Home LP4SATAFM12

StarTech.com

12in SATA to Molex LP4 Power Cable Adapter - F/M

Power an LP4 Molex device from a SATA Power connection on your computer power supply

Product ID: LP4SATAFM12

Gallery (3)

1x SATA plug
1x Molex (LP4) female connector
Provides 12" in cable length

4,99 € EUR exc VAT

5,94 € EUR inc VAT

Where To Buy

Overview

The LP4SATAFM12 SATA to LP4 Power Cable Adapter enables you to power 4-pin Molex devices (i.e. hard drive, DVD-ROM drive, add-in card, etc.) from a SATA power connector on your computer power supply. Offering 12 inches in cable length, the cable allows you to position your devices as needed within the system case.

Constructed of only top quality materials and designed for optimum performance and reliability this 12in SATA to Molex Cable is backed by StarTech.com’s lifetime warranty.

The StarTech.com Advantage

Position devices as needed within your computer case, with an extended power connection
Guaranteed reliability

Applications

Power LP4 devices from a SATA power connector on your computer power supply

Technical Specifications

Product Numbers

Ingram Germany

V932953

ALSO DEUTSCHLAND GMBH

2764260

UPC Code

065030854511

Warranty Information
	Warranty	Lifetime
Connector(s)
	Connector A	1 - SATA Power (15 pin) Plug
	Connector B	1 - LP4 (4 pin; Molex-type Large Drive Power) Female
Physical Characteristics
	Cable Length	304.8 mm [12 in]
	Connector Style	Straight
	Product Height	8 mm [0.3 in]
	Product Length	304.8 mm [12 in]
	Product Weight	16 g [0.6 oz]
	Product Width	30 mm [1.2 in]
	Wire Gauge	18 AWG
Packaging Information
	Package Quantity	1
	Shipping (Package) Weight	21 g [0.7 oz]
What's in the Box
	Included in Package	1 - 12in SATA to LP4 Power Cable Adapter - F/M

Certifications

Product Support

Data Sheets

LP4SATAFM12_Datasheet.pdf
- Language: English

Frequently Asked Questions

Troubleshooting

Everything is hooked up but nothing is working. What should I do?

When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

Power supply
Computer part
Power cable

To test your setup components, try the following:

Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cable, it is recommended that you do the following:

Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.

Copy Link

Was this information helpful? Yes No

Compliance and Safety

Compliance Letters

Country of Origin (COO)
- Language: English
Letter of Conformity (LOC)
- Language: English
Waste Electrical and Electronic Equipment Directive (WEEE)
- Language: English

Safety Measures

If product has an exposed circuit board, do not touch the product under power.
If Class 1 Laser Product. Laser radiation is present when the system is open.
Wiring terminations should not be made with the product and/or electric lines under power.
Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.

Are you in the United States?

CHAT LIVE

Categories

Browse By