12in Latching SATA to Right Angle SATA Serial ATA Cable
This 12in right-angled latching SATA cable features a (straight) female Serial ATA connector as well as a right-angled (female) SATA connector, providing a simple connection to a Serial ATA drive even if space near the drive's SATA port is limited. The cable offers latching connectors, which ensure secure connections for SATA hard drives and motherboards that support this feature.
Once the right-angled SATA connector has been inserted into the drive's SATA data port, the shaft of the cable is seated flush with the rear panel of the drive, eliminating the clutter of excess cable at the connection point - an ideal solution for small or micro form factor computer cases.
The right angled SATA cable supports high speed data transfers up to 6Gbps, and features a thin, narrow construction that helps to improve airflow within the computer case; the cable features a rugged, yet flexible design that makes it easy to make the SATA connection as needed, and is backed by StarTech.com's Lifetime Warranty.
- A cost-effective solution for creating clutter free and secure SATA drive connections in tight spaces
- Easy to use and install
- Backed by StarTech.com's lifetime warranty
|Ingram Micro Netherlands||1610446|
|Tech Data - Netherlands||4462667|
|Type en snelheid||SATA III (6 Gbps)|
|Connector A||1 - SATA (7-polig, data) Vergrendelbaar Contact|
|Connector B||1 - SATA (7-polig, data) Vergrendelbaar Contact|
|Kabellengte||304.8 mm [12 in]|
|Lengte product||304.8 mm [12 in]|
|Stijl connector||Recht naar haaks rechts|
|Verzendgewicht (verpakt)||0 kg [0 lb]|
|Wat wordt er meegeleverd|
|Meegeleverd||1 - 12in SATA to Right Angle SATA Serial ATA Cable|
Drivers en downloads
Veelgestelde vragen (FAQ)
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.