High Resolution Video DVI to VGA Converter
Convert a DVI-D (Digital) signal to work with a VGA monitor
Product ID: DVI2VGACON
- Supports resolutions up to 1920x1200
- Compact form factor
- 1ft. (305mm) DVI-D cable included
- DDC2B emulation ensures compatibility between display and source signal
The DVI2VGACON High Resolution Video DVI to VGA Converter converts a DVI-D (digital) input video signal to a VGA (analog) output, saving time and money by eliminating the need to purchase a new digital display for compatibility with DVI-D video cards or devices.
This compact adapter provides support for resolutions up to 1920x1200, allowing you to take full advantage of your VGA monitor’s capabilities. A true plug-and-play solution, the DVI-D to VGA adapter is easy to install; simply connect the DVI-D output port to the adapter using the included DVI cable, then connect a VGA monitor/projector to the VGA port on the adapter.
This product is TAA compliant and backed by a Startech.com 2-year warranty with free lifetime technical support.
- A great way to make use of older display technology with a newer signal source
- Connect your DVI video source (i.e. cable or satellite set top box, computer) to a VGA or HDTV display
- The DVI-D to VGA adapter converts DVI-D video input to Analog VGA output. A DVI source can be displayed onto a VGA or HDTV display using a VGA connector
The StarTech.com Advantage
- DVI digital to VGA conversion supporting multiple resolutions from your DVI source saves the cost and hassle of purchasing new devices for compatibility
- No configuration or driver software required for a simple installation that can be set up in minutes
- Compact unit can be easily tucked away by the source device or destination display
ALSO DEUTSCHLAND GMBH
|Active or Passive Adapter||Active|
|Maximum Analog Resolutions||1920x1200|
|Wide Screen Supported||Yes|
|Connector A||1 - DVI-I (29 pin) Female Input|
|Connector B||1 - VGA (15 pin, High Density D-Sub) Female Output|
|Center Tip Polarity||Positive|
|Output Voltage||5 DC|
|Operating Temperature||0°C to 40°C (32°F to 104°F)|
|Storage Temperature||-20°C to 60°C (-4°F to 140°F)|
|Product Height||2.4 cm [0.9 in]|
|Product Length||88 mm [3.5 in]|
|Product Width||48 mm [1.9 in]|
|Weight of Product||59 g [2.1 oz]|
|Package Height||64 mm [2.5 in]|
|Package Length||14.6 cm [5.7 in]|
|Package Width||16.8 cm [6.6 in]|
|Shipping (Package) Weight||286 g [10.1 oz]|
|What's in the Box|
|Included in Package||1 - DVI to VGA Video Converter|
|1 - DVI Cable|
|1 - USB to DC Power Cable|
|1 - User Manual|
Frequently Asked Questions
Before You Buy
Unfortunately no, this device has an intended source and an intended destination. Refer to the title of the webpage for this order.
This is an active video signal converter.
A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.
An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.
For more information about passive and active DisplayPort video signal converters, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.
For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ: https://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types:
- DVI-A (17 pin).
- DVI-D Single Link (19 pin).
- DVI-D Dual Link (25 pin).
- DVI-I Single Link (23 pin).
- DVI-I Dual Link (29 pin).
Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).
Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.
DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.
This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).
- If using a display with VGA input, use the On-Screen Display menu to perform an auto-adjust of the image.
- Adjust the resolution to be the exact resolution and refresh rate recommended by the display manufacturer.
When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
To test your setup components, try the following:
Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.
Try the following:
- Check that the monitor’s video port works with another source.
- Check that the cables between the source and the destination work with other equipment.
- Check whether the video adapter works with another source and another destination.
The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue. You may need to connect another monitor or restart the computer or source to accomplish this.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.