2 Port Auto High Speed HDMI Switch
Share a single HDMI® display between two sources - auto detects priority source signal or signal loss
Product ID: VS122HDMIU
The VS122HDMIU High Speed HDMI® Auto Switcher lets you share a display between 2 consumer electronic devices or computers and prioritize your HDMI signals. The HDMI switch features a primary and secondary HDMI input port, and automatically defaults to the signal from the primary input port. If the signal connected to the primary input port is lost, the device automatically switches to display the signal from the secondary HDMI input port.
Designed for maximum control and versatility, the high-speed HDMI auto switch box also offers manual control of connected signals with easy-to-use front panel buttons that allow you to toggle between video sources.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Automatically switch between High Speed HDMI® devices with VS122HDMIU's auto-sensing technology
- Share one display/monitor between two consumer electronics devices or computers saving the cost of purchasing additional displays
Ideal for switching between consumer electronics devices such as Blu-ray players, satellite receivers, video game consoles and other devices
Switch between computers with HDMI® output
|ALSO DEUTSCHLAND GMBH||2764085|
|Industry Standards||High Speed HDMI®, HDCP|
|Max Distance||10 m / 33 ft|
|Wide Screen Supported||Yes|
|Connector A||2 - HDMI (19 pin) Female|
|Connector B||1 - HDMI (19 pin) Female|
|Special Notes / Requirements|
|Note||Port 1 is set to have higher priority than port 2 when both signals are on|
|LED Indicators||3 - Two Green for Display Status, and one red for power.|
|Power Consumption (In Watts)||2.7|
|Humidity||10% to 85%RH|
|Operating Temperature||0°C to 70°C (32°F to 158°F)|
|Storage Temperature||-65°C to 150°C (-85°F to 302°F)|
|Product Height||15 mm [0.6 in]|
|Product Length||63 mm [2.5 in]|
|Product Weight||35 g [1.2 oz]|
|Product Width||59 mm [2.3 in]|
|Shipping (Package) Weight||0.1 kg [0.3 lb]|
|What's in the Box|
|Included in Package||1 - 2 Port Automatic HDMI 1.3 Switch|
|1 - HDMI Cable|
|1 - Instruction Manual|
Drivers & Downloads
Frequently Asked Questions
Before You Buy
This device outputs HDMI video signals. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
When you consider whether to convert an HDMI video signal to another connection type, it is important to know if the media that is being converted from the HDMI video connection is protected by High-bandwidth Digital Content Protection (HDCP). If the media is protected by HDCP, you cannot convert to analog video connections because they do not support HDCP. You may experience this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles.
|VGA||HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.|
|DisplayPort||HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.|
This device has an HDMI input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
DVI to HDMI video converters: https://www.startech.com/Cables/Audio-Video/Video-Adapter/HDMI-Cable-Adapters/.
DVI to HDMI video cables: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.
DisplayPort to HDMI passive converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Passive.
DisplayPort to HDMI active converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Active.
DisplayPort Passive and Active Conversions
The converter that you require depends on the type of DisplayPort video source that you are using. For more information about converting DisplayPort video signals, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.
When you troubleshoot issues with a video splitter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI switch, you should use an HDMI source when you test the components.
To test your setup components, try the following:
Use the cable, video switch, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video switch from your setup and test to make sure that the video source and video destination work together without the video switch.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, switch, and destination all need to support the resolution that you are using.
* Product appearance and specifications are subject to change without notice.