Universeel USB 3.0 laptop mini-docking station met HDMI, GbE - USB 3.0 gigabit Ethernet-adapter NIC met HDMI

Voeg een gigabit Ethernet RJ45-poort en een HDMI-uitgang toe aan uw laptop met een beperkt aantal poorten via één USB 3.0 poort

Productcode: USB31GEHD

  • 1x 10/100/1000 Mbps netwerkpoort, 1x HDMI uitgang
  • USB-busvoeding - geen externe voedingsadapter vereist
  • Compact, slank en licht design voor maximale mobiliteit
Uw prijs
€99,99 EUR excl. BTW
€120,99 EUR incl. BTW

Met de USB31GEHD USB 3.0 mini-dockingstation adapter kunt u gigabit Ethernet en HDMI®-aansluitpoorten toe aan uw Ultrabook™, laptop of desktop via één USB 3.0 host, waardoor u beschikt over twee aansluitpoorten die niet altijd aanwezig zijn op moderne draagbare computers.

Deze adapter biedt volledige gigabit bandbreedte voor snellere netwerkverbindingen en maakt optimaal gebruik van de 5 Gbps capaciteit van de USB 3.0 interface ter ondersteuning van 10/100/1000 Mbps Ethernet. Bovendien is de adapter volledig compatibel met IEEE 802.3/u/ab standaards. Daarnaast fungeert de gigabit-adapter als een externe grafische kaart, waardoor u een extern scherm kunt toevoegen aan uw laptopscherm, met 2048x1152 video en 5.1 surround sound audio (alleen vanaf de HDMI®-poort).

Deze adapter met USB-voeding is een ideale multi-poorts combo-adapter voor mobiele of vaste omgevingen heeft geen externe voedingsadapter nodig en is dus de perfecte laptopaccessoire die precies in uw reistas past dankzij het compacte en draagbare design.

De mini docking station adapter garandeert een snelle en eenvoudige installatie door het automatisch downloaden van het meest recente stuurprogramma naar Windows®-systemen met een actieve netwerkverbinding, en is neerwaartse compatibel met USB 2.0 systemen (snelheid beperkt door de USB-bus).

Gedekt door een 3-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Los beperkte verbindingsmogelijkheden op door twee essentiële verbindingspoorten aan uw laptop toe te voegen
  • Voltooi uw werk onderweg, een ideale reisgenoot voor uw Ultrabook™, laptop of netbook
  • Sluit uw laptop aan op een vast gigabit-netwerk in situaties waar geen wifi-verbinding aanwezig is zoals in klaslokalen, kantoren en hotels
  • Vervang een defecte geïntegreerde Ethernet-poort van een laptop of upgrade naar een 1000 Mbps gigabit-verbinding
  • Voeg één extra scherm toe aan uw computer met externe schermondersteuning - controleer uw e-mails op uw laptopscherm terwijl u op het internet surft via een extern scherm
  • Sluit uw HDMI-projector aan en toon aantrekkelijke presentaties of multimedia-inhoud

Het voordeel van StarTech.com

  • Vereist slechts één USB 3.0 hostverbinding voor volledige gigabit bandbreedte en HDMI® uitgang
  • Neem de adapter overal mee dankzij de reisvriendelijke en compacte USB-voeding, waardoor een externe voeding niet meer nodig is.
  • Snelle, probleemloze installatie met automatisch downloaden van stuurprogramma's naar Windows pc's via een actieve netwerkverbinding

Partnernummers

  • Ingram Micro Netherlands 2692208
  • Tech Data - Netherlands 4462444
  • UPC 065030856751

Compatibility

  • Windows 8 logo
  • Windows 7 logo
  • Windows 10 logo
  • Windows 11 logo
  • Mac OS X El Capitan (10.11) logo
  • macOS Sierra (10.12) logo
  • macOS Mojave (10.14) logo
  • macOS Catalina (10.15) logo
  • macOS Big Sur (11.0) logo
Windows® XP SP3 (32-bits), Vista, 7, 8, 8.1, 10
Mac OS® 10.6 tot 10.12, 10.14 - 10.15

Specificaties

Warranty Information Warranty 3 Years
Connector(en) 1 - Type connector(en) USB Type-A (9-polig) USB 3.0 (5 Gbps)
RJ-45
HDMI (19-polig)
Fysieke eigenschappen Gewicht product 43,0 g [1,5 oz]
Kleur Zwart
Type behuizing Kunststof
Kabellengte 111 mm [4,4 in]
Lengte product 65,0 mm [2,6 in]
Breedte product 65,0 mm [2,6 in]
Hoogte product 1,9 cm [0,7 in]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 40°C (32°F to 104°F)
Opslagtemperatuur -20°C to 70°C (-4°F to 158°F)
Vochtigheid 10-90% RV
Hardware 4K ondersteuning Nee
Snellaadpoort(en) Nee
Ondersteunde schermen 1
Bus type USB 3.0
Industriestandaarden IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
USB 3.0 hub-poort is neerwaarts compatibel met USB 2.0/1.1
Chipsetcode DisplayLink - DL-3700
Indicatoren 1 - LED-indicatoren Verbinding
Activiteit
Prestaties Maximale overdrachtsnelheid 5 Gbps (USB 3.0)
2 Gbps (Ethernet; full-duplex)
Maximale digitale resoluties 2048x1152 (HDMI)
Lagere resoluties worden ook ondersteund.
Type en snelheid USB 3.0 - 5 Gbit/s
Compatibele netwerken 10/100/1000 Mbps
Auto MDIX Ja
Full duplex ondersteuning Ja
Algemene specificaties This USB video adapter uses a DisplayLink family chipset. If you’re connecting this device to a computer along with additional USB video adapters or docking stations, please avoid using devices with a Trigger or Fresco family chipset.
Software Besturingssystemen Windows® XP SP3 (32-bits), Vista, 7, 8, 8.1, 10
Mac OS® 10.6 tot 10.12, 10.14 - 10.15
Speciale opmerkingen / vereisten Systeem- en kabelvereisten USB-computersysteem met beschikbare USB 3.0 poort
Notitie Uitgebreidingsschermen worden momenteel alleen ondersteund bij DisplayLink producten met macOS 10.11 tot 10.13.3. Dit kan in toekomstige versies veranderen.
Verpakkingsinformatie Package Height 33,0 mm [1,3 in]
Package Length 14,6 cm [5,7 in]
Verzendgewicht (verpakt) 152,0 g [5,4 oz]
Package Width 17,2 cm [6,8 in]
Voeding Inclusief voedingsadapter Gevoed via USB
Wat wordt er meegeleverd 1 - Meegeleverd USB 3.0 mini-dockingadapter
Driver-CD
Handleiding

Accessoires

USB3SEXT1MBK

1m SuperSpeed USB 3.0 Verlengkabel A naar A - Zwart M/F

Verleng uw SuperSpeed USB 3.0-kabel met 1 meter

Uw prijs
€9,99 EUR excl. BTW
€12,09 EUR incl. BTW
HDMM6

1,8m High Speed HDMI-kabel – Ultra HD 4k x 2k HDMI-kabel – HDMI naar HDMI M/M

Maak Ultra HD-verbindingen tussen uw High Speed HDMI®-apparaten

Uw prijs
€10,99 EUR excl. BTW
€13,30 EUR incl. BTW
HDDVIMF8IN

20cm HDMI naar DVI-D Video adapter kabel - M/F

Sluit een DVI-apparaat aan op met HDMI® uitgevoerd apparaat via een standaard DVI-D-kabel

Uw prijs
€12,99 EUR excl. BTW
€15,72 EUR incl. BTW
USB31CAADP

USB-C naar USB-A adapter - USB 3.0

Sluit uw USB Type-C laptop aan op een ouder USB randapparaat, met deze duurzame adapter

Uw prijs
€15,99 EUR excl. BTW
€19,35 EUR incl. BTW

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

Note: Do not physically connect the USB laptop docking station to your computer until you are instructed to (Step 6).

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

    Note: Windows will typically save the files to the Downloads folder associated with your user account (for example, C:\Users\your_name\Downloads).
     
  2. Once the download is complete, extract the files from the zip folder. Right-click the DisplayLink.zip or DisplayLinkDock.zip file, select Extract All and follow the on-screen instructions.
  3. Select the appropriate folder for your operating system.
  4. Right-click Setup.exe. 
  5. Click Run as Administrator.

    Note: If the Run as Administrator option is not available, you may be attempting to run the installer from within the zipped file. Please extract the files using the instructions in Step 2.
     
  6. Follow the on-screen prompts to install the device drivers and software. Restart the computer either when prompted, or when the installer disappears.
  7. Connect any video cables from your display(s) to the video port(s) on the docking station. 
  8. Once Windows has restarted, connect the docking station to your computer.
  9. Your computer will automatically complete the driver installation.

Note: Installation may take several seconds to complete. During the installation your display might flicker. This is normal.  Once the installation is complete you will see your Windows desktop extended to the additional monitor(s).

Note: Do not physically connect the USB laptop docking station to your computer until instructed to (Step 6).

  1. Log in to the computer as the local administrator.
  2. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

    Note: Windows typically saves the files to the Downloads folder associated with your user account (for example, C:\Users\your_name\Downloads.
     
  3. Once the download is complete, extract the files from the zip file. (Right-click the DisplayLink.zip file, select Extract All and follow the on-screen instructions.)
  4. Select the appropriate folder for your operating system.
  5. Double-click Setup.exe.
  6. Follow the on-screen prompts to install the device drivers and software. Restart the computer either when prompted, or when the installer disappears.
  7. Once Windows has restarted, connect the USB laptop docking station to your computer.
  8. Your computer will automatically complete the driver installation.

Note: Installation may take several seconds to complete. During the installation your display may flicker. This is normal. Once the installation has completed you will see your Windows desktop extended to the additional monitor.

Note: Do not physically connect the laptop docking station to your computer until instructed to (Step 7).

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Mac OS X will typically save the files to the Downloads folder that is associated with your user account (for example, hard_drive_name\Users\your_name\Downloads).

  1. Double-click the DisplayLink.zip file.
  2. Double-click the MAC OS folder.
  3. Double-click the appropriate folder for your operating system.
  4. Double-click the DisplayLink Installer 75598.dmg file.
  5. Follow the prompts to install the new drivers. Restart the computer when prompted.
  6. Once Mac OS X has restarted, connect the laptop docking station to your computer.

Note: Installation might take several seconds to complete. During the installation your display might flicker; this is normal. Once the installation has completed you will see your Macintosh desktop extended to any connected monitors.

To install your USB laptop docking station in Ubuntu 15.0 (kernel 3.16), you need to download the Dynamic Kernel Module Support (DKMS) package and the adapter driver.

To install the DKMS package, complete the following:

  1. On your desktop, click the Ubuntu icon, type terminal, and then press Enter.
  2. Type sudo apt-get install dkms, and then press Enter.

When the DKMS package is installed, complete the following:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product packaging.

Note: Ubuntu typically saves the files to the Downloads folder that is associated with your user account (for example, ~/Downloads).

  1. When the download is complete, open the zip folder that you downloaded and click and drag the Ubuntu folder to your desktop.
  2. Click the Ubuntu icon, type terminal, and then press Enter.
  3. Type cd ~/Desktop/Ubuntu, and then press Enter.
  4. Type chmod 755 displaylink-driver-1.1.62.run, and then press Enter.
  5. Type sudo ./displaylink-driver.run, and then press Enter.
  6. When the driver package finishes installing, restart your computer. To restart your computer, type sudo reboot, and then press Enter.
  7. When Ubuntu finishes restarting, connect the USB video adapter to your computer.

Note: It can take several minutes to complete the installation. During this time, your display might flicker, but this is normal behavior. When the installation is complete, your Ubuntu desktop is extended to the additional monitor.

Troubleshooting

Als het beeldscherm dat via uw USB-beeldschermadapter is aangesloten niet wordt ingeschakeld nadat het langere tijd in de slaapstand heeft gestaan, heeft Windows waarschijnlijk automatisch de USB root hub uitgeschakeld om energie te besparen. 

De onderstaande stappen beschrijven hoe u de USB root hub zodanig configureert dat het beeldscherm ingeschakeld blijft als het in de slaapstand staat, zodat dit probleem niet meer voorkomt.
 

Windows 8 / 10

  1. Druk op uw toetsenbord op de Windows-toets + X en selecteer Configuratiescherm.
  2. Klik op Hardware en geluiden, en klik dan op Energieopties.
  3. Klik op Schema-instellingen wijzigen voor het schema dat u wilt wijzigen.
  4. Klik op Gevanceerde energie-instellingen wijzigen.
  5. Klik op het plusteken (+) naast "USB-instellingen" en "Instelling voor selectieve USB-onderbreking" om de opties uit te klappen en de instelling in Uitgeschakeld te wijzigen.
  6. Klik op OK om de instelling toe te passen.

NB: U moet wellicht uw USB-beeldschermadapter loskoppelen en weer aansluiten nadat u deze instellingen hebt toegepast om weer verbinding te maken.

Windows 7 / Vista

  1. Klik op de knop Start en selecteer Configuratiescherm.
  2. Klik op Hardware en geluiden, en klik dan op Energieopties.
  3. Klik op Schema-instellingen wijzigen voor het schema dat u wilt wijzigen.
  4. Klik op Gevanceerde energie-instellingen wijzigen.
  5. Klik op het plusteken (+) naast "USB-instellingen" en "Instelling voor selectieve USB-onderbreking" om de opties uit te klappen en de instelling in Uitgeschakeld te wijzigen.
  6. Klik op OK om de instelling toe te passen.

NB: U moet wellicht uw USB-beeldschermadapter loskoppelen en weer aansluiten nadat u deze instellingen hebt toegepast om weer verbinding te maken.

Windows XP

  1. Klik op uw bureaublad met de rechtermuisknop op het pictogram  Mijn computer en selecteer Eigenschappen.
  2. Klik op het tabblad Apparaatbeheer.
  3. Klap USB-controllers uit door op de pijl links ernaast te klikken.
  4. Klik met de rechtermuisknop op het eerste USB Root Hub apparaat en selecteer Eigenschappen.
  5. Klik op het tabblad Energiebeheer.
  6. Verwijder het vinkje in het vak naast De computer mag dit apparaat uitschakelen om energie te besparen.
  7. Klik op OK om de instelling toe te passen.
  8. Herhaal stap 4-7 voor alle resterende apparaten in het gedeelte USB-controllers met "Root Hub" in de naam.

NB: U moet wellicht uw USB-beeldschermadapter loskoppelen en weer aansluiten nadat u deze instellingen hebt toegepast om weer verbinding te maken.

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

When you troubleshoot issues with a laptop docking station, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video source

  • Video destination

  • Laptop docking station

  • USB peripherals

  • Ethernet connection

To test your setup components, try the following:

  • Use the video cables, video source, video destination, laptop docking station, USB peripherals, and Ethernet connection in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, video source, video destination, laptop docking station, USB peripherals, and Ethernet connection setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video cables, video source, video destination, and laptop docking station it is recommended that you do the following:

  1. Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager.

  2. If you do not see the USB video adapter in Device Manager, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-windows.

  3. If the device is listed with an error, reinstall the drivers following the instructions on the website.

  4. Check to see if your video card drivers are current. You can check what video card you have in Device Manager under Display adapters. It is recommended that you go directly to the video card manufacturer's website to check for the latest drivers.

  5. Check to see if the monitor is being detected by Windows.

For more information about testing the USB peripherals and the laptop docking station, visit www.startech.com/faq/usb_hubs_general_troubleshooting.

When you test Ethernet and the laptop docking station, refer to the following FAQ: http://www.startech.com/faq/network_adapters_general_troubleshooting.

When you test sound and the laptop docking station, refer to the following FAQ: http://www.startech.com/faq/sound_cards_general_troubleshooting.

If hardware acceleration is enabled on any of your software applications, it can result in poor resource management and limit the performance of your video device. If you experience this problem, you should disable hardware acceleration in the program(s) that were impacted. 

To disable hardware acceleration in common applications and operating systems, complete one of the following series of steps, depending on what software application(s) or operating system that you are running.

Internet Explorer 9 and later

Note: Earlier versions of Internet Explorer do not use hardware acceleration.

  1. Click the Start button.
  2. Open Control Panel.
  3. Click Network and Internet.
  4. Click Internet Options.
  5. Click the Advanced tab.
  6. Browse to the Accelerated graphics screen.
  7. Select the Use software rendering instead of GPU rendering check box.
  8. Click Apply.
  9. Restart your computer.

Mozilla Firefox

  1. Open Firefox.
  2. Press the Alt key.
  3. Click Tools and Options.
  4. Click the Advanced icon.
  5. Click the General tab.
  6. Under Browsing, clear the Use hardware acceleration when available check box.
  7. Click the OK button.
  8. Restart your web browser.

Google Chrome

  1. Open Google Chrome.
  2. Click the Options icon (it has three horizontal lines on it).
  3. Click Settings.
  4. Click Show advanced settings.
  5. Scroll to the bottom of the screen and clear the Use hardware acceleration when available check box.
  6. Restart your web browser.

Microsoft Office 2013 / 2010

  1. Open any program in Microsoft Office (for example, Microsoft Word).
  2. Click the File tab.
  3. In the menu on the left side of the screen, click Options.
  4. Click Advanced.
  5. Under Display, select the Disable hardware graphics acceleration check box.
  6. Close and restart all of the Microsoft Office programs that you had open.

Windows 10 / 8

  1. Press the Windows key +X.
  2. Click Control Panel.
  3. Click Personalization.
  4. Select a high-contrast theme.

Windows 7 / Vista 

  1. Click the Start button.
  2. Click Control Panel.
  3. Click Personalization.
  4. Select a non-Aero theme. Ideally, you should select a basic and high-contrast theme.

Windows XP

  1. Click the Start button.
  2. Open the Control Panel.
  3. Select Display.
  4. Click the Settings tab.
  5. Click Advanced.
  6. Click the Troubleshooting tab.
  7. Move the Hardware Acceleration slider to None.
  8. Restart your computer.

Hoe gaat u te werk

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Voor uw aanschaf

Whether this device works with the Chrome OS™ operating system or not depends on the version of the Chrome OS operating system that you’re running and the model of the Chromebook™ notebook computer that you’re using.

Existing DisplayLink® enabled USB 3.0 products natively support Chrome OS build version R55 and later, but not all Chromebook notebook computers running build version R55 and later natively support DisplayLink. Support for DisplayLink is being rolled out to Chromebook notebook computers in a series of releases. To see the build version of the Chrome OS operating system that supports DisplayLink and corresponds to the model of the Chromebook notebook that you’re using, view the following knowledge base article on the DisplayLink website: http://support.displaylink.com/knowledgebase/articles/891030.

No, you cannot use this docking station to charge a connected laptop computer.

To see a list of laptop docking stations that can charge a connected laptop, refer to the following FAQ: https://www.startech.com/faq/laptop-docking-stations-will-charge-laptop.

This device outputs HDMI video signals. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

HDCP

When you consider whether to convert an HDMI video signal to another connection type, it is important to know if the media that is being converted from the HDMI video connection is protected by High-bandwidth Digital Content Protection (HDCP). If the media is protected by HDCP, you cannot convert to analog video connections because they do not support HDCP. You may experience this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles.

Target connection Conversion
VGA HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.
DVI

HDMI to DVI: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.

DisplayPort HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

 

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven