StarTech.com

Extra 2.5in or 3.5in Hot Swap Hard Drive Tray for SATSASBAY3BK

Keep extra hard drives ready for use with the SATSASBAY3BK

Product ID: SATSASTRAYBK

  • Compatible with SATSASBAY3BK backplane
  • Supports 2.5in and 3.5in form factor SATA/SAS hard drives (HDD) and solid state drives (SSD)
  • Steel, vibration-reducing springs on side of tray
View More
  • 12 ventilation openings
  • Flammability rating of UL 94 V-0
  • Support for SATA revision I/II/III (1.5/3.0/6.0 Gbps)
$28.99 USD
Not Available
May be in stock with partners

Overview

The SATSASTRAYBK Hot Swap Hard Drive Tray is specially designed as a spare/extra 2.5in/3.5in SATA/SAS Hard Drive Tray for the SATSASBAY3BK (3 Drive Hot Swap SAS SATA Backplane) allowing you to use extra spare/replacement hard drives in addition to what is installed in the backplane/mobile rack.

To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.

This extra hard drive tray features an upgraded design with additional air vents and specially designed vibration dampening springs, providing the ideal replacement for misplaced trays or a convenient solution for having extra hard drives available for your storage solution.

The StarTech.com Advantage

  • Add either 2.5" or 3.5" SAS/SATA drives to a SATSASBAY3BK
  • Metal slide springs help reduce vibration and 12 air ventilation openings assist in keeping the drive cool
  • Maximize performance, with file transfer speeds up to 6Gbps when paired with SATA III HDD and controller

Applications

Keep spare/replacements hard drives ready for use with the SATSASBAY3BK

Use for extra hard drives for rotating backup solutions

Technical Specifications

Warranty Information
Warranty 2 Years
Software
OS Compatibility OS independent; No software or drivers required
Physical Characteristics
Color Black
Enclosure Type Aluminum and Plastic
Product Height 1.1 in [27 mm]
Product Length 6.3 in [160 mm]
Product Weight 4.1 oz [115 g]
Product Width 4.5 in [115 mm]
Packaging Information
Shipping (Package) Weight 5.4 oz [153 g]
What's in the Box
Included in Package 1 - Drive Tray
1 - Bag of drive mounting screws (2.5in/3.5in)
Supports any operating system.
No additional drivers or software required.

Certifications

Product Support

Drivers & Downloads

Frequently Asked Questions

Before You Buy

Although mobile racks can enable a Serial Attached SCSI (SAS) drive to connect using a standard Serial ATA (SATA) connector, the hard drive controller must be SAS compatible to properly support SAS drives. SAS controllers can work with SAS and SATA drives, but most SAS drives will only work with a SAS controller.

For further information about SAS and SATA interoperability, refer to the following FAQ: http://www.startech.com/faq/hard_drive_controllers_sas_drive_compatibility.

Extra 2.5in or 3.5in Hot Swap Hard Drive Tray for SATSASBAY3BK

Customer Reviews

(0 reviews)
0 out of 5 stars
Quality of Product
0
Tell us what you think of this product.


Need a little help getting started? Check out our review guidelines.