StarTech.com

4-poort RS232 PCI Seriële Kaart Adapter met Voedingsuitgang

Voeg 4 RS232 seriële poorten met 5V of 12V selecteerbare spanning toe aan uw computer via een PCI-slot

Productcode: PCI4S954PW

  • Vier high-speed RS232 seriële poorten met overdrachtsnelheden tot 460 kbit/s
  • Selecteerbare uitgangsspanning van 5 V of 12 V
  • Selecteerbare uitgangsspanning via pin 1/4/8/9
Bekijk meer
  • Universele PCI-kaart ondersteunt installatie in 3,3V of 5V PCI-slots
  • Voldoet aan de PCI 3.0-specificaties
  • High-performance Oxford 16C950 UART
  • 128-byte FIFO per zender en ontvanger
  • ± 15 kV ESD-bescherming op alle pins
129,99 € EUR exc BTW
157,29 € EUR inc BTW

Overzicht

De PCI4S954PW 4-poort PCI Seriële Kaart (met Voedingsuitgang) maakt van een PCI-slot vier RS232 (DB9) seriële aansluitingen en ervoor geschikte apparaten kunnen via de seriële poorten van stroom worden voorzien.

Deze PCI seriële kaart is geschikt voor vele RS232-gevoede seriële toepassingen en via de selecteerbare spanning van 5V of 12V via pin 1, 4, 8 of 9 kunt u de kaart aanpassen aan de vereisten van uw RS232-apparaten.

De 4-poort seriële kaart is een flexibele oplossing voor het toevoegen van seriële poorten aan standaard of compacte systemen, en wordt zowel met standaard als low-profile brackets geleverd, terwijl de meegeleverde breakoutkabel zorgt voor een opgeruimde verbinding.

Met levenslange garantie en gratis levenslange technische ondersteuning door StarTech.com.

StarTech.com Voordeel

  • Selecteerbare 5/12V uitgangsspanning op vier verschillende pins biedt de nodige flexibiliteit voor het aansluiten van vrijwel elk serieel apparaat dat stroom nodig heeft
  • De meegeleverde breakout-kabel maakt het tot een compleet systeem voor het toevoegen van meerdere RS-232 seriële poorten in een enkele PCI-slot
  • Inclusief low-profile en standaard montagebrackets voor gebruik in een grote verscheidenheid aan systemen

Toepassingen

Bedienen en bewaken van industriële machines in een productielijn of op een fabrieksvloer

POS-toepassingen in supermarkten of ander winkels voor het aansturen van toetsenborden, kassalades, bonprinters, kaartlezers, weegschalen en verhoogde uitstallingen

Werkplekken aan de balie van een bank in standaard of low profile versies, voor het aansturen van de seriële apparatuur zoals kassalades, kaartlezers, printers, toetsenborden / pinapparaten, pentabletten

Zelfbedieningsautomaten en seriële apparaten, zoals weegschalen, touchscreens, magnetische kaart-lezers, barcodescanners, bonprinters, labelprinters

Besturing van meerdere bewakings- / beveiligingscamera's in parkeergarages, kantoren, etc.

Standaard geldautomaten voor het aansturen van toetsenborden, bonprinters, kaartlezers, de controle touchscreen LCD's, camerabesturing, etc.

Technische specificaties

Garantie
Garantie Lifetime
Hardware
Bus type PCI / PCI-X (5 / 3.3V)
Chipsetcode PLX/Oxford - OXuPCI954
Industriestandaarden PCI 3.0
Interface Serieel
Kaarttype Standaard bracket (incl. low profile bracket)
Poorten 4
Poorttype Dongle (meegeleverd)
Prestaties
Databits 5, 6, 7, 8, 9
FIFO 128 Bytes
Flow-control Automatische in-band Xon/Xoff
Automatische out-of-band (CTS/RTS en/of DSR/DTR)
Maximale overdrachtsnelheid 460,8 kbit/s
Overspanningsbeveiliging ± 15 kV ESD op alle pins
Seriële protocol RS-232
Stopbits 1, 1.5, 2
Connector(en)
Externe poorten 4 - DB-9 (9-polig, D-Sub) Mannelijk
Interne poorten 1 - LP4 (4-polig, Molex Large Drive Power) Vrouwelijk
Type connector(en) 1 - PCI / PCI-X (universeel 3,3 & 5 V, 32-bits) Mannelijk
Software
Besturingssystemen Windows® CE 5.0, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Linux 2.4.x tot 4.4.x Alleen LTS-versies
Microsoft WHQL-gecertificeerd Ja
Voeding
Uitgangsspanning 12/5V DC
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 50°C (32°F to 122°F)
Opslagtemperatuur -20°C to 60°C (4°F to 140°F)
Vochtigheid 5 - 85% rel. luchtvochtigheid, niet-condenserend
Fysieke eigenschappen
Breedte product 15 mm [0.6 in]
Gewicht product 68 g [2.4 oz]
Hoogte product 64 mm [2.5 in]
Kleur Zwart
Lengte product 127 mm [5 in]
Verpakkingsinformatie
Verzendgewicht (verpakt) 0.4 kg [0.9 lb]
Wat wordt er meegeleverd
Meegeleverd 1 - 4-poort seriële kaart
1 - Breakout-kabel
1 - Low-profile bracket
1 - Driver-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® CE 5.0, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Linux 2.4.x tot 4.4.x Alleen LTS-versies

Certificaties

Verwante producten

2S1P PCI Seriële Parallelle Combokaart met 16550 UART
PCI2S1P
2S1P PCI Seriële Parallelle Combokaart met 16550 UART

Voeg een parallelle poort en twee RS-232 seriële poorten toe aan uw pc via een PCI-uitbreidingsslot

48,99 € exc BTW
59,28 € inc BTW

Accessoires

Productondersteuning

Veelgestelde vragen (FAQ)

Voor uw aanschaf

Yes. This PCI card uses a universal connector keyed for both 3.3V and 5V that can be used with PCI and PCI-X. This type of connector is identified as having 2 separate notches, instead of just one.

Installatie

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click PCI Serial Port, which will have a “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. Click Browse my computer for driver software.
  6. Select the Let me pick from a list of device drivers on my computer option.
  7. On the Select your device’s type from the list below screen, click Show All Devices, and click Next.

Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.

  1. Select the Have Disk option.
  2. Browse to the Windows folder, select the folder for your operating system, and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the OxMf or OxPCIeMf file. Click OK, and then click Next.

Note: If you are using a serial card that uses the OxPCIeMf file and installation fails, repeat steps 4 to 9, then browse to the Windows folder. Browse to the Serial Port Driver folder and click the oxserleg file.  Click OK, and then click Next.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click PCI Serial Port, which will have “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. On the Hardware Update Wizard screen, click Install from a list or specific location (Advanced), and then click Next.
  6. Select the Don’t search, I will choose the driver to install option, and then click Next.
  7. On the Hardware Type screen, click Show All Devices, and then click Next.

Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.

  1. On the Select the Device Driver you want to install for this hardware screen, select the Have Disk option.
  2. In the Install from Disk dialog box, click Browse.
  3. Browse to the Windows folder, select the folder for your operating system, and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the OxMf or OxPCIeMf file. Click OK, and then click Next.

Note: If you are using a serial card that uses the OxPCIeMf file and installation fails, repeat steps 4 to 10, then browse to the Windows folder. Browse to the Serial Port Driver folder and click the oxserleg file.  Click OK, and then click Next.

Hoe gaat u te werk

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Serial cables

  • Serial ports

  • Serial devices

To test your setup components, try the following:

  • Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.

  • Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the serial ports and serial device, it is recommended that you do the following:

Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.

To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:

  1. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
  2. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
  3. Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.

Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.

  1. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.

If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. 

You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.  When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.