Product ID: SAT2510SCB
The SAT2510SCB External Hard Drive Enclosure transforms any 2.5" SATA (SATA, SATA II, SATA III) hard drive or solid state drive (SSD) into a portable USB external hard drive. Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computer's storage/backup capabilities.
Designed to provide convenience and portability, the hard drive enclosure features a built-on USB 2.0 cable and a durable yet lightweight aluminum construction that fits perfectly in your pocket or laptop bag when not in use.
To simplify connection to the host desktop or laptop computer, the enclosure can be powered through its built-on USB connection, eliminating the need for an external power supply and having to find a suitable power outlet while making it easier to backup data or load stored files.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Drive Connectors||SATA Data & Power Combo (7+15 pin)|
|1 - Host Connectors||USB Type-A (4 pin) USB 2.0|
|Environmental||Operating Temperature||0°C to 70°C (32°F to 158°F)|
|Storage Temperature||-20°C to 75°C (-4°F to 167°F)|
|Humidity||10 to 90% RH|
|Number of Drives||1|
|Compatible Drive Types||SATA|
|Chipset ID||SunplusIT - SPIF301|
|Indicators||1 - LED Indicators||Blue Power and Activity|
|Packaging Information||Package Length||7.2 in [18.3 cm]|
|Package Width||1.6 in [41 mm]|
|Package Height||6.0 in [15.2 cm]|
|Shipping (Package) Weight||9.9 oz [280 g]|
|Performance||Type and Rate||USB 2.0 - 480 Mbit/s|
|Hardware Raid Supported||No|
|Max Drive Capacity||Currently tested with up to 1TB 5400 RPM hard drives|
|Max Drive Height||0.4 in [9.5 mm]|
|Product Length||5.2 in [13.1 cm]|
|Product Width||3.3 in [84 mm]|
|Product Height||0.6 in [1.6 cm]|
|Weight of Product||5.1 oz [145 g]|
|Power||Power Source||Not Included (not required for standard applications)|
|Output Voltage||5 DC|
|Center Tip Polarity||Positive|
|Software||OS Compatibility||OS independent; No software or drivers required|
|What's in the Box||1 - Included in Package||2.5" Aluminum Enclosure with Integrated USB Cable|
|Extension USB Y cable|
|Package of screws|
Reliably extend the distance of a USB 2.0 device an additional 15ft
In stock: CA: 219 | US: 4418
Extend the distance between your USB 2.0 devices by 10ft
In stock: CA: 170 | US: 561
Extend a USB port from the back of your computer to your desktop
In stock: CA: 211 | US: 4507
Extends the length your current USB device cable by 6 inches
In stock: CA: 331 | US: 0
When you troubleshoot issues with a hard drive enclosure, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
When you test the hard drive and hard drive enclosure, it is recommended that you do the following:
Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.
Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.
To confirm that the Mac OS detects your USB device, complete the following:
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
Hard drive enclosures require power from your system's USB port. Although you can plug in any standard SATA drive, USB ports only supply a limited amount of power and are not able to power all of the hard drives plugged into the system.
The power capabilities of the USB port combined with the power requirements of the attached hard drive will determine if the hard drive enclosure will work in your setup. The power (in mA) supplied by the USB port must be greater than the requirements of the hard drive.
A USB 2.0 port can supply a maximum of 500 mA (0.5 A), and a USB 3.0 port can supply a maximum of 900 mA (0.9 A).
You can usually find the power requirements of your hard drive in the technical specifications on the label of the hard drive or on the manufacturer's website.