StarTech.com

USB 2.0 naar 10/100 Mbps Ethernet netwerkadapter

Voeg een 10/100 Mbps Ethernet-poort toe aan uw laptop of desktop via USB

Productcode: USB2100

  • 10/100 Mbps Ethernet via USB 2.0
  • Compatibel met IEEE 802.3i en 802.3u (10BASE-T, 100BASE-TX)
  • Ondersteunt half- / full-duplex communicatie
Bekijk meer
  • Crossover-detectie en automatische aanpassing (Auto MDI-X)
  • Transparant voor IEEE 802.1Q VLAN-tagging
  • Dongle met geïntegreerde USB-kabel
22,99 € EUR exc BTW
27,82 € EUR inc BTW
Niet beschikbaar
Eventueel op voorraad bij partners
Waar te verkrijgen

Bezoek vandaag nog onze Europese online winkel voor meer producten zoals deze!

Overzicht

Met de USB2100 USB 2.0 naar 10/100 Mbps netwerkadapter kunt u een Fast Ethernet-poort via USB aan uw laptop of desktop toevoegen.

Deze compacte USB-netwerkadapter heeft een dongle design met ingebouwde kabel om krappe aansluitingen te voorkomen, waardoor het een perfecte oplossing is voor het toevoegen van een vaste Ethernet-aansluiting aan uw desktop zonder de behuizing te moeten openen, of ter vervanging van een defecte geïntegreerde netwerkadapter van uw laptop.

Met zowel half- als full-duplex communicatie ondersteunt deze USB 2.0 Ethernet-adapter datatransmissiesnelheden tot 200 Mbps. De adapter ondersteunt ook functies zoals Wake-on-LAN (WoL) en VLAN tagging voor extra flexibiliteit.

Gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

StarTech.com Voordeel

  • Voorkom een warboel van aansluitingen met de geïntegreerde USB-kabel
  • Neem de adapter overal mee dankzij een draagbaar design met USB-voeding

Toepassingen

Voeg een 10/100 Mbps Ethernet-poort toe aan elke desktop of laptop zonder de behuizing te openen

Vervanging voor een defecte geïntegreerde Ethernet-poort van een desktop of laptop

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type USB 2.0
Chipsetcode ASIX - AX88772C
Industriestandaarden IEEE802.3i, IEEE 802.3u
Interface RJ45 (10/100 Ethernet)
Poorten 1
USB pass-through Nee
Prestaties
Auto MDIX Ja
Compatibele netwerken 10/100 Mbps
Full duplex ondersteuning Ja
Max. afstand 100 m / 330 ft
Maximale overdrachtsnelheid 200 Mbps (Ethernet - full-duplex)
MTBF 76,600 hours
Type en snelheid USB 2.0 - 480 Mbit/s
Connector(en)
Type connector(en) 1 - USB Type-A (4-polig) USB 2.0 Mannelijk
1 - RJ-45 Vrouwelijk
Software
Besturingssystemen Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Mac OS X® 10.6 to 10.13
Google Chrome OS™
Linux 2.6.x to 4.11.x LTS Versions only
Speciale opmerkingen / vereisten
Systeem- en kabelvereisten Vrije USB-poort
Indicatoren
LED-indicatoren 1 - Verbinding
1 - Activiteit
Voeding
Inclusief voedingsadapter Gevoed via USB
Gebruiksomgeving
Bedrijfstemperatuur 10°C to 40°C (50°F to 114°F)
Opslagtemperatuur -20°C to 70°C (-4°F to 158°F)
Vochtigheid 10% - 90% rel. luchtvochtigheid
Fysieke eigenschappen
Breedte product 20 mm [0.8 in]
Form Factor Aangesloten kabel
Gewicht product 22 g [0.8 oz]
Hoogte product 14 mm [0.6 in]
Kabellengte 150 mm [5.9 in]
Kleur Zwart
Lengte product 65 mm [2.6 in]
Type behuizing Kunststof
Verpakkingsinformatie
Verzendgewicht (verpakt) 130 g [4.6 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - USB 2.0 Fast Ethernet-adapter
1 - Driver-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Mac OS X® 10.6 to 10.13
Google Chrome OS™
Linux 2.6.x to 4.11.x LTS Versions only

Certificaties

Verwante producten

USB 3.0 naar gigabit Ethernet-adapter NIC met USB-poort - zwart
USB31000SPTB
USB 3.0 naar gigabit Ethernet-adapter NIC met USB-poort - zwart

Voeg een gigabit Ethernet-poort en een USB 3.0 pass-through-poort toe aan uw laptop via één USB 3.0 poort

45,99 € exc BTW
55,65 € inc BTW
USB 3.0 naar gigabit Ethernet-adapter NIC met USB-poort - wit
USB31000SPTW
USB 3.0 naar gigabit Ethernet-adapter NIC met USB-poort - wit

Voeg een gigabit Ethernet-poort en een USB 3.0 pass-through-poort toe aan uw laptop via één USB 3.0 poort

45,99 € exc BTW
55,65 € inc BTW
USB 3.0-naar-gigabit Ethernet NIC netwerkadapter – 10/100/1000 Mbps
USB31000NDS
USB 3.0-naar-gigabit Ethernet NIC netwerkadapter – 10/100/1000 Mbps

Voeg Gigabit Ethernet-netwerkconnectiviteit toe aan een laptop of pc via een USB 3.0-poort

31,99 € exc BTW
38,71 € inc BTW

Productondersteuning

Veelgestelde vragen (FAQ)

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe.
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click AX88179, which will have a “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. Click Browse my computer for driver software.
  6. Select the Let me pick from a list of device drivers on my computer option.
  7. On the Select your device’s type from the list below screen, click Show All Devices, and click Next.

Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.

  1. Select the Have Disk option.
  2. Browse to the AX88179\your_operating_system\Manual Drivers\ folder and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the Ax88179_178a file. Click OK, and then click Next.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click AX88179, which will have “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. On the Hardware Update Wizard screen, click Install from a list or specific location (Advanced), and then click Next.
  6. Select the Don’t search, I will choose the driver to install option, and then click Next.
  7. On the Hardware Type screen, click Show All Devices, and then click Next.

Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.

  1. On the Select the Device Driver you want to install for this hardware screen, select the Have Disk option.
  2. In the Install from Disk dialog box, click Browse.
  3. Browse to the AX88179\your_operating_system\Manual Drivers\ folder and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the Ax88179_178a file. Click OK, and then click Next.
  1. Download the latest drivers from the StarTech.com website at www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Mac OS X usually saves the files to the Downloads folder that is associated with your user account and is located on the drive where Mac OS X is installed (for example, Macintosh HD\Users\your_name\Downloads).

  1. Double-click the [ASIX88179] Mac USB Network Adapter.zip file.
  2. Press and hold the Control key and click the dmg file.
  3. To mount a drive on the desktop, click Open.
  4. Double-click the drive that you just mounted on the desktop.
  5. Press and hold the Control key and click the setup file.
  6. Click Open.
  7. Complete the instructions to install the device drivers, and restart your computer when prompted to.
  8. After your computer restarts, connect the device to your computer.

Hoe gaat u te werk

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.