4 poorts DisplayPort KVM switch met 4K 60Hz resolutie

DisplayPort 1.2 KVM | TAA conform| USB 2.0 Hub | 7.1 HD digitale audio

Productcode: SV431DPUA2

  • Voldoet aan de TAA-eisen voor federale aankopen (GSA Schedule)
  • Verhoog uw productiviteit met aansluitpoorten voor 4 HD multimedia computers
  • Geniet van hoogwaardige beeldkwaliteit met 4K resoluties bij 60 Hz
Uw prijs
€668,99 EUR excl. BTW
€809,48 EUR incl. BTW

Deze 4-poorts KVM switch combineert 4K (60 Hz) digitale weergavemogelijkheden met bediening van tot vier aangesloten computers.  

4K60 foto- en volledige audio-ondersteuning 

De DisplayPort KVM switch ondersteunt resoluties tot 4K bij 60 Hz, en kan gemakkelijk een groot DP scherm aansturen voor eenvoudige, maximale beeldruimte. Met ondersteuning van 7.1 HD digitale audio (met ondersteunde schermen en bronnen) en aparte 3,5 mm stereoaudio biedt de DisplayPort 1.2 KVM switch volledige audiocompatibiliteit. 

Geïntegreerde USB hub 

Met de geïntegreerde USB 2.0 hub kunt u twee extra randapparaten delen (naast toetsenbord en muis) met aangesloten computers alsof ze direct zijn aangesloten, zodat u de kosten van dubbele apparaten zoals printers en scanner elimineert. 

Compatibel met Windows en Mac 

Deze DP KVM switch ondersteunt niet alleen Windows pc's, maar ook Mac computers met behulp van een Mini DisplayPort adapter, inclusief laptops, notebooks en tablets.  

Eenvoudig te bedienen 

Met de drukknoppen op het frontpaneel kunt eenvoudig tussen systemen wisselen en de auto-scan activeren. De hotkey-functie biedt snelle toegang tot elk systeem, terwijl een bromtoon de wisseling bevestigt.  

StarTech.com biedt een breed assortiment van hoogwaardige KVM switches en -producten waarmee u efficiënter toegang krijgt tot uw systemen zonder de kosten en warboel van extra toetsenborden, muizen en schermen. De USB KVM switch wordt gedekt door een 3-jarige garantie en gratis levenslange technische ondersteuning. 

Toepassingen

  • High-resolution medische beeldvorming
  • Bediening van narrowcasting-servers met hoge resolutie
  • Multimedia design en productie

Partnernummers

  • Ingram Micro Netherlands 4127082
  • Tech Data - Netherlands 4676234
  • UPC 065030826372

Compatibility

Specificaties

Warranty Information Warranty 3 Years
Connector(en) 2 - Console-aansluiting(en) USB Type-A (4-polig) USB 2.0
3,5 mm mini-jack (3 standen)
USB Type-A (4 pin; HID Port) USB 1.1
1 - Console-aansluiting(en) DisplayPort (20-polig)
4 - Hostaansluitingen USB B (4-polig)
DisplayPort (20-polig)
8 - Hostaansluitingen 3,5 mm mini-jack (3 standen)
Fysieke eigenschappen Kleur Zwart
Type behuizing Staal
Lengte product 22,0 cm [8,7 in]
Breedte product 13,1 cm [5,2 in]
Hoogte product 4,5 cm [1,8 in]
Gewicht product 1,0 kg [2,3 lb]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 40°C (32°F to 104°F)
Opslagtemperatuur -10°C to 60°C (14°F to 140°F)
Vochtigheid 0% ~ 40%
Hardware U-hoogte 1U
Audio Ja
KVM-poorten 4
Ondersteunde platforms USB
PC-videotype DisplayPort
Multi-monitor 1
Rack-monteerbaar Optioneel
Inclusief kabels Nee
Op elkaar aansluitbaar Nee
Indicatoren 4 - LED-indicatoren Rood- selectie-indicator (1 LED per poort)
Groen - online-indicator (1 LED per poort)
1 - LED-indicatoren Power
Prestaties Schermmenu & sneltoetsen Nee
IP-controle Nee
Hot-Key Selection Ja
Maximale overdrachtsnelheid 480 Mbit/s (USB 2.0)
Maximale digitale resoluties 3840 x 2160 (Ultra HD 4K) bij 60 Hz
Ondersteuning breedbeeld: Ja
Automatisch scannen 3, 8, 15 & 30 seconden
Maximum aantal gebruikers 1
Poortselectie-ondersteuning Knopdruk en sneltoetsen
MTBF 138327 uur
Software Besturingssystemen Onafhankelijk van het besturingssysteem: Geen software of stuurprogramma's vereist
Verpakkingsinformatie Verzendgewicht (verpakt) 1,6 kg [3,5 lb]
Package Length 40,9 cm [16,1 in]
Package Width 21,2 cm [8,3 in]
Package Height 87,0 mm [3,4 in]
Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 100 - 240 AC
Ingangsstroom 0.6 A
Uitgangsspanning 12V DC
Uitgangsstroom 1.5 A
Polariteit pin midden Positief
Stekkertype M
Vermogensopname 18 W
Wat wordt er meegeleverd 1 - Meegeleverd KVM-switch
universele voedingsadapter (NA/JP, EU, VK, ANZ)
verkorte handleiding
4 - Meegeleverd zelfklevende voetjes

Accessoires

IM12D1500P

12V DC 1,5A Universele voedingsadapter

Vervang uw 12 V DC (1,5 A) voedingskabel door een betrouwbare verbinding

Uw prijs
€22,99 EUR excl. BTW
€27,82 EUR incl. BTW
SVA12M2NEUA

DC power adapter - 12V, 2A - voedingsadapter

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€25,99 EUR excl. BTW
€31,45 EUR incl. BTW
DISPLPORT6L

DisplayPort 1.2 kabel met sluitingen - gecertificeerd, 1,8 m

Maak 4K x 2K hoge-resolutieverbindingen met HBR2-ondersteuning tussen uw DisplayPort apparaten

Uw prijs
€19,99 EUR excl. BTW
€24,19 EUR incl. BTW
SVA12M5NA

DC power adapter - 12V, 5A - voedingsadapter

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€65,99 EUR excl. BTW
€79,85 EUR incl. BTW
DISPLPORT10L

3m DisplayPort 1.2 kabel met vergrendeling M/M - DP 4k kabel - zwart

Maak 4K x 2K hoge-resolutieverbindingen met HBR2-ondersteuning tussen uw DisplayPort apparaten

Uw prijs
€25,99 EUR excl. BTW
€31,45 EUR incl. BTW
Uw prijs
€2,99 EUR excl. BTW
€3,62 EUR incl. BTW
MU1MMS

1 ft Slim 3.5mm Stereo Audio Cable - M/M

Sluit een iPhone® of andere MP3-speler aan op een autoradio

Uw prijs
€3,99 EUR excl. BTW
€4,83 EUR incl. BTW
MU3MMS

90cm Slanke 3,5mm Stereo Audiokabel - M/M

Sluit gemakkelijk een iPod of andere MP3-speler aan op een autoradio

Uw prijs
€3,99 EUR excl. BTW
€4,83 EUR incl. BTW
MU6MMS

1,8 m slanke 3.5mm Stereo Audio kabel - M/M

Connect an iPhone® or other MP3 player to a car stereo

Uw prijs
€3,99 EUR excl. BTW
€4,83 EUR incl. BTW
MU10MMS

3 m slanke 3.5mm Stereo Audio kabel - M/M

3m slanke 3,5mm Stereo Aux kabel

Uw prijs
€4,99 EUR excl. BTW
€6,04 EUR incl. BTW
MU15MMS

4,5 m slanke 3.5mm Stereo Audio kabel - M/M

Easily connect an iPod or other MP3 player to your stereo

Uw prijs
€5,99 EUR excl. BTW
€7,25 EUR incl. BTW
MDP2DPMM3

3ft (1m) Mini DisplayPort to DisplayPort 1.2 Cable - 4K x 2K UHD Mini DisplayPort to DisplayPort Adapter Cable - Mini DP to DP Cable for Monitor - mDP to DP Converter Cord

Create a high-resolution 4k x 2k connection with HBR2 support between your Mini DisplayPort™-equipped laptop and a standard DP monitor

Uw prijs
€10,99 EUR excl. BTW
€13,30 EUR incl. BTW
MDP2DPMM6

1,8 m Mini DisplayPort-naar-DisplayPort 1.2 adapterkabel M/M - DisplayPort 4k

Gebruik een 4k x 2k hoge-resolutieverbinding met HBR2-ondersteuning voor de aansluiting van uw Mini DisplayPort™-laptop en een standaard DP-scherm

Uw prijs
€11,99 EUR excl. BTW
€14,51 EUR incl. BTW
MDP2DPMM10

3 m Mini DisplayPort-naar-DisplayPort 1.2 adapterkabel M/M - DisplayPort 4k

Gebruik een 4k x 2k hoge-resolutieverbinding met HBR2-ondersteuning voor de aansluiting van uw Mini DisplayPort™-laptop en een standaard DP-scherm

Uw prijs
€17,99 EUR excl. BTW
€21,77 EUR incl. BTW
SV431RACK

1U rack montagesteunen voor KVM switch (SV431-serie)

Monteer een 1U KVM-switch van de SV431-serie in uw serverrack of serverkast

Uw prijs
€43,99 EUR excl. BTW
€53,23 EUR incl. BTW
DP2VGA2

DisplayPort naar VGA Video Adapter Converter

Sluit een VGA-monitor aan op een PC met DisplayPort

Uw prijs
€28,99 EUR excl. BTW
€35,08 EUR incl. BTW
DP2DVIS

DisplayPort naar DVI Actieve Adapter

Sluit uw DVI-monitor aan op een computer met DisplayPort

Uw prijs
€40,99 EUR excl. BTW
€49,60 EUR incl. BTW
DP2DVID2

DisplayPort naar DVI dual link active video adapter / converter - DP naar DVI-D - 2560x1600

Sluit uw dual-link DVI-beeldscherm aan op een DisplayPort®-videobron voor toepassingen met hoge resolutie

Uw prijs
€177,99 EUR excl. BTW
€215,37 EUR incl. BTW
Uw prijs
€39,99 EUR excl. BTW
€48,39 EUR incl. BTW
DP2HD4K60S

DisplayPort naar HDMI adapter - UHD 4K 60Hz

Sluit uw DP-computer aan op een HDMI-scherm met deze converter die UHD-resoluties tot 4K bij 60 Hz ondersteunt

Uw prijs
€45,99 EUR excl. BTW
€55,65 EUR incl. BTW

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

  1. Turn off all of the computers and monitors that will be connected to the KVM switch.
  2. Connect the power adapter to the KVM switch.
  3. Connect the video cables from your monitors to the console video port on the KVM switch. 
  4. Turn on the monitors.
  5. Connect your keyboard and mouse to the console PS/2 or USB ports on the KVM switch.
  6. If you have not done so already, change the KVM switch to focus on port 1.
  7. Connect the video cables from PC1 to the KVM switch.
  8. Connect the PS/2 or USB cables from PC1 to the PC1 PS/2 or USB ports on the KVM switch.
  9. Turn on PC1. You should see the computer load the operating system that you are using on PC1.
  10. Make sure that the mouse and keyboard can control PC1.
  11. Repeat steps 4 to 8 for each additional computer that you want to connect to the KVM switch. Leave the computer in focus until you make sure that the mouse and keyboard can control the computer in step 8.

Troubleshooting

There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds.  Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.

You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • KVM switch

  • Video source (such as a DVR or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.

To test your setup components, try the following:

  • Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.

There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch. 

  • To determine if a specific cable is the source of the problem, switch the cables that connect the KVM switch to the computers to one working port and computer, and one port and computer that is not working. Keep the computer plugged into the same ports and only switch the cables. If the issue persists when you switch cables, the issue may be with the cable itself.
  • To determine if the problem is between the computer and the KVM switch, using the same cables, connect the KVM switch to one computer that is working and one computer that is not working. If the issue persists when you switch computers, follows the issue may be with the computer and the KVM switch.
  • Try reinitializing the KVM.  This is done by following the setup instructions on the website.
  • To determine if the KVM switch is the source of the problem, if you have another KVM switch, disconnect the current KVM switch and connect the second KVM switch.

To output 4K to a DisplayPort display at 60Hz your monitor must support the resolution and refresh rate. If your monitor supports 4K at 60Hz (DP1.2 or higher) you may also need to set the monitor to work at 60Hz.

To resolve this issue, use the buttons on your monitor to change the DisplayPort settings to DP1.2. For more information about changing your monitor settings, refer to the website of the manufacturer of your monitor.

Voor uw aanschaf

KVM stands for Keyboard Video Mouse and KVM switches allow you to switch the use of a keyboard, display and mouse between multiple computers.  KVM switches also commonly let you switch audio and USB devices between computers.

There are different types of KVM switches as well.

  • Standard box KVM switches. (e.g. SV231USB)
  • Cable KVM switches. (e.g. SV211USB)
  • Multi-Monitor KVM switches.  (e.g. SV231DDUSB)
  • IP KVM switches. (e.g. SV841HDIE)

Standard box and cable KVM switches are a simple way to switch the use of a keyboard, display, and mouse between multiple computers.  Multi-monitor KVM switches allow you to switch multiple displays between computers, and IP KVM switches allow you to remotely control the KVM switch and connected computers over a network.

Here are some important things to consider before purchasing a KVM switch.

  • How many computers do you need to control?  Purchase a KVM switch that supports the number of computers in your setup.
  • Which video connections do your computers and display(s) support?  It is best practice to use the same video connections wherever possible.
  • Will you be using a PS/2 or USB mouse and keyboard?
  • Do you need multiple monitor support?  Ensure every computer can support the number of monitors you are looking to use in your setup.
  • Do you need audio support?
  • What resolution(s) do you want your display(s) running at?  The KVM switch must support the resolution(s) you want to use.
  • Would you like hotkey support?  Some KVM switches support the use of hotkey combinations to complete tasks such as switching between computers.

There are a couple of other important things you may want to take note of:

  • Some KVM switches require proprietary cables to function.  These KVM cables may vary by each KVM switch.  For StarTech.com KVM switches that require proprietary cables, the KVM switches will either come with these cables, or they will be listed in the Accessories tab on the individual product pages.  For more information, see our video dedicated to KVM switch cables.
  • Basic mice and keyboards are recommended for use with KVM switches.  Wireless, gaming or combo mice and keyboards (mice and keyboards that use a single USB connection / receiver for both units) can cause performance issues, and in general, are not supported for use with KVM switches.

It can be difficult to tell which ones are right for the KVM switch you are interested in.  How can you tell which KVM cables you require?  How can you tell if a KVM switch requires proprietary cables?  How do these cables work? 

Standard KVM Switches and Cables

Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.

Standard KVM switches have no special cable requirements.  If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers.  StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings.  Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.

KVM Switches with Opposite Gender Video Connections

Some KVM switches use male video connections for the computers and female video connections for the console ports.  In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch.  This is so you cannot accidentally plug cables from your computer into the console ports.

KVM Switches Requiring Proprietary Cables

KVM switches can also use proprietary KVM cables to connect to the individual computers.  This is often done with larger KVM switches and KVM switches intended for a server environment.  These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.

If you are unsure whether or not you need special cables, complete the following:

  1. Check the Technical Specifications tab on the individual product pages for What's in the Box.  This section lists everything that comes with your purchase, and your KVM switch might come with the cables.
  2. Check the Accessories tab.  This section lists potential accessories for the product you are looking at.  StarTech.com will list the appropriate KVM cables for the KVM switch here. 
  3. Check the Gallery and look at a picture of the back of the KVM switch.

Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.

If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.  

Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use.  Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues.  This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards.  We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.

If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven