2 poorts DisplayPort dual-monitor KVM switch - 4K 60Hz

Krijg toegang tot dual monitor computers en twee gedeelde USB-randapparaten vanaf één werkstation

Productcode: SV231DPDDUA2

  • Maximale productiviteit met twee schermen en toegang tot meerdere computers
  • Volledige multimedia bediening met aparte 3,5 mm AUX-ondersteuning
  • Verbazingwekkende beeldkwaliteit met ondersteuning van Ultra HD 4K resoluties bij 60 Hz
Uw prijs
€496,99 EUR excl. BTW
€601,36 EUR incl. BTW

Deze dubbele DisplayPort KVM switch combineert de volgende generatie digitale schermstandaards met naadloze KVM-besturing. De 2-poorts KVM switch ondersteunt audio en USB-randapparaten en kan met twee schermen worden gebruikt, waardoor u eenvoudig een multimedia-werkplek kunt maken waar u kunt schakelen tussen twee dual-head of twee DisplayPort-systemen.

Maximale productiviteit met dubbele video

Deze KVM switch biedt maximale productiviteit door ondersteuning van twee DisplayPort-video-ingangen en twee verschillende computers.U hebt toegang tot meerdere computers, waardoor u kunt multitasken en uw productiviteit kunt vergroten. Elk van de DP-poorten ondersteunt resoluties tot 4K voor maximale schermweergave.

Ook kunt u voordelige adapters gebruiken voor een configuratie met twee schermen via de secundaire HDMI- of DVI-poort van uw computer.

Verbazingwekkende beeldkwaliteit

De dubbele DisplayPort KVM switch ondersteunt resoluties tot Ultra HD 4K bij 60 Hz, en kan gemakkelijk twee grote DP-schermen aansturen. Daardoor is hij de ideale oplossing voor het maken van werkplekken waar hoogwaardige beeldvorming van cruciaal belang is, zoals bij grafisch ontwerpen.

Volledige multimediabediening

De KVM switch heeft extra 3,5 mm audiopoorten waarmee u onafhankelijke analoge audio kunt delen, vanaf elke aangesloten computer, met de luidsprekerset van uw desktop. Onafhankelijke audio, samen met dubbele 4K DP video, geeft u volledige multimediabediening van verschillende computers, waardoor deze KVM switch perfect is voor creatieve professionele applicaties zoals video- en geluidsdesign of -bewerking.

Comfortabel delen van randapparaten

Deze KVM switch heeft een geïntegreerde 2-poorts USB hub, los van uw HID-toetsenbord en -muis. Daardoor kunt u USB-randapparaten delen met elke aangesloten computer en de kosten van afzonderlijke apparatuur voorkomen. De USB hub schakelt uw aangesloten USB-apparaten automatisch naar de geselecteerde computer, waardoor u voorkomt dat u al uw computers van eigen randapparaten moet voorzien. Dit voorkomt ongemak en elimineert.kosten.  

De SV231DPDDUA2 wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Bedien twee computers elk met dual-head videokaarten, vanaf één werkstation
  • Werk met multimediaprogramma's zoals 4K video's en foto's bewerking
  • Bedien meerdere computers van een productielijn
  • Installeer in uw serverruimte voor toegang tot meerdere computers
  • Voer taken met hoge resolutie uit zoals grafisch ontwerpen of het maken van CAD-tekeningen

Partnernummers

  • Ingram Micro Netherlands 3587844
  • Tech Data - Netherlands 4662406
  • UPC 065030867177

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 4 - Console-aansluiting(en) USB Type-A (4 pin) USB 2.0
2 - Console-aansluiting(en) DisplayPort (20 pin)
3.5 mm Mini-Jack (3 Position)
2 - Hostaansluitingen USB B (4 pin)
4 - Hostaansluitingen DisplayPort (20 pin)
3.5 mm Mini-Jack (3 Position)
Fysieke eigenschappen Lengte product 100.0 mm [3.9 in]
Gewicht product 734.0 g [25.9 oz]
Kleur Black
Type behuizing Steel
Breedte product 16.1 cm [6.3 in]
Hoogte product 5.8 cm [2.3 in]
Diepte product 100 mm [3.9 in]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 40°C (32°F to 104°F)
Opslagtemperatuur -20°C to 50°C (-4°F to 140°F)
Vochtigheid 0% - 80% rel. luchtvochtigheid
Hardware Audio Yes
KVM-poorten 2
Ondersteunde platforms USB
PC-videotype DisplayPort
Multi-monitor 2
Rack-monteerbaar No
Inclusief kabels No
Op elkaar aansluitbaar No
Indicatoren 2 - LED-indicatoren computer-LED's
Prestaties Schermmenu & sneltoetsen No
DVI-ondersteuning No
IP-controle No
Hot-Key Selection Yes
Maximale digitale resoluties 3840 x 2160 (Ultra HD 4K) @ 60hz
Ondersteunde resoluties 1024x768
1280x720 (High-definition 720p)
1920x1080 (High-definition 1080p)
1920x1200
2560x1600
3840 x 2160 (4K)@ 60hz
Beeldverhouding 16:9
Ondersteuning breedbeeld: Yes
Maximum aantal gebruikers 1
Poortselectie-ondersteuning Push Button and Hotkeys
MTBF 138000 uur
Verpakkingsinformatie Package Height 97.0 mm [3.8 in]
Package Length 24.9 cm [9.8 in]
Verzendgewicht (verpakt) 1.2 kg [2.6 lb]
Package Width 18.6 cm [7.3 in]
Voeding Inclusief voedingsadapter AC Adapter Included
Ingangsspanning 100 - 240 AC
Ingangsstroom 0.6 A
Uitgangsspanning 12V DC
Uitgangsstroom 1.5 A
Polariteit pin midden Positive
Wat wordt er meegeleverd 1 - Meegeleverd KVM-switch
universele voedingsadapter (NA/JP, EU, VK, ANZ)
Handleiding
4 - Meegeleverd Rubberen voetjes

Accessoires

IM12D1500P

12V DC 1,5A Universele voedingsadapter

Vervang uw 12 V DC (1,5 A) voedingskabel door een betrouwbare verbinding

Uw prijs
€22,99 EUR excl. BTW
€27,82 EUR incl. BTW
SVA12M2NEUA

DC power adapter - 12V, 2A - voedingsadapter

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€25,99 EUR excl. BTW
€31,45 EUR incl. BTW
DISPLPORT6L

2m DisplayPort 1.2 Kabel - 4K x 2K Ultra HD VESA Gecertificeerde DisplayPort Kabel - DP naar DP Video Kabel voor Scherm/Monitor/Display - Latching DP Connectors

Maak 4K x 2K hoge-resolutieverbindingen met HBR2-ondersteuning tussen uw DisplayPort apparaten

Uw prijs
€19,99 EUR excl. BTW
€24,19 EUR incl. BTW
SVA12M5NA

DC power adapter - 12V, 5A - voedingsadapter

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€65,99 EUR excl. BTW
€79,85 EUR incl. BTW
DISPLPORT10L

3m DisplayPort 1.2 Kabel - 4K x 2K Ultra HD VESA Gecertificeerde DisplayPort Kabel - DP naar DP Video Kabel voor Scherm/Monitor/Display - Latching DP Connectors

Maak 4K x 2K hoge-resolutieverbindingen met HBR2-ondersteuning tussen uw DisplayPort apparaten

Uw prijs
€25,99 EUR excl. BTW
€31,45 EUR incl. BTW
Uw prijs
€2,99 EUR excl. BTW
€3,62 EUR incl. BTW
MU1MMS

1 ft Slim 3.5mm Stereo Audio Cable - M/M

Sluit een iPhone® of andere MP3-speler aan op een autoradio

Uw prijs
€3,99 EUR excl. BTW
€4,83 EUR incl. BTW
MU3MMS

90cm Slanke 3,5mm Stereo Audiokabel - M/M

Sluit gemakkelijk een iPod of andere MP3-speler aan op een autoradio

Uw prijs
€3,99 EUR excl. BTW
€4,83 EUR incl. BTW
MU6MMS

1,8 m slanke 3.5mm Stereo Audio kabel - M/M

Connect an iPhone® or other MP3 player to a car stereo

Uw prijs
€3,99 EUR excl. BTW
€4,83 EUR incl. BTW
MU10MMS

3 m slanke 3.5mm Stereo Audio kabel - M/M

3m slanke 3,5mm Stereo Aux kabel

Uw prijs
€4,99 EUR excl. BTW
€6,04 EUR incl. BTW
MU15MMS

4,5 m slanke 3.5mm Stereo Audio kabel - M/M

Easily connect an iPod or other MP3 player to your stereo

Uw prijs
€5,99 EUR excl. BTW
€7,25 EUR incl. BTW

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

  1. Turn off all of the computers and monitors that will be connected to the KVM switch.
  2. Connect the power adapter to the KVM switch.
  3. Connect the video cables from your monitors to the console video port on the KVM switch. 
  4. Turn on the monitors.
  5. Connect your keyboard and mouse to the console PS/2 or USB ports on the KVM switch.
  6. If you have not done so already, change the KVM switch to focus on port 1.
  7. Connect the video cables from PC1 to the KVM switch.
  8. Connect the PS/2 or USB cables from PC1 to the PC1 PS/2 or USB ports on the KVM switch.
  9. Turn on PC1. You should see the computer load the operating system that you are using on PC1.
  10. Make sure that the mouse and keyboard can control PC1.
  11. Repeat steps 4 to 8 for each additional computer that you want to connect to the KVM switch. Leave the computer in focus until you make sure that the mouse and keyboard can control the computer in step 8.
  1. Turn off all of the computers and monitors that will be connected to the KVM switch.
  2. Connect the power adapter to the KVM switch.
  3. Connect the DisplayPort cables from your monitors to the console DisplayPort ports on the KVM switch. 
  4. If it is not already turned on, turn on the monitor.
  5. Connect your keyboard and mouse to the console PS/2 or USB ports on the KVM switch.
  6. If you have not done so already, change the KVM switch to focus on port 1.
  7. Connect the DisplayPort cables from PC1 to the KVM switch.
  8. Connect the PS/2 or USB cables from PC1 to the PC1 PS/2 or USB ports on the KVM switch.
  9. Turn on PC1. You should see the computer load the operating system that you are using on PC1.
  10. Make sure that the mouse and keyboard can control PC1.
  11. Repeat steps 4 to 8 for each additional computer that you want to connect to the KVM switch. Leave the computer in focus until you make sure that the mouse and keyboard can control the computer in step 8.

 

Troubleshooting

There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds.  Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.

You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • KVM switch

  • Video source (such as a DVR or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.

To test your setup components, try the following:

  • Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.

There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch. 

  • To determine if a specific cable is the source of the problem, switch the cables that connect the KVM switch to the computers to one working port and computer, and one port and computer that is not working. Keep the computer plugged into the same ports and only switch the cables. If the issue persists when you switch cables, the issue may be with the cable itself.
  • To determine if the problem is between the computer and the KVM switch, using the same cables, connect the KVM switch to one computer that is working and one computer that is not working. If the issue persists when you switch computers, follows the issue may be with the computer and the KVM switch.
  • Try reinitializing the KVM.  This is done by following the setup instructions on the website.
  • To determine if the KVM switch is the source of the problem, if you have another KVM switch, disconnect the current KVM switch and connect the second KVM switch.

If the keys on your keyboard are repeating, complete the following:

  1. If the KVM you are using has USB ports, you can move your keyboard to the USB hub port on the back of the KVM (the USB hubs are marked).

Note: When you move the keyboard out of the keyboard port, you will not be able to access the hotkeys.

  1.  You can adjust the typematic rate in your operating system’s settings. Depending on the version of Windows you are running, you can adjust the typematic rate by doing one of the following:
    • Click Control Panel > Keyboard > Speed. Adjust the repeat delay and repeat rate until the keys no longer repeat.
    • Click Control Panel > Hardware and Sound > Devices and Printers. Right-click Keyboard Settings. Adjust the repeat delay and repeat rate until the keys no longer repeat.

Om uw muis goed te kunnen bewegen tussen schermen, moet u uw schermen in Windows aanpassen zodat deze overeenstemmen met de fysieke locatie van uw schermen op uw bureau. Daarvoor moet u de volgende stappen doorlopen afhankelijk van uw besturingssysteem:

Windows 10 en Windows  8

  1. Druk op uw toetsenbord op de Windows-toets + X en selecteer Configuratiescherm.
  2. Klik op Vormgeving en persoonlijke instellingen, en klik dan op Beeldscherm.
  3. Klik op de optie Resolutie of Resolutie aanpassen in de linkerkolom, waar uw beeldschermen als genummerde pictogrammen worden weergegeven.
  4. Klik op Identificeren om de nummers van elk aangesloten beeldscherm weer te geven; u ziet dan hoe het besturingssysteem de posities ervan heeft toegewezen.
  5. Klik op en versleep de beeldschermpictogrammen zodanig dat ze het best overeenkomen met uw eigen configuratie.
  6. Klik op OK om de wijzigingen toe te passen en sluit het venster.

Windows 7 en Windows Vista

  1. Klik op de knop Start en selecteer Configuratiescherm.
  2. Klik op Vormgeving en persoonlijke instellingen en klik dan op Beeldscherm.
  3. Klik op de optieResolutie of Resolutie aanpassen in de linkerkolom, waar uw beeldschermen als genummerde pictogrammen worden weergegeven.
  4. Klik op Identificeren om de nummers van elk aangesloten beeldscherm weer te geven; u ziet dan hoe het besturingssysteem de posities ervan heeft toegewezen.
  5. Klik op en versleep de beeldschermpictogrammen zodanig dat ze het best overeenkomen met uw eigen configuratie.
  6. Klik op OK om de wijzigingen toe te passen en sluit het venster.

Windows XP

  1. Klik op de knop Start en selecteer Configuratiescherm.
  2. Dubbelklik op Beeldscherm.
  3. Klik op het tabblad Instellingen, waarna uw beeldschermen als genummerde pictogrammen worden weergegeven.
  4. Klik op Identificeren om de nummers van elk aangesloten beeldscherm weer te geven; u ziet dan hoe het besturingssysteem de posities ervan heeft toegewezen.
  5. Klik op en versleep de beeldschermpictogrammen zodanig dat ze het best overeenkomen met uw eigen configuratie.
  6. Klik op OK om de wijzigingen toe te passen en sluit het venster.

Om het beeld van uw primaire beeldscherm te spiegelen in plaats van uw bureaublad uit te breiden, raadpleeg de volgende FAQ: http://www.startech.com/faq/Windows_Mirroring_Monitors

To output 4K to a DisplayPort display at 30Hz, your monitor must support the resolution and refresh rate. If your monitor also supports 4K at 60Hz (DP 1.2 or higher), you may also need to set the monitor to work at 30Hz. 

To resolve this issue, use the buttons on your monitor to change the DisplayPort settings to DP1.1. For more information about how to change your monitor settings, refer to the website of the manufacturer of your monitor.

To output 4K to a DisplayPort display at 60Hz your monitor must support the resolution and refresh rate. If your monitor supports 4K at 60Hz (DP1.2 or higher) you may also need to set the monitor to work at 60Hz.

To resolve this issue, use the buttons on your monitor to change the DisplayPort settings to DP1.2. For more information about changing your monitor settings, refer to the website of the manufacturer of your monitor.

Voor uw aanschaf

KVM stands for Keyboard Video Mouse and KVM switches allow you to switch the use of a keyboard, display and mouse between multiple computers.  KVM switches also commonly let you switch audio and USB devices between computers.

There are different types of KVM switches as well.

  • Standard box KVM switches. (e.g. SV231USB)
  • Cable KVM switches. (e.g. SV211USB)
  • Multi-Monitor KVM switches.  (e.g. SV231DDUSB)
  • IP KVM switches. (e.g. SV841HDIE)

Standard box and cable KVM switches are a simple way to switch the use of a keyboard, display, and mouse between multiple computers.  Multi-monitor KVM switches allow you to switch multiple displays between computers, and IP KVM switches allow you to remotely control the KVM switch and connected computers over a network.

Here are some important things to consider before purchasing a KVM switch.

  • How many computers do you need to control?  Purchase a KVM switch that supports the number of computers in your setup.
  • Which video connections do your computers and display(s) support?  It is best practice to use the same video connections wherever possible.
  • Will you be using a PS/2 or USB mouse and keyboard?
  • Do you need multiple monitor support?  Ensure every computer can support the number of monitors you are looking to use in your setup.
  • Do you need audio support?
  • What resolution(s) do you want your display(s) running at?  The KVM switch must support the resolution(s) you want to use.
  • Would you like hotkey support?  Some KVM switches support the use of hotkey combinations to complete tasks such as switching between computers.

There are a couple of other important things you may want to take note of:

  • Some KVM switches require proprietary cables to function.  These KVM cables may vary by each KVM switch.  For StarTech.com KVM switches that require proprietary cables, the KVM switches will either come with these cables, or they will be listed in the Accessories tab on the individual product pages.  For more information, see our video dedicated to KVM switch cables.
  • Basic mice and keyboards are recommended for use with KVM switches.  Wireless, gaming or combo mice and keyboards (mice and keyboards that use a single USB connection / receiver for both units) can cause performance issues, and in general, are not supported for use with KVM switches.

It can be difficult to tell which ones are right for the KVM switch you are interested in.  How can you tell which KVM cables you require?  How can you tell if a KVM switch requires proprietary cables?  How do these cables work? 

Standard KVM Switches and Cables

Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.

Standard KVM switches have no special cable requirements.  If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers.  StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings.  Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.

KVM Switches with Opposite Gender Video Connections

Some KVM switches use male video connections for the computers and female video connections for the console ports.  In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch.  This is so you cannot accidentally plug cables from your computer into the console ports.

KVM Switches Requiring Proprietary Cables

KVM switches can also use proprietary KVM cables to connect to the individual computers.  This is often done with larger KVM switches and KVM switches intended for a server environment.  These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.

If you are unsure whether or not you need special cables, complete the following:

  1. Check the Technical Specifications tab on the individual product pages for What's in the Box.  This section lists everything that comes with your purchase, and your KVM switch might come with the cables.
  2. Check the Accessories tab.  This section lists potential accessories for the product you are looking at.  StarTech.com will list the appropriate KVM cables for the KVM switch here. 
  3. Check the Gallery and look at a picture of the back of the KVM switch.

Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.

If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.  

Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use.  Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues.  This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards.  We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.

If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven