StarTech.com

18in SATA Serial ATA Data and Power Combo Cable

Power your Internal SATA hard drive from an LP4 / Molex connector on your Power Supply

Productcode: SATA18POW

  • 1x SATA (Data & Power) Receptacle
  • 1x Molex (LP4) Power Connector
  • 1x SATA Data Receptacle
Bekijk meer
  • Ondersteunt de volle SATA 3.0 bandbreedte van 6 Gbit/s
  • Compatible with both 3.5" and 2.5" SATA hard drives
  • 45 cm lange kabel
5,99 € EUR exc BTW
7,25 € EUR inc BTW
Niet beschikbaar
Eventueel op voorraad bij partners
Waar te verkrijgen

Bezoek vandaag nog onze Europese online winkel voor meer producten zoals deze!

Overzicht

The SATA18POW SATA Data and Power Cable features a combination 22-pin SATA receptacle data and power connector as well as an Molex (LP4) power connector and SATA receptacle data connector, allowing you to create a conventional Serial ATA data connection to a computer while powering the drive through an LP4 connection to the computer power supply.

This high quality SATA power/LP4 adapter cable measures 18in, providing the flexibility required to position the SATA hard drive as needed within the computer case, while eliminating the expense of upgrading the computer power supply for the sake of SATA compatibility.

Constructed of only top quality materials and designed for optimum performance and reliability this 18" SATA data and power combo cable is backed by our lifetime warranty.

StarTech.com Voordeel

  • Cost-effective solution for powering a SATA drive from an LP4 connection on the computer power supply, which eliminates the cost of a power supply upgrade for compatibility with SATA hard drives
  • Features a thin cable design, which helps reduce clutter and increase airflow within the computer/server case, for optimum system performance
  • Met levenslange garantie dooe StarTech.com voor een betrouwbare verbinding

Toepassingen

Voor het installeren van SATA harde schijven, CD-RW-stations, DVD-ROM-stations in computers met een kleine vormfactor

Voor toepassing in servers en opslagsystemen

Voor het aansluiten van SATA-opslagarrays

Technische specificaties

Garantie
Garantie Lifetime
Hardware
Type kabelmantel PVC - Polyvinyl Chloride
Prestaties
Type en snelheid SATA III (6 Gbps)
Connector(en)
Connector A 1 - LP4 (4-polig, Molex Large Drive Power) Mannelijk
1 - SATA (7-polig, data) Contact
Connector B 1 - SATA data & voeding combinatie (7+15-polig) Contact
Fysieke eigenschappen
Gewicht product 0 kg [0.1 lb]
Kabellengte 457.2 mm [18 in]
Kleur Rood
Lengte product 457.2 mm [18 in]
Verpakkingsinformatie
Verzendgewicht (verpakt) 0 kg [0.1 lb]
Wat wordt er meegeleverd
Meegeleverd 1 - 18in SATA Serial ATA Data and Power Combo Cable

Certificaties

Productondersteuning

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Hard disk drive

  • Hard drive controller (for example, motherboard)

  • SATA cable

To test your setup components, try the following:

  • Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.

  • Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:

  • Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.

  • If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.

For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.