Productcode: SV431DPU3A2
Met deze 4-poorts USB 3.0 DisplayPort KVM-switch kunt u vier DisplayPort (DP) computers bedienen met één beeldscherm, toetsenbord en muis. De KVM heeft ook een 3,5 mm audio en een geïntegreerde 3-poorts USB 3.0 hub.
Deze KVM switch heeft een geïntegreerde 3-poorts USB 3.0 hub, los van uw HID-toetsenbord en -muis, zodat u USB randapparaten kunt delen met elke aangesloten computer en de kosten van afzonderlijke apparatuur kunt voorkomen. De USB 3.0 hub schakelt uw aangesloten USB-apparaten automatisch naar de geselecteerde computer, waardoor u de ergernis bespaart blijft van het continu loskoppelen en weer aansluiten van uw randapparaten.
Met ondersteuning van USB 3.0 kunt u dataoverdrachtsnelheden tot 5 Gbps bereiken, voor een gegarandeerd vlekkeloze prestatie van uw USB randapparaten - perfect voor de snelle overdracht van data naar externe USB 3.0 schijven.
Met ondersteuning van resoluties tot Ultra HD 4K bij 30 Hz, kan deze 4-poorts DisplayPort KVM switch gemakkelijk grote DP-schermen aansturen, een ideale oplossing dus voor grafische toepassingen die high-resolution video-ondersteuning vereisen.
De KVM switch heeft aanvullende 3,5 mm audiopoorten waarmee u onafhankelijke analoge audio kunt delen, vanaf elke aangesloten computer, met de luidsprekerset van uw desktop. Onafhankelijke audio, samen met 4K DP video, geeft u volledige multimediabediening van verschillende computers, waardoor deze KVM perfect is voor creatieve professionele applicaties zoals video- en geluidsdesign of -bewerking.
De SV431DPU3A2 wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(en) | 1 - Console-aansluiting(en) | DisplayPort (20-polig) |
4 - Hostaansluitingen | DisplayPort (20-polig) | |
1 - Console-aansluiting(en) | 3,5 mm mini-jack (3 standen) | |
4 - Hostaansluitingen | USB Type-B (9-polig) USB 3.0 | |
4 - Console-aansluiting(en) | USB Type-A (9-polig) USB 3.0 (5 Gbps) | |
3 - Andere aansluiting(en) | USB Type-A (9-polig) USB 3.0 (5 Gbps) | |
4 - Hostaansluitingen | 3,5 mm mini-jack (3 standen) | |
Fysieke eigenschappen | Lengte product | 22 cm [8,7 in] |
Breedte product | 13 cm [5,1 in] | |
Hoogte product | 43 mm [1,7 in] | |
Gewicht product | 1,1 kg [2,3 lb] | |
Gebruiksomgeving | Bedrijfstemperatuur | 0°C to 40°C (32°F to 104°F) |
Opslagtemperatuur | -10°C to 60°C (14°F to 140°F) | |
Vochtigheid | 0 - 80% rel. vochtigheid, niet-condenserend | |
Hardware | Audio | Ja |
KVM-poorten | 4 | |
Ondersteunde platforms | USB 3.0 | |
PC-videotype | DisplayPort | |
Multi-monitor | 1 | |
Rack-monteerbaar | Optioneel | |
Inclusief kabels | Nee | |
Industriestandaarden | HDCP 2.2 | |
Op elkaar aansluitbaar | Nee | |
Indicatoren | 4 - LED-indicatoren | poortselectie/link LED's |
1 - LED-indicatoren | Voeding-LED | |
Prestaties | Schermmenu & sneltoetsen | Nee |
IP-controle | Nee | |
Hot-Key Selection | Ja | |
Maximale kabellengte | 10 m [32,8 ft] | |
Maximale digitale resoluties | 3840x2160 @ 30 Hz | |
Ondersteuning breedbeeld: | Ja | |
Audiospecificaties | 2-kanaals stereo ondersteund | |
Poortselectie-ondersteuning | Knopdruk en sneltoetsen | |
MTBF | 143000 uur | |
Speciale opmerkingen / vereisten | Notitie | Over videoadapters Als u een videoadapter voor deze KVM switch gebruikt, moet u een actieve videoadapter gebruiken. Bij een passieve videoadapter kan de prestatie verminderen. Controleer bij de fabrikant om te zien of de videoadapter die u wilt gebruiken, een actieve adapter is. |
Verpakkingsinformatie | Package Height | 85 mm [3,3 in] |
Package Length | 29,7 cm [11,7 in] | |
Verzendgewicht (verpakt) | 1,6 kg [3,6 lb] | |
Package Width | 24,4 cm [9,6 in] | |
Voeding | Ingangsspanning | 100 - 240 AC |
Uitgangsspanning | 12V DC | |
Uitgangsstroom | 1.5 A | |
Stekkertype | M | |
Vermogensopname | 18 | |
Wat wordt er meegeleverd | 1 - Meegeleverd | 4-poorts DisplayPort KVM switch |
4 - Meegeleverd | Rubberen voetjes | |
1 - Meegeleverd | universele voedingsadapter (NA, EU, GB, ANZ) | |
Verkorte handleiding |
Monteer een 1U KVM-switch van de SV431-serie in uw serverrack of serverkast
Sluit uw externe apparaten aan en zet gegevens over 10x sneller dan met USB 2.0
Sluit USB 3.0 USB-A apparaten aan op een USB hub of op uw computer
Maak 4K x 2K hoge-resolutieverbindingen met HBR2-ondersteuning tussen uw DisplayPort apparaten
Maak 4K x 2K hoge-resolutieverbindingen met HBR2-ondersteuning tussen uw DisplayPort apparaten
Sluit gemakkelijk een iPod of andere MP3-speler aan op een autoradio
Connect an iPhone® or other MP3 player to a car stereo
Easily connect an iPod or other MP3 player to your stereo
Sluit een VGA-monitor aan op een PC met DisplayPort
Sluit een DVI-monitor aan op een computer met single-mode DisplayPort-uitgang
Sluit uw dual-link DVI-beeldscherm aan op een DisplayPort®-videobron voor toepassingen met hoge resolutie
Sluit een HDMI-monitor aan op een DisplayPort-videobron
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds. Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.
You can test to make sure that the following components are working correctly and are not the source of the issue:
Video cables
KVM switch
Video source (such as a DVR or computer)
Video destination (such as a monitor or projector)
Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.
To test your setup components, try the following:
Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.
To output 4K to a DisplayPort display at 30Hz, your monitor must support the resolution and refresh rate. If your monitor also supports 4K at 60Hz (DP 1.2 or higher), you may also need to set the monitor to work at 30Hz.
To resolve this issue, use the buttons on your monitor to change the DisplayPort settings to DP1.1. For more information about how to change your monitor settings, refer to the website of the manufacturer of your monitor.
KVM stands for Keyboard Video Mouse and KVM switches allow you to switch the use of a keyboard, display and mouse between multiple computers. KVM switches also commonly let you switch audio and USB devices between computers.
There are different types of KVM switches as well.
Standard box and cable KVM switches are a simple way to switch the use of a keyboard, display, and mouse between multiple computers. Multi-monitor KVM switches allow you to switch multiple displays between computers, and IP KVM switches allow you to remotely control the KVM switch and connected computers over a network.
Here are some important things to consider before purchasing a KVM switch.
There are a couple of other important things you may want to take note of:
It can be difficult to tell which ones are right for the KVM switch you are interested in. How can you tell which KVM cables you require? How can you tell if a KVM switch requires proprietary cables? How do these cables work?
Standard KVM Switches and Cables
Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.
Standard KVM switches have no special cable requirements. If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers. StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings. Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.
KVM Switches with Opposite Gender Video Connections
Some KVM switches use male video connections for the computers and female video connections for the console ports. In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch. This is so you cannot accidentally plug cables from your computer into the console ports.
KVM Switches Requiring Proprietary Cables
KVM switches can also use proprietary KVM cables to connect to the individual computers. This is often done with larger KVM switches and KVM switches intended for a server environment. These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.
If you are unsure whether or not you need special cables, complete the following:
Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.
If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.
Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use. Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues. This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards. We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.
If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.