StarTech.com

USB 3.0 naar gigabit ethernet netwerk adapter met ingebouwde 2-poorts USB hub

Voeg gigabit Ethernet-verbindingen en twee USB 3.0 poorten toe aan uw laptop of tablet via één USB-poort

Productcode: USB31000S2H

  • Krijg volledige gigabit bandbreedteondersteuning voor uw laptop of tablet via een USB 3.0 hostverbinding
  • Sluit extra randapparaten aan met twee USB 3.0 poorten
  • Native stuurprogramma ondersteuning (Windows, Mac en Chrome OS)
Bekijk meer
  • Biedt vaste netwerktoegang met een 10/100/1000 RJ45 Ethernet-poort die volledig voldoet aan IEEE 802.3i/u/ab standaards
  • Realtek RTL8153 chipset garandeert betrouwbare prestaties
  • USB-voeding voor gemakkelijke mobiliteit
  • Ondersteunt Wake-on-LAN
  • Tot 9K Jumbo Frame ondersteuning
  • Ondersteunt Auto MDIX
  • Full-duplex flow control ondersteuning
  • Ondersteunt IEEE 802.1Q VLAN-tagging
  • IEEE 802.3az Energy-Efficient Ethernet ondersteuning
52,99 € EUR exc BTW
64,12 € EUR inc BTW
Niet beschikbaar
Eventueel op voorraad bij partners
Waar te verkrijgen

Bezoek vandaag nog onze Europese online winkel voor meer producten zoals deze!

Overzicht

Voeg krachtige netwerktoegang toe aan uw tablet, Ultrabook™ of laptop, zelfs als deze geen geïntegreerde RJ45-poort heeft. Deze USB 3.0 naar gigabit netwerkadapter geeft u vaste netwerktoegang - en biedt twee USB 3.0 passthrough poorten, waardoor u extra USB-apparaten kunt aansluiten.

Krachtige gigabit netwerkverbindingen

Ideaal voor gebruik op kantoor of thuis, ondersteunt de USB 3.0 netwerkadapter de volledige gigabit bandbreedte door de snelheid van USB 3.0 (5 Gbps) te benutten. U hebt snel toegang tot zeer grote bestanden via een gigabit netwerk, waardoor u elke dag weer waardevolle tijd bespaart.

Eenvoudige installatie dankzij native stuurprogrammaondersteuning

Gebruiksklaar in een mum van tijd. Steek deze Ethernet-kabeladapter gewoon in de USB-poort van uw laptop en maak verbinding met uw netwerk. De netwerkadapter-chipset biedt native stuurprogramma ondersteuning, zodat u zich geen zorgen meer hoeft te maken over het installeren van extra software.

Sluit uw USB-apparaten aan op de extra poorten

Verbeter de mogelijkheden van uw laptop of tablet door aansluiting van USB-apparaten zoals printers of externe solid-state drive- of harde-schijfbehuizingen via de twee USB 3.0 poorten. U kunt ook uw muis, toetsenbord, flashdrive of andere laagvermogen USB-apparaten aansluiten, zonder dat extra vermogen vereist is.

Compact en lichtgewicht voor perfecte mobiliteit

Deze compacte en draagbare USB gigabit netwerkadapter is de ideale desktop netwerkadapter of laptopaccessoire. U hoeft geen voedingsadapter meer mee te nemen om de adapter te gebruiken, omdat deze adapter direct vanaf de USB-hostpoort wordt gevoed.

De USB31000S2H wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

Ideaal voor een Ultrabook, tablet of slanke laptop die geen RJ45-poort heeft

De ideale vervanging voor een oudere LAN-poort

Sluit randapparaten zoals printers of externe SSD-/HDD-behuizingen aan op de geïntegreerde 2-poorts USB hub

Neem de adapter mee met uw laptop als een draagbare acessoire met USB-voeding

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type USB 3.0
Chipsetcode Realtek - RTL8153
Industriestandaarden IEEE 802.3 10BASE-T, IEEE 802.3ab 1000BASE-T, IEEE 802.3u 100BASE-TX en IEEE 802.3X full-duplex
Interface USB 3.0
Poorten 1
USB pass-through Ja
Prestaties
Auto MDIX Ja
Compatibele netwerken 10/100/1000 Mbps
Full duplex ondersteuning Ja
Jumbo Frame Support 9K max.
Maximale overdrachtsnelheid 5 Gbps - USB 3.0 / 2 Gbps - Full-duplex gigabit Ethernet
Overspanningsbeveiliging 5 kV
Type en snelheid USB 3.0 - 5 Gbit/s
Connector(en)
Type connector(en) 1 - USB Type-A (9-polig) USB 3.0 Mannelijk
1 - RJ-45 Vrouwelijk
2 - USB Type-A (9-polig) USB 3.0 Vrouwelijk
Software
Besturingssystemen Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Mac OS X® 10.7 to 10.13 VLAN tagging is currently not supported in Mac OS
Linux Kernel 2.6.25 to 4.11.x LTS Versions only
Voeding
Vermogensopname Max 1092mA
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 70°C (32°F to 158°F)
Opslagtemperatuur -10°C to 55°C (14°F to 131°F)
Vochtigheid 40% ~ 50%
Fysieke eigenschappen
Breedte product 37 mm [1.5 in]
Form Factor Aangesloten kabel
Gewicht product 44 g [1.6 oz]
Hoogte product 17 mm [0.7 in]
Kleur Zwart
Lengte product 255 mm [10 in]
Type behuizing Kunststof
Verpakkingsinformatie
Verzendgewicht (verpakt) 106 g [3.7 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - USB 3.0 naar gigabit netwerkadapter
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Mac OS X® 10.7 to 10.13 VLAN tagging is currently not supported in Mac OS
Linux Kernel 2.6.25 to 4.11.x LTS Versions only

Certificaties

Verwante producten

USB 3.0 naar gigabit Ethernet NIC netwerkadapter - wit
USB31000SW
USB 3.0 naar gigabit Ethernet NIC netwerkadapter - wit

Voeg Gigabit Ethernet-netwerkconnectiviteit toe aan een laptop of pc via een USB 3.0-poort

32,99 € exc BTW
39,92 € inc BTW
USB 3.0-naar-gigabit Ethernet NIC netwerkadapter – 10/100/1000 Mbps
USB31000NDS
USB 3.0-naar-gigabit Ethernet NIC netwerkadapter – 10/100/1000 Mbps

Voeg Gigabit Ethernet-netwerkconnectiviteit toe aan een laptop of pc via een USB 3.0-poort

31,99 € exc BTW
38,71 € inc BTW
6-poort USB 3.0/2.0 Combo Hub met Oplaadpoort
ST7320USBC
6-poort USB 3.0/2.0 Combo Hub met Oplaadpoort

Voeg 2x USB 3.0 en 4x USB 2.0 poorten toe aan een computer, extern via een enkele USB 3.0-aansluiting

53,99 € exc BTW
65,33 € inc BTW
USB 3.0 naar gigabit Ethernet NIC netwerkadapter met 3-poorts hub - wit
ST3300U3S
USB 3.0 naar gigabit Ethernet NIC netwerkadapter met 3-poorts hub - wit

Voeg gigabit Ethernet-verbinding en 3 USB 3.0-hubpoorten toe aan een computer via één SuperSpeed USB 3.0-poort

69,99 € exc BTW
84,69 € inc BTW
USB 3.0 naar Gigabit Ethernet Netwerkadapter
USB31000S
USB 3.0 naar Gigabit Ethernet Netwerkadapter

Voeg Gigabit Ethernet-netwerkconnectiviteit toe aan een laptop of pc via een USB 3.0-poort

32,99 € exc BTW
39,92 € inc BTW
USB 3.0 naar 2-poorts gigabit Ethernet-adapter NIC met USB-poort
USB32000SPT
USB 3.0 naar 2-poorts gigabit Ethernet-adapter NIC met USB-poort

Voeg twee gigabit Ethernet-poorten en een USB 3.0 pass-through-poort toe aan uw laptop via één USB 3.0 poort

77,99 € exc BTW
94,37 € inc BTW
USB 3.0 naar gigabit ethernet netwerkadapter - zilver
USB31000SA
USB 3.0 naar gigabit ethernet netwerkadapter - zilver

Voeg een gigabit Ethernet-poort toe aan uw MacBook, Chromebook of tablet

38,99 € exc BTW
47,18 € inc BTW

Accessoires

Productondersteuning

Drivers en downloads

Drivers:
Specificatieblad(en)

Veelgestelde vragen (FAQ)

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.