StarTech.com

Mini PCI Express Gigabit Ethernet Netwerk adapter kaart

Voeg een Gigabit RJ45-poort toe via een Mini PCI Express-slot

Productcode: ST1000SMPEX

  • Een enkele RJ45 Ethernet-poort met 10/100/1000 Mbit/s
  • Voldoet volledig aan de IEEE 802.3, 802.3u en 802.3ab-specificaties voor verbindingen met 10/100/1000 Mbit/s
  • Ondersteunt jumbo-frames tot 9 kB
Bekijk meer
  • Crossover-detectie en automatische aanpassing (Auto MDI/MDI-X)
  • Transparant voor IEEE 802.1Q VLAN-tagging
  • Ondersteunt Wake-on-LAN (WOL), Remote Wake-up en Pair Swap/Polarity/Skew Correction
  • Ondersteunt Microsoft® NDIS5 Checksum Offload (IPv4, TCP, UDP) en Large Send Offload
  • Ondersteunt full/half duplex-functionaliteit
  • Ondersteunt full-duplex flow-control (IEEE 802.3x)
  • Voldoet aan de PCI Express Mini Card-specificaties 1.1
  • Inclusief low-profile en standaard montagebrackets
58,99 € EUR exc BTW
71,38 € EUR inc BTW
Niet beschikbaar
Eventueel op voorraad bij partners
Waar te verkrijgen

Bezoek vandaag nog onze Europese online winkel voor meer producten zoals deze!

Overzicht

De ST1000SMPEX Mini PCI Express Gigabit Netwerkadapter/kaart voegt Gigabit-netwerkconnectiviteit toe aan een computersysteem met Mini PCI Express, zoals die op basis van Mini-ITX-moederborden. Deze Mini PCI Express Gigabit-adapter is geschikt voor gebruik in allerlei scenario’s en ondersteunt functies als NDIS5-checksum en large-send-offload voor een lager CPU-gebruik, Wake-on-LAN (WOL) en Remote Wake-up energiebeheer, jumbo-frames en VLAN-tagging. Deze hoogwaardige Mini PCI-E netwerkadapter is ideaal voor compacte of geïntegreerde systemen die niet beschikken over Gigabit-netwerkfunctionaliteit of voor het toevoegen van een netwerkverbinding zonder een hele PCI Express-slot in beslag te nemen. De kaart wordt geleverd met een low-profile / half-height bracket voor extra installatiemogelijkheden. Met 2 jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

StarTech.com Voordeel

  • Standaard Mini PCi Express vormfactor past in vele Mini-ITX of geïntegreerde systemen
  • Gebruik minder systeembronnen met ingebouwde NDIS5-checksum , Large Send Offload en Jumbo Frames
  • Met 2 jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Toepassingen

Voeg een Gigabit-netwerkpoort toe aan een compact Mini-ITX-systeem met Mini PCI Express-slot

Voeg een Gigabit-netwerkpoort toe aan een Mini-ITX-systeem via Mini PCI-E in plaats van er een hele PCI-E-slot voor in beslag te nemen

Vervanging voor een defecte ingebouwde Gigabit Ethernet-poort

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type Mini PCI Express
Chipsetcode Realtek - RTL8111E
Industriestandaarden IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Interface RJ45 (gigabit Ethernet)
Kaarttype Geïntegreerd
Poorten 1
Prestaties
Auto MDIX Ja
Compatibele netwerken 10/100/1000 Mbps
Full duplex ondersteuning Ja
MTBF 482765 Hours
Promiscuous Mode Ja
Connector(en)
Externe poorten 1 - RJ-45 Vrouwelijk
Type connector(en) 1 - Mini PCI Express x1 (52-polig) Mannelijk
Software
Besturingssystemen Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.4.x and 10.5.x
Linux 2.4.x to 4.11.x LTS Versions Only
Speciale opmerkingen / vereisten
Systeem- en kabelvereisten Vrije mini PCI Express-slot en uitbreidingsslot
Indicatoren
LED-indicatoren 1 - Activiteit
1 - Verbinding
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 55°C (32°F to 131°F)
Opslagtemperatuur -20°C to 85°C (-4°F to 185°F)
Vochtigheid 5% - 95% rel. luchtvochtigheid
Fysieke eigenschappen
Breedte product 30 mm [1.2 in]
Gewicht product 6 g [0.2 oz]
Hoogte product 8 mm [0.3 in]
Lengte product 51 mm [2 in]
Verpakkingsinformatie
Verpakkingsaantal 1
Verzendgewicht (verpakt) 150 g [5.3 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - Mini PCI-E-kaart
1 - RJ45-dochterbord
1 - Low-profile bracket
1 - Driver-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.4.x and 10.5.x
Linux 2.4.x to 4.11.x LTS Versions Only

Certificaties

Verwante producten

1-poort PCI 10/100/1000 32-bit Gigabit Ethernet Netwerk-adapterkaart
ST1000BT32
1-poort PCI 10/100/1000 32-bit Gigabit Ethernet Netwerk-adapterkaart

Voeg een 10/100/1000 Mbit/s Ethernet-poort toe aan een pc via een PCI-slot

15,99 € exc BTW
19,35 € inc BTW
1-poort Low Profile PCI 10/100 Mbit/s Ethernet Netwerk-adapterkaart
ST100SLP
1-poort Low Profile PCI 10/100 Mbit/s Ethernet Netwerk-adapterkaart

Voeg een 10/100 Mbit/s Ethernet-poort toe aan een low profile pc via een PCI-slot

12,99 € exc BTW
15,72 € inc BTW
ExpressCard Ethernet Adapter Card for Gigabit Networks
EC1000S
1-Poort ExpressCard Gigabit Laptop Ethernet Netwerkkaart Adapter

Voeg Gigabit-netwerkconnectiviteit toe aan iedere laptop of desktopcomputer met ExpressCard

58,99 € exc BTW
71,38 € inc BTW
Twee-poort ExpressCard Gigabit Laptop Ethernet Netwerkkaart Adapter
EC2000S
Twee-poort ExpressCard Gigabit Laptop Ethernet Netwerkkaart Adapter

Voeg 2 Gigabit Ethernet-poorten toe aan uw laptop via een enkele ExpressCard-slot

203,99 € exc BTW
246,83 € inc BTW
100 Mbit/s PCI Multi-Mode ST Glasvezel Ethernet Netwerkkaart 2km
PCI100MMST
100 Mbit/s PCI Multi-Mode ST Glasvezel Ethernet Netwerkkaart 2km

Sluit een pc rechtstreeks aan op een multi-mode ST glasvezelnetwerk via een beschikbare PCI-slot

117,99 € exc BTW
142,77 € inc BTW

Accessoires

Productondersteuning

Drivers en downloads

Drivers:
Handleiding:
Specificatieblad(en)

Veelgestelde vragen (FAQ)

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

The drivers on our website include a Realtek Diagnostic Toolkit that you can use to easily set up a VLAN tag.

Make sure that you are logged in as the local administrator before continuing.

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Downloads). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the Realtek_PCI_GbE.zip file or the Realtek_PCIe_GbE.zip file.
  2. Select Extract All and note the location that the files will be extracted to.
  3. Select Extract. The extracted files will open automatically.
  4. In the list of extracted files, do one of the following:
  • If you are running Windows Vista/7/8, right-click the Setup.exe file and select Run as Administrator.
  • If you are running Windows XP, double-click the Setup.exe file.
  1. Follow the on-screen instructions to install the software.
  2. Open the software and under the VLAN settings, you can add, delete, or modify the VID (VLAN ID).

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your expansion card, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.