and the docking station. This issue is not specific to StarTech.com docking stations.

To resolve this issue, try any of the following:

  • Connect a USB-C to DisplayPort cable from the USB-C Thunderbolt 3 port on the docking station to the DisplayPort input on the display. (StarTech.com product ID for the USB-C to DisplayPort cable: CDP2DPMM1MB.)
  • Connect a USB-C to HDMI 2.0 cable from the USB-C Thunderbolt 3 port on the docking station to the HDMI input on the display. (StarTech.com product ID for the USB-C to HDMI 2.0 cable: CDP2HD4K60.)
  • If you are using a dual monitor setup, connect a dual DisplayPort adapter from the USB-C Thunderbolt 3 port on the docking station to the DisplayPort input on the displays. (StarTech.com product ID for the Thunderbolt 3 dual DisplayPort adapter: TB32DP2.)
  • Disable MST (Multi Stream Transport) or DisplayPort 1.2 mode on your display and enable [email protected] Refer to the information provided by the manufacturer for assistance. 

Voor uw aanschaf

No, you cannot use this device to increase the maximum number of displays that a video card supports. For example, if your video card only supports up to three displays and you add this device to your setup, your display limit is still three displays.

If you have connected more than one of this device to the same computer and are experiencing display issues, you should make sure that your video card can support the number of displays that you are using in your setup.

Although the Thunderbolt™ 3 standard is capable of data transfer speeds up to 40Gbps, not every cable can support this bandwidth. For example, cables over a certain length or made with certain materials are only capable of data transfer speeds up to 20Gbps. 

To confirm the capability of your Thunderbolt 3 cable, refer to the information provided by the manufacturer. StarTech.com lists the capabilities of the Thunderbolt 3 cables on the individual product pages.

There are two different Thunderbolt 3 cable symbols: the 20Gbps symbol and the 40Gbps symbol. The 20Gbps symbol is composed of the Thunderbolt 3 symbol, and the 40Gbps symbol is composed of the Thunderbolt 3 symbol and the number three. These images are shown below.

Components

Thunderbolt™ 3 is the latest version of the Thunderbolt standard for connecting computers and electronic devices. It is capable of the following:

  • Total bandwidth up to 40Gbps. Data transfer speeds are dependent on the other features that you are using in your setup.
  • USB 3.1 Gen 2 support.
  • 4K 60Hz video on one or two separate displays.
  • 5K 60Hz video on a single display.
  • A 10 GbE network connection between two Thunderbolt 3 compatible computers.
  • Up to six devices daisy-chained from a single Thunderbolt 3 port.
  • Alternate modes, such as DisplayPort Alternate Mode (DP Alt Mode).
  • Bi-directional power delivery up to 100W (not all Thunderbolt 3 devices support power delivery).

USB-C and Thunderbolt 3

Thunderbolt 3 uses the USB-C connector, but not all host connections, cables, and devices with a USB-C connector support Thunderbolt 3. This means that a USB-C device is compatible with a Thunderbolt 3 host connection, but a Thunderbolt 3 device is not compatible with a USB-C host connection. Therefore, it is important to know whether you have a USB-C or a Thunderbolt 3 host, cable, or device.

To determine if your component is a Thunderbolt 3 device, look for the Thunderbolt 3 symbol (shown below). USB-C devices do not include this symbol.  For more information about USB-C, see the following FAQ: https://www.startech.com/faq/usb-c-port-capabilites.

Thunderbolt symbol: https://sgcdn.startech.com/005329/media/products/gallery_large/TBLT3MMXM.B.jpg.

Backwards compatibility

If you use an adapter, Thunderbolt 3 host connections are compatible with Thunderbolt 1 and Thunderbolt 2 devices. You can use the StarTech.com TBT3TBTADAP to make a Thunderbolt 3 host connections backwards compatible.

Thunderbolt 3 devices are not backwards compatible with Thunderbolt 1 and Thunderbolt 2 host connections.

Thunderbolt 3 uses the USB-C connector, but not all host connections, cables, and devices with a USB-C connector support Thunderbolt 3. This means that a USB-C device is compatible with a Thunderbolt 3 host connection, but a Thunderbolt 3 device is not compatible with a USB-C host connection. Therefore, it is important to know whether you have a USB-C or a Thunderbolt 3 host, cable, or device.

To determine if your component is a Thunderbolt 3 device, look for the Thunderbolt 3 symbol (shown below). USB-C devices do not include this symbol.  For more information about USB-C, see the following FAQ: http://www.startech.com/faq/usb-c-port-capabilites.

Thunderbolt symbol: https://sgcdn.startech.com/005329/media/products/gallery_large/TBLT3MMXM.B.jpg.

Hoe gaat u te werk

You can use the Thunderbolt™ software to manage your Thunderbolt 3 devices on a computer running a version of Windows. To manage your Thunderbolt 3 devices, complete the following:

  1. Click Start.
  2. Type Thunderbolt and click on the search result.
  3. Right-click the Thunderbolt icon.
  4. Click Manage Approved Devices.

If you accidentally set a Thunderbolt™3 device to not connect to your computer when prompted by the system, you can force the software to prompt you again for authentication. To do so, complete the following:

  1. Right-click the Thunderbolt icon.
  2. Click Approve Attached Devices.
  3. Select the Thunderbolt 3 port that you want to authenticate.

When you connect a Thunderbolt™ device to any Windows operating system that can support Thunderbolt 3, a pop-up message appears. To use your device, complete the following:

  1. In the New Thunderbolt devices have been attached pop-up message, click OK.
  2. In the User Account Control pop-up message, click Yes.
  3. In the Approve Thunderbolt Devices pop-up message, do one of the following:
    • If you want to authorize your Thunderbolt devices every time that you connect them, select Connect Only Once in the drop-down list.
    • If you want to authorize your Thunderbolt devices only once, select Always Connect in the drop-down list.
  4. Click OK.

If you accidentally set your Thunderbolt device to Do Not Connect in step three above, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-denied-authentication.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven