Product search
Discontinued

2 Port CardBus eSATA Laptop Adapter Card

Adds 2 eSATA ports to a laptop through a CardBus slot

Product ID: CBESATA2

0 stars (0 reviews) |
  • Two external Serial ATA (eSATA) ports
  • Supports two high-speed eSATA channels for SATAI/II device connections
  • Plug and Play installation gets you up and running instantly

This 2 port eSATA CardBus Adapter offers a cost-effective external storage solution that allows notebook users to experience the high performance capability of external Serial ATA.

Ideal for making routine backups or dumping data to external hard drives, the eSATA CardBus Adapter presents a convenient way to protect your valuable data, with full external SATA data transfer speeds of up to 150MBps.

Applications

  • Gives you 2 eSATA ports from your laptop
  • Enables effortless transport of high-capacity and high-performance Serial ATA hard drives
  • With a quicker maximum data transfer rate (150MBps), it makes it easier to do data off loads

The StarTech.com Advantage

  • Gives you 2 eSATA ports from your laptop
  • Free Lifetime Technical Support
  • StarTech.com's Lifetime Warranty
  • With a maximum data transfer rate of 150MBps, it makes it easier to do data off loads

Partner Numbers

  • UPC 065030824552

Compatibility

Specifications

Warranty Information Warranty Lifetime
Connector(s) 1 - Connector Type(s) PC Card (Type II, Cardbus)
2 - External Ports eSATA (7 pin, Data)
Hardware Ports 2
Interface eSATA
Bus Type CardBus (PCMCIA)
Chipset ID Initio - INIC-1623
Packaging Information Package Length 8.3 in [21 cm]
Package Width 1.6 in [41 mm]
Package Height 5.7 in [14.5 cm]
Shipping (Package) Weight 4.9 oz [140 g]
Performance Maximum Data Transfer Rate 1.5 Gbps
Type and Rate SATA II (3 Gbps)
Port Multiplier No
Hardware Raid Supported No
Software OS Compatibility Windows 98SE/ ME/ 2000/ XP (32/64-bit)
What's in the Box 1 - Included in Package eSATA Cardbus Adapter
Driver CD
User Manual

Accessories

ESATA6

6 ft Shielded External eSATA Cable M/M

Connect your external SATA storage devices to your Laptop or desktop.

Your price
$27.99CAD

In stock: CA: 56 | US: 399

Where to buy StarTech.com products
ESATA3

3 ft Shielded External eSATA Cable M/M

Connect your external SATA storage devices to your Laptop or desktop.

Your price
$19.99CAD

In stock: CA: 123 | US: 343

Where to buy StarTech.com products

Drivers/Downloads

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Driver(s):

Manual(s):

Datasheet

Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Frequently Asked Questions

Troubleshooting

When you troubleshoot issues with a hard drive controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • IDE, SATA, and eSATA cables

  • Hard drives

  • Hard drive controller card

To test your setup components, try the following:

  • Use the IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in another setup to see if the problem is with the components or the setup.

  • Use a different IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hard drive and hard drive controller card, it is recommended that you do the following:

  1. To open the Device Manager, press the Windows key + R, type devmgmt.msc, and press Enter. Check the IDE ATA/ATAPI controllers (for IDE) section, or the Storage controllers (for SATA) section.

  2. Do one of the following:

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.

  1. To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.

  2. If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive does not show up in Computer or My Computer until it has a drive letter assigned to it.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(0 reviews)
0 out of 5 stars
  • 5 (0)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (0)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

Wait...
Back to top