StarTech.com

USB naar RS232 DB9/DB25 Seriële Verloopkabel - M/M

Voeg een RS232 seriële poort toe aan uw desktopcomputer of notebook met deze plug-and-play USB-kabel

Productcode: ICUSB232DB25

  • Gevoed via USB; geen externe voeding nodig
  • Seriële overdrachtsnelheden tot 250 kbit/s
  • Inclusief DB9 naar DB25 adapter voor 25-pins RS232 seriële verbinding
Bekijk meer
  • USB-overdrachtsnelheden tot 12 Mbit/s
  • Plug-and-play en hot-swappable
  • WHQL-gecertificeerde drivers
  • 90 cm lange kabel
  • Ondersteunt Remote Wake-Up van Modem en USB-stroombeheer
  • Voldoet aan de USB-specificaties versie 2.0
  • Voldoet aan de Electronics Industries Association (EIA) norm RS232-C
  • USB naar RS232 Seriële Verloopkabel
18,99 € EUR exc BTW
22,98 € EUR inc BTW

Overzicht

Met de ICUSB232DB25 USB naar RS232 DB9/DB25 Seriële Verloopkabel kunt u 9-pins (DB9) of 25-pins (DB25) RS232 seriële apparaten aansluiten op uw laptop of desktopcomputer via een USB-poort, net alsof de computer zou zijn voorzien van een ingebouwde seriële poort. Met de geïntegreerde 90cm lange kabel kan het direct vanaf het seriële apparaat worden aangesloten op de computer zonder dat er extra kabels voor nodig zijn. Deze hoogwaardige USB/RS232 seriële adapter is een kosteneffectieve oplossing die de compatibiliteitskloof overbrugt tussen moderne computers en oudere seriële randapparatuur. Het wordt geleverd met een DB9 naar DB25-adapter voor het aansluiten van allerlei seriële apparaten. Met 2-jaar garantie en gratis levenslange technische ondersteuning door StarTech.com.

StarTech.com Voordeel

  • Dit veelzijdige apparaat wordt geleverd met een 9-pins-aansluiting en een 25-pins RS232-adapter voor verschillende aansluitmogelijkheden
  • Via de geïntegreerde 90cm lange kabel kunt u rechtstreeks een verbinding leggen naar uw seriële apparaten
  • Door plug-and-play en hot-swapping kunt u deze adapter toevoegen en verwijderen zonder de computer opnieuw te moeten opstarten

Toepassingen

Ideaal voor het aansluiten van seriële apparaten op laptops of tablets via een USB-poort

Sluit industriële sensoren aan voor bewaking en beveiliging

Sluit barcodescanners en andere seriële apparaten aan op een USB-poort

Sluit een serieel modem, digitale camera of PDA met seriële synchronisatie aan op de USB-poort van uw pc

Sluit ODB/ODBII-sensoradapters aan die gebruik maken van een seriële verbinding

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type USB 2.0
Chipsetcode Prolific - PL2303
Interface Serieel
Poorten 1
Poorttype Kabeladapters
Prestaties
Databits 4, 5, 6, 7, 8
FIFO 512 Bytes
Flow-control Geen, Xon/Xoff, Hardware
Max. baudrate 230,4 Kbps
Pariteit None, Even, Odd, Mark, Space
Seriële protocol RS-232
Stopbits 1, 1.5, 2
Connector(en)
Externe poorten 1 - DB-25 (25-polig, D-Sub) Mannelijk
1 - DB-9 (9-polig, D-Sub) Mannelijk
Type connector(en) 1 - USB Type-A (4-polig) USB 2.0 Mannelijk
Software
Besturingssystemen Windows® PocketPC 2003 / 2000, Windows Mobile 5/6, CE 4.2/5.2, Embedded System 2009, XP Embedded, POS Ready 2009, 98SE, 2000, ME, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Mac OS X® 10.6 to 10.13
Linux 2.4.x to 4.11.x LTS Versions only
Microsoft WHQL-gecertificeerd Ja
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 70°C (32°F to 158°F)
Opslagtemperatuur -40°C to 85°C (-40°F to 185°F)
Vochtigheid 0% - 90% rel. luchtvochtigheid
Fysieke eigenschappen
Gewicht product 70 g [2.5 oz]
Kabellengte 0.9 m [3 ft]
Kleur Grijs
Lengte product 0.9 m [3 ft]
Type behuizing Kunststof
Verpakkingsinformatie
Verzendgewicht (verpakt) 90 g [3.2 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - 90cm lange USB seriële verloopkabel
1 - DB9 naar DB25 seriële adapter
1 - Driver-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® PocketPC 2003 / 2000, Windows Mobile 5/6, CE 4.2/5.2, Embedded System 2009, XP Embedded, POS Ready 2009, 98SE, 2000, ME, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Mac OS X® 10.6 to 10.13
Linux 2.4.x to 4.11.x LTS Versions only

Certificaties

Verwante producten

Professionele USB naar 1 Seriële Poort Adapterkabel met COM-behoud
ICUSB2321X
Professionele USB naar 1 Seriële Poort Adapterkabel met COM-behoud

Voeg een RS-232 seriële poort toe aan uw desktopcomputer of laptop via USB; behoud de COM-poort

39,99 € exc BTW
48,39 € inc BTW
Professionele USB naar 2 Seriële Poort Adapter Hub met COM-behoud
ICUSB2322X
Professionele USB naar 2 Seriële Poort Adapter Hub met COM-behoud

Voeg twee RS-232 seriële poorten toe aan uw desktopcomputer of laptop via USB

55,99 € exc BTW
67,75 € inc BTW
4 poorts USB naar RS232 seriële DB9 adapter hub
ICUSB2324
4 poorts USB naar RS232 seriële DB9 adapter hub

Voeg vier RS232 seriële poorten toe aan een notebook of pc via een enkele USB-poort

99,99 € exc BTW
120,99 € inc BTW
Professionele USB naar 4 Seriële Poort Adapter Hub met COM-behoud
ICUSB2324X
Professionele USB naar 4 Seriële Poort Adapter Hub met COM-behoud

Voeg vier RS-232 seriële poorten toe aan uw desktopcomputer of laptop via USB

123,99 € exc BTW
150,03 € inc BTW
8-poort USB naar RS232 Seriële DB9 Adapter Hub
ICUSB2328
8-poort USB naar RS232 Seriële DB9 Adapter Hub

Voeg acht RS232 seriële poorten toe aan een notebook of pc via een enkele USB-poort

251,99 € exc BTW
304,91 € inc BTW
2-poort USB naar RS232 Seriële DB9 Adapterkabel
ICUSB232C2
2-poort USB naar RS232 Seriële DB9 Adapterkabel

Voeg twee RS-232 seriële poorten toe aan uw desktopcomputer of laptop via USB

46,99 € exc BTW
56,86 € inc BTW
USB to RS232 DB9 Serial Adapter Cable with COM Retention
ICUSB232PRO
Korte USB naar RS232 Seriële DB9 Adapterkabel met COM-behoud

Voeg een RS-232 seriële poort toe aan uw desktopcomputer of laptop via USB; behoud de COM-poort

27,99 € exc BTW
33,87 € inc BTW
1,80 m Professionele RS422/485 USB Seriële Verloopkabel met COM-behoud
ICUSB422
1,80 m Professionele RS422/485 USB Seriële Verloopkabel met COM-behoud

Voeg een RS422/485 seriële poort toe aan uw computersysteem via USB; met behoud van COM-poort

62,99 € exc BTW
76,22 € inc BTW
Metal Industrial USB to RS422/RS485 Serial Adapter w/ Isolation
ICUSB422IS
1-poort Metalen Industriële USB naar RS422/485 Seriële Adapter met Isolatie

Voeg een R422/485 seriële poort toe aan uw desktopcomputer of laptop via USB

134,99 € exc BTW
163,34 € inc BTW
1-poort RS232 Seriële Ethernet Device Server - PoE Power Over Ethernet
NETRS2321POE
1-poort RS232 Seriële Ethernet Device Server - PoE Power Over Ethernet

Voor het verbinden, configureren en op afstand beheren van een RS-232 serieel apparaat via een IP-netwerk

190,99 € exc BTW
231,10 € inc BTW

Accessoires

Productondersteuning

Veelgestelde vragen (FAQ)

Installatie

Some driver installation packages may require you to disable driver signature enforcement in Windows 8, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click General.
  4. In the right pane, under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.

Some driver installation packages may require you to disable driver signature enforcement in Windows 8.1, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click Update & Recovery.
  4. In the left pane, click Recovery.
  5. Under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

You may need to disable Driver Signature Enforcement in Windows 10 to use some driver installation packages. When you disable this feature, you can install unsigned driver packages on your computer.

Note: Before you continue, save any open documents and close all of your programs. You will need to restart your computer to disable Driver Signature Enforcement.

To disable Driver Signature Enforcement, complete the following:

  1. Click the Windows icon in the taskbar.
  2. Click Power.
  3. Press and hold the Shift key and click Restart.

After your computer finishes restarting, complete the following:

  1. Click Troubleshoot Advanced Options Startup Settings > Restart.
  2. Press 7.   

When your computer finishes restarting, Driver Signature Enforcement will be disabled and you can install the drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. In the list of extracted files, right-click the Setup.exe file and select Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Once Windows has restarted, connect the USB serial adapter to your computer.
  3. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. In the list of extracted files, double-click the Setup.exe file.
  3. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  4. Once Windows has restarted, connect the USB serial adapter to your computer.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Hoe gaat u te werk

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Serial cables

  • Serial ports

  • Serial devices

To test your setup components, try the following:

  • Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.

  • Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the serial ports and serial device, it is recommended that you do the following:

Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.

To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:

  1. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
  2. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
  3. Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.

Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.

  1. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.

If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. 

You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.  When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.