Product search
Discontinued

3.5in Hard Drive Bracket Kit for 5.25in Front Bay with Triple Fans

Product ID: FANDRIVE

0 stars (0 reviews) |
  • Uses three high-efficiency, ultra-quiet cooling fans
  • Fits into a standard 5.25" drive bay
  • Includes power splitter cable to draw power from your PC without reducing the total number of existing power connectors

This front panel HDD cooler features three 40mm x 40mm x 20mm ball bearing fans, helping to eliminate the heat that can build up at the front of a PC case as a result of typical drive/system operation.

The HDD cooler can be mounted in an available 5.25in half-height drive bay, with a hard drive positioned directly behind it. The HDD cooler includes 3.5in to 5.25in adapter brackets, allowing the cooler to be used with either size of drive.

The HDD cooler draws fresh, cool external air into the case through a removable, cleanable filter and blown directly over the hard drive by the quiet-running ball bearing fans - an efficient, nearly silent solution for extending the life of hot running 7200 RPM, 10000, and 15000 RPM IDE and SCSI hard drives in servers.

Applications

  • Provides extra cooling for your hard drive

The StarTech.com Advantage

  • Extends hard drive life and reliability by keeping it cooler.
  • Fits any 5.25 inch drive bay.
  • 3 reliable ball bearing fans.
  • Cleanable air filter keeps dirt out of the system.

Partner Numbers

  • UPC 065030783439

Specifications

Warranty Information Warranty 2 Years
Connector(s) 1 - Connector Type(s) LP4 (4 pin; Large Drive Power)
Hardware Fan Bearing Type Ball Bearing
Packaging Information Package Length 7.2 in [18.4 cm]
Package Width 1.9 in [48 mm]
Package Height 7.2 in [18.4 cm]
Shipping (Package) Weight 9.5 oz [270 g]
Performance Fan RPM 5000 +/- 10%
Air Flow Rate 4.17 CFM (each)
General Specifications Enclosure: Plastic
Fan: Plastic
Construction:
Fan Type: Ball Bearing
Grams : 249
Lbs: 0.55
Weight :
Hard Drive Type : IDE & SCSI
Hard Drive Size: 3.5 inches
Bay: 5.25 inches
Hard Drive Requirements:
Millimeters: 150 x 40
Inches: 5.91 x 1.58
Enclosure Dimension:
Millimeters : 40 x 40 x 20
Inches: 1.57 x 1.57 x 0.78
Fan Dimension:
Connector: LP4
Life Expectancy: 45,000 hrs
Mounting Kit: Included
Filter Type: Mesh
Noise Level (dB): 38
Number of Fans: 3
Physical Characteristics Color Beige
What's in the Box 1 - Included in Package FAN
BRACKET
SET OF SCREWS

Drivers/Downloads

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Datasheet

Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(0 reviews)
0 out of 5 stars
  • 5 (0)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (0)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

Wait...
Back to top