Product ID: LTCUB1MGR
In stock: CA: 32 | US: 1791
This USB multi-charging cable a single-cable solution that makes it easy to charge and sync your Apple Lightning or Android devices.
Keep this USB to Micro-USB, USB-C or Lightning cable on hand for all your charging needs, instead of carrying multiple cables. The 3-in-1 cable makes it easy for you to switch between different device models and platforms. Note that it will only connect to one device at a time.
Charge your devices from a USB wall charger, car charger, or power bank. The longer cable offers a greater range, so you can access your device conveniently even while it’s connected to a charger.
With a braided nylon jacket, this durable charging cable doesn’t kink or tangle as easily as non-braided cables do. It’s an excellent replacement for any of your charging cables.
To charge or sync a USB-C or Lightning mobile device, simply attach the corresponding connector to the Micro-USB connector and plug into your device. To charge or sync a Micro-USB device, plug just the middle connector of the cable into your mobile device.
The cable will only charge or sync one device at a time.
LTCUB1MGR is Apple MFi certified and backed by StarTech.com 2-year warranty to ensure dependable performance.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Connector A||USB Type-A (4 pin) USB 2.0|
|1 - Connector B||Apple Lightning Connector (8-pin)|
|USB Type-C (24-pin) USB 2.0 (480Mbps)|
|USB Micro-B (5 pin)|
|Cable Jacket Material||Braided|
|Cable Shield Material||Aluminum-Mylar Foil with Braid|
|Packaging Information||Shipping (Package) Weight||3.0 oz [85.0 g]|
|Package Length||7.8 in [19.8 cm]|
|Package Width||5.9 in [15.0 cm]|
|Package Height||0.8 in [20.0 mm]|
|Performance||Type and Rate||USB 2.0 - 480 Mbit/s|
|Wire Gauge||22/28 AWG|
|Cable Length||39.4 in [100 cm]|
|Product Length||39.4 in [100.0 cm]|
|Product Width||0.6 in [15.0 mm]|
|Product Height||0.3 in [7.0 mm]|
|Weight of Product||1.3 oz [38.0 g]|
|What's in the Box||1 - Included in Package||Lightning or USB-C or Micro-B to USB-A Cable|
When you troubleshoot issues with a Lightning cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
USB port or controller card
To test your setup components, try the following:
Use the mobile device, USB controller card, and Lightning cable in another setup to see if the problem is with the components or the setup.
Use a different mobile device, USB port, and Lightning cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the mobile device, USB port or controller card, and Lightning cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted in the USB and Lightning ports.
If you are using a USB charging adapter, verify that the USB output can power other USB devices.
Check out our review guidelines.