StarTech.com

M.2 naar SATA SSD behuizing - USB 3.1 (10Gbps) met USB-C kabel - externe behuizing

Verander uw M.2 SATA-schijf in een ultrasnelle, ultramobiele opslagoplossing voor USB-C apparaten

Productcode: SM21BMU31C3

  • Benut uw SATA M.2 SSD om snelle externe opslag toe te voegen aan uw met USB-C uitgevoerde host (inclusief USB-C-kabel)
  • Ondersteunt USB 3.1 Gen 2 (10 Gbps)
  • Compatibel met Thunderbolt 3 USB-C poort
Bekijk meer
  • Solide aluminiumbehuizing met ventilatie voor optimale warmteafvoer
  • Brede compatibiliteit met ondersteuning van de meest gebruikelijke M.2 SATA SSD's (30 mm, 42 mm, 60 mm, 80 mm)
  • Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
  • Ondersteunt SATA I/II/III (1,5, 3, 6 Gbps)
45,99 € EUR exc BTW
55,65 € EUR inc BTW

Overzicht

Met deze compacte M.2 SATA SSD-behuizing kunt u hoogwaardige dataopslag toevoegen aan elke laptop of computer met een USB-C™ poort - zoals MacBook, Chromebook Pixel™, Dell™ XPS laptops en nog vele andere. Deze behuizing verandert uw SATA M.2-schijf in een zeer snelle opslagoplossing via een USB 3.1 Gen 2-verbinding, bij een throughput tot 10 Gbps.

Een echt draagbare oplossing

Deze slanke behuizing in zakformaat voor M.2 NGFF SATA SSD's is speciaal ontworpen voor mobiliteit, met een kleine-vormfactor ontwerp dat gemakkelijk in elke laptoptas past. De lichtgewicht, maar duurzame aluminium behuizing zorgt ervoor dat uw schijf onderweg niet wordt beschadigd.

Ventilatiegaten helpen bij de warmteafvoer en zorgen voor een optimale bedrijfstemperatuur.

De ventilatiegaten helpen bij de warmteafvoer en zorgen voor een optimale bedrijfstemperatuur

Maximaliseer de prestatie van uw M.2 SATA SSD

Benut de snelheid van uw M.2 NGFF SATA-schijf met deze externe behuizing. Hij biedt USB 3.1 Gen 2 dataoverdrachtsnelheden tot 10 Gbps en ondersteunt UASP, zodat u hogere overdrachtsnelheden kunt bereiken bij aansluiting op een voor UASP geschikte hostcomputer.

De behuizing is geschikt voor tablets, laptops en desktopcomputers en is compatibel met hostcomputers die zijn uitgerust met Thunderbolt 3 USB-C poorten.

Brede compatibiliteit

De behuizing is compatibel met alle gebruikelijke M.2 SATA SSD's en biedt u de mogelijkheid schijven van verschillende lengte te monteren, inclusief: 30 mm (2230), 42 mm (2242), 60 mm (2260) en 80 mm (2280).

De SM21BMU31C3 wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

Mobiele professionals kunnen hun M.2 SATA SSD gebruiken voor snelle datatoegang op hun met USB-C uitgevoerde laptop of computer

Zet uw M.2 SATA SSD om in een USB 3.1 Gen 2 externe schijf

Draag bestanden sneller over door middel van een high-performance SATA M.2 SSD als uw externe schijf

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Aantal stations 1
Bus type USB 3.1 Gen 2
Chipsetcode ASMedia - ASM1351
Interface USB 3.1 Gen 2
Schijfinstallatie Vast
Schijftype M.2 SATA (NGFF, B-Key)
M.2 SATA (NGFF, B+M-Key)
Prestaties
4Kn Support Ja
Algemene specificaties Niet compatibel met PCI-Express M.2 SSD's
Maximale overdrachtsnelheid 10 Gbps
MTBF 1.000.000 uren
TRIM Support Ja
Type en snelheid USB 3.1 Gen 2 - 10 Gbit/s
SATA III (6 Gbps)
UASP ondersteuning Ja
Connector(en)
Hostaansluitingen 1 - USB 3.1 USB Type Micro-B (10-polig, Gen 2, 10 Gbps) Vrouwelijk
Schijfaansluitingen 1 - M.2 SATA (NGFF, B-Key) Contact
Software
Besturingssystemen OS independent; No software or drivers required
Indicatoren
LED-indicatoren 1 - Voeding & activiteit
Voeding
Inclusief voedingsadapter Gevoed via USB
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 40°C (32°F to 104°F)
Opslagtemperatuur -10°C to 65°C (14°F to 149°F)
Vochtigheid Vochtigheid tijdens gebruik: 10% ~ 90% RV
Vochtigheid tijdens opslag: 5% ~ 95% RV
Fysieke eigenschappen
Breedte product 42 mm [1.7 in]
Gewicht product 48 g [1.7 oz]
Hoogte product 13 mm [0.5 in]
Kleur Zwart & Zilver
Lengte product 99 mm [3.9 in]
Max. schijfhoogte 80 mm [3.1 in]
Type behuizing Aluminium
Verpakkingsinformatie
Verzendgewicht (verpakt) 132 g [4.7 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - M.2 NGFF SATA-behuizing - USB 3.1
1 - USB-C naar Micro B kabel - 46 cm
1 - M.2-schroevenset
1 - Schroevendraaier
1 - Verkorte handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
OS independent; No software or drivers required

Certificaties

Verwante producten

USB 3.1 (10 Gbps) behuizing voor 2,5 inch SATA-schijven
S251BMU313
USB 3.1 (10 Gbps) behuizing voor 2,5 inch SATA-schijven

Bereid u voor op ultrasnelle USB 3.1 Gen 2 dataopslag met uw 2,5 inch SSD of HDD

43,99 € exc BTW
53,23 € inc BTW
USB 3.1 (10 Gbps) gereedschapsloze behuizing voor 2,5 inch SATA-schijven
S251BPU313
USB 3.1 (10 Gbps) gereedschapsloze behuizing voor 2,5 inch SATA-schijven

Benut de hogere snelheid van USB 3.1 Gen 2 in een lichte en draagbare opslagoplossing

36,99 € exc BTW
44,76 € inc BTW
SATA-naar-mSATA SSD-adapter met full-profile and low-profile steunen – SATA-naar-Mini SATA-converterkaart
SAT32MSATPEX
SATA-naar-mSATA SSD-adapter met full-profile and low-profile steunen – SATA-naar-Mini SATA-converterkaart

Monteer een mSATA SSD op uw standaard of kleine-vormfactordesktopcomputer met een standaard SATA-hostverbinding

30,99 € exc BTW
37,50 € inc BTW
M.2 naar SATA externe SSD-behuizing - USB 3.0 met UASP - externe behuizing
SM2NGFFMBU33
M.2 naar SATA externe SSD-behuizing - USB 3.0 met UASP - externe behuizing

Verander uw solid state drive in een zeer mobiele pocketschijf

39,99 € exc BTW
48,39 € inc BTW
4x M.2 SATA monteerbare adapter voor 3,5 inch drive bay
35S24M2NGFF
4x M.2 SATA monteerbare adapter voor 3,5 inch drive bay

Verbeter uw systeem door vier M.2 SATA SSD's in één 3,5 inch drive bay te monteren

65,99 € exc BTW
79,85 € inc BTW
M.2 SSD naar 2,5 inch SATA III-adapter - Solid-State Drive Converter met beschermende behuizing
SAT2M2NGFF25
M.2 SSD naar 2,5 inch SATA III-adapter - Solid-State Drive Converter met beschermende behuizing

Verander een M.2 solid state drive in een standaard 2,5 inch 6 Gbps vormfactor-SSD

34,99 € exc BTW
42,34 € inc BTW
M.2 naar SATA SSD-adapter – in uitbreidingssleuf gemonteerd
S32M2NGFFPEX
M.2 naar SATA SSD-adapter – in uitbreidingssleuf gemonteerd

Monteer een M.2 NGFF SSD in uw desktop computer met een standaard SATA-hostverbinding

24,99 € exc BTW
30,24 € inc BTW
2,5in aluminium USB 3.0 externe SATA III SSD harde-schijfbehuizing met UASP voor SATA 6 Gbps – draagbare externe HDD
S2510BMU33
2,5in aluminium USB 3.0 externe SATA III SSD harde-schijfbehuizing met UASP voor SATA 6 Gbps – draagbare externe HDD

Verander een 2,5 inch SATA harde schijf of solid-state drive in een door UASP ondersteunde USB 3.0 externe harde schijf

28,99 € exc BTW
35,08 € inc BTW
2,5 inch USB 3.0 externe SATA III SSD harde-schijfbehuizing met UASP - draagbare externe HDD
S2510BPU33
2,5 inch USB 3.0 externe SATA III SSD harde-schijfbehuizing met UASP - draagbare externe HDD

Verander een 2,5 inch SATA harde schijf of solid-state drive in een door UASP ondersteunde USB 3.0 externe harde schijf

27,99 € exc BTW
33,87 € inc BTW

Accessoires

Productondersteuning

Veelgestelde vragen (FAQ)

Voor uw aanschaf

Although M.2 SSDs come in similar form factors, only an M.2 SATA drive with an NGFF B key will operate with this device. M.2 drives that are PCIe or have a different key position are not compatible with this device.

This device can adapt an M.2 SATA drive to standard SATA connections, which is not possible for a PCIe based M.2 drive. The key type refers to the connector type on the M.2 SATA drive. B key can be M.2 PCIe x2 or SATA, so it is important that you check the specifications of the drive to see if it supports SATA.

To determine if your hard drive will work in this enclosure, on the product page, click the Technical Specifications tab, and do the following:

  • Make sure that the enclosure supports the storage size of your hard drive. If the storage size of your hard drive is larger than what the enclosure was tested with, the hard drive will likely still work with the enclosure.
  • Confirm that your hard drive uses the same interface type as the enclosure. For example, IDE, SATA, or M.2.
  • Make sure that the enclosure supports the physical size of your hard drive, such as 2.5 inches or 3.5 inches.
  • Make sure that the enclosure supports the height of your hard drive. For example, 9 mm or 15 mm.
  • Verify that the power consumption of your hard drive doesn’t exceed the power output of the enclosure. If you’re using multiple hard drives, make sure that the combined power consumption of all of the hard drives doesn’t exceed the power output of the enclosure.

USB 3.1 is the most recent version of the USB (Universal Serial Bus) standard for connecting computers and electronic devices. It is capable of data transfer speeds up to 10Gbps, and while it can use the USB-C connector type, it can also use a variety of other connector types. To achieve USB 3.1 transfer speeds, your USB host connection, cables, and device must all support USB 3.1. USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). 

USB 3.0 is capable of data transfer speeds up to 5Gbps. USB 3.0 is also known as USB 3.1 Gen 1 (5Gbps).

USB 3.1 is backwards compatible with USB 3.0 and USB 2.0, except in the following scenarios:

  • USB-B 3.1 cables are not compatible with USB-B 2.0 ports.
  • Unless you use an adapter, USB-C ports or cables will not work with USB-A or USB-B ports or cables.
  • Devices that require USB 3.1 transfer speeds of 10Gbps might not work with USB 3.0 or USB 2.0, or you might experience lower transfer speeds and impacted performance.
  • Bus-powered USB devices that requires more power than what USB 2.0 can provide are not compatible with USB 2.0.

To transfer data at speeds of 10Gbps, you need to confirm that the following components in your setup support USB 3.1:

  • The USB host connection
  • The USB cable
  • The USB device and any subcomponents (for example, a hard drive docking station and the hard drives in the docking station)

Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.

The included USB cable for this USB 3.1 Gen 2 device has been tested and verified to perform at USB 3.1 Gen 2 speeds of 10Gbps.

USB-C is a type of USB connector that is capable of supporting the following:

  • Data transfer speeds up to 10Gbps, if you use USB 3.1.
  • Bi-directional power delivery up to 100W, if both the USB host connection and the device support it.
  • Alternate modes, which deliver different types of data at different speeds. For example, DisplayPort Alternate Mode (DP Alt Mode).

If using Thunderbolt 3 over USB-C, the connection is capable of additional features. For example, Thunderbolt 3 is capable of 40Gbps of total bandwidth. For more information, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-port-capabilities.

Not all USB-C ports or devices are capable of supporting all of the features listed above, or all of the features at the maximum capabilities. If you require a specific USB-C feature, your USB host connection, cables, and device must all support the feature that you require. For more information about whether your components support specific USB-C features, refer to the information provided by the manufacturers. 

Hoe gaat u te werk

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

When you troubleshoot issues with a hard drive enclosure, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Cables
  • Hard drives
  • Hard drive enclosure

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive enclosure in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive enclosure in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive enclosure, it is recommended that you do the following:

  • To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.
  • If the hard drive is listed with unallocated space, the hard drive needs to be reformatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.​

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.​

  • If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

If your setup components support USB 3.1 but you are experiencing slower transfer speeds than you expected, consider the following:

  • A USB host connection with multiple USB 3.1 ports might not be able to support 10Gbps on each port simultaneously.
  • The type of port on a device does not determine whether the device is capable of USB 3.1 speeds. A USB-C port might not support USB 3.1 speeds, while USB-A and USB-B ports might support USB 3.1 speeds.
  • Any other devices that you include in your setup, such as an older hard drive in a USB 3.1 enclosure, might create a point of congestion and slow down transfer speeds.

To confirm the functionality of your USB host connection, its ports, and any other devices in your setup, refer to the information provided by the manufacturer.

Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.

You should not upgrade your device's firmware if you do not have any issues with the functionality of your device. The only time you should consider an upgrade is if you are experiencing a problem with the device, and you have confirmed that the firmware addresses this problem.  You can confirm this is the case by reviewing the documentation included with the firmware or from consulting with our Technical Support team. Incorrectly upgrading firmware can result in diminished performance so it is best to contact StarTech.com if you would like to perform this operation.